X-Git-Url: https://git.nmode.ca/signal-cli/blobdiff_plain/a0f04a9bc1ddb2128d78fbfc0edf98c74bdabd7d..b9f66248ac82422f9fac644737857478b7f2d075:/CHANGELOG.md

diff --git a/CHANGELOG.md b/CHANGELOG.md
index 52c9a860..c35f160a 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -2,6 +2,140 @@
 
 ## [Unreleased]
 
+## [0.10.3] - 2022-02-01
+### Added
+- MessageSendLog to cache sent message for 24h.
+  For resending messages in case the recipient fails to decrypt the message.
+- New global `--log-file` parameter to write logs to a separate file.
+  (`--verbose` can be used to increase the log level)
+
+### Improved
+- Better subscription handling for JSON-RPC `subscribeReceive` command
+
+### Fixed
+- Output receipt data for unsealed sender receipts again
+- Fix sending message resend requests to devices that happen to have the same deviceId
+
+## [0.10.2] - 2022-01-22
+### Fixed
+- Archive old sessions/sender keys when a recipient's identity key has changed
+- Fix profile fetch with an invalid LANG variable
+
+## [0.10.1] - 2022-01-16
+### Added
+- Send group messages with sender keys (more efficient for larger groups)
+- New command `listStickerPacks` to display all known sticker packs
+- New flag `--sticker` for `send` command to send stickers
+
+### Changed
+- Improve exit code for message sending.
+  Exit with 0 status code if the message was sent successfully to at least
+  one recipient, otherwise exit with status code 2 or 4 (for untrusted).
+- Download profiles in parallel for improved perfomance
+- `--verbose` flag can be specified multiple times for additional log output
+- Enable more security options for systemd service file
+- Rename sandbox to staging environment, to match the upstream name.
+
+### Fixed
+- The first incoming message after registration can now always be decrypted successfully
+- Ignore decryption failures from blocked contacts and don't send a resend request.
+
+## [0.10.0] - 2021-12-11
+**Attention**: Now requires Java 17 and libsignal-client version 0.11
+
+### Added
+- The daemon command now provides a JSON-RPC based socket interface (`--socket` and `--tcp`)
+- New daemon command flag `--receive-mode` to configure when messages are received
+- New daemon command flag `--no-receive-stdout` to prevent outputting messages on stdout
+- New command `listAccounts` that lists all registered local accounts
+- New command `removeContact`
+- Extend `send` command to allow sending mentions (`--mention`) and quotes (`--quote-timestamp`, `--quote-author`, `--quote-message`, `--quote-mention`)
+- New dbus methods sendGroupTying, unregister, deleteAccount
+- New dbus events MessageReceivedV2, ReceiptReceivedV2, SyncMessageReceivedV2 that provide an extras parameter with additional message info as a key/value map
+- New dbus method sendViewedReceipt (Thanks @John Freed)
+- New dbus object Configuration to read and update configuration values (Thanks @John Freed)
+- Payment info in json receive output (Thanks @technillogue)
+- `-c` alias for `--config` (Thanks @technillogue)
+
+### Changed
+- libzkgroup dependency is no longer required
+- Renamed `-u` and `--username` flags to `-a` and `--account` to prevent confusion with upcoming Signal usernames. The old flags are also still supported for now.
+- Respect phone number sharing mode and unlisted state set by main device
+- Adapt register command to reactivate account if possible.
+- dbus-java now uses Java 16 native unix sockets, which should provide better cross-platform compatibility
+- If sending to a recipient fails (e.g. unregistered) signal-cli now exits with a success exit code and prints additional information about the failure.
+
+### Fixed
+- Registering an existing unregistered account now works reliably in daemon mode
+- Fixed an issue with loading some old config files without UUID
+- More reliable send behavior if some recipients are unregistered
+
+## [0.9.2] - 2021-10-24
+### Fixed
+- dbus `listNumbers` method works again
+
+### Changed
+- Improved provisioning error handling if the last steps fail
+- Adapt behavior of receive command as dbus client to match normal mode
+- Update captcha url for proof required handling
+
+## [0.9.1] - 2021-10-16
+**Attention**: Now requires native libzkgroup version 0.8
+
+### Added
+- New command `updateConfiguration` which allows setting configurations for linked devices
+- Improved dbus daemon for group handling, groups are now exported as separate dbus objects
+- Linked devices can be managed via dbus
+- New dbus methods sendTyping and sendReadReceipt (Thanks @JtheSaw)
+- New dbus methods submitRateLimitChallenge, isRegistered, listDevices, setExpirationTimer, sendContacts, sendSyncRequest, uploadStickerPack, setPin and removePin (Thanks @John Freed)
+- New dbus method getSelfNumber
+
+### Fixed
+- Do not send message resend request to own device
+- Allow message from pending member to accept group invitations
+- Fix issue which could cause signal-cli to repeatedly send the same delivery receipts
+- Reconnect websocket after connection loss
+
+### Changed
+- Use new provisioning URL `sgnl://linkdevice` instead of `tsdevice:/`
+- The gradle command to build a graalvm native image is now `./gradlew nativeCompile`
+
+## [0.9.0] - 2021-09-12
+**Attention**: Now requires native libsignal-client version 0.9
+
+### Breaking changes
+- Removed deprecated `--json` parameter, use global parameter `--output=json` instead
+- Json output format of `listGroups` command changed:
+  Members are now arrays of `{"number":"...","uuid":"..."}` objects instead of arrays of strings.
+- Removed deprecated fallback data paths, only `$XDG_DATA_HOME/signal-cli` is used now
+  For those still using the old paths (`$HOME/.config/signal`, `$HOME/.config/textsecure`) you need to move those to the new location.
+
+### Added
+- New global parameter `--trust-new-identities=always` to allow trusting any new identity key without verification
+- New parameter `--device-name` for `updateAccount` command to change the device name (also works for the main device)
+- New SignalControl DBus interface, to register/verify/link new accounts
+- New `jsonRpc` command that provides a JSON-RPC based API on stdout/stdin
+- Support for announcement groups
+- New parameter `--set-permission-send-messages` for `updateGroup` to create an announcement group
+- New `sendReceipt` command to send read and viewed receipts
+- Support for receiving sender key messages, mobile apps can now send messages more efficiently with server-side fan-out to groups with signal-cli members.
+- Support for reading data from remote Signal storage. Now v2 groups will be shown after linking a new device.
+- New `submitRateLimitChallenge` command that can be used to lift some rate-limits by solving a captcha
+
+### Fixed
+- Store identity key correctly when sending a message after a recipient has changed keys
+
+## [0.8.5] - 2021-08-07
+### Added
+- Source name is included in JSON receive output (Thanks @technillogue)
+
+### Fixed
+- Allow updateContact command to only set expiration timer without requiring a name parameter
+
+## [0.8.4.1] - 2021-06-20
+### Fixed
+- Incorrect error handling in register command
+
 ## [0.8.4] - 2021-06-13
 **Attention**: Now requires native libsignal-client version 0.8.1
 
@@ -153,6 +287,142 @@ See https://github.com/AsamK/signal-cli/wiki/Provide-native-lib-for-libsignal fo
 ### Fixed
 - Issue where some messages were sent with an old counter index
 
-## Older
-
-Look at the [release tags](https://github.com/AsamK/signal-cli/releases) for information about older releases.
+## [0.6.11] - 2020-10-14
+- Fix issue with receiving message reactions
+
+## [0.6.10] - 2020-09-11
+- Fix issue when retrieving profiles
+- Workaround issue with libzkgroup on platforms other than linux x86_64
+
+## [0.6.9] - 2020-09-10
+- Minor bug fixes and improvements
+- dbus functionality now works on FreeBSD
+- signal-cli now requires Java 11
+
+**Warning: this version only works on Linux x86_64, will be fixed in 0.6.10**
+
+## [0.6.8] - 2020-05-22
+- Switch to hypfvieh dbus-java, which doesn't require a native library anymore (drops requirement of libmatthew-unix-java)
+- Bugfixes for messages with uuids
+- Add `--expiration` parameter to `updateContact` command to set expiration timer
+
+## [0.6.7] - 2020-04-03
+- Send command now returns the timestamp of the sent message
+- DBus daemon: Publish received sync message to SyncMessageReceived signal
+- Fix issue with resolving e164/uuid addresses for sessions
+- Fix pack key length for sticker upload
+
+## [0.6.6] - 2020-03-29
+- Added listContacts command
+- Added block/unblock commands to block contacts and groups
+- Added uploadStickerPack command to upload sticker packs (see man page for more details)
+- Full support for sending and receiving unidentified sender messages
+- Support for message reactions with emojis
+- Internal: support recipients with uuids
+
+## [0.6.5] - 2019-11-11
+Supports receiving messages sent with unidentified sender
+
+## [0.6.4] - 2019-11-02
+- Fix rounding error for attachment ids in json output
+- Add additional info to json output
+- Add commands to update profile name and avatar
+- Add command to update contact names
+
+## [0.6.3] - 2019-09-05
+Bug fixes and small improvements
+
+## [0.6.2] - 2018-12-16
+- Fixes sending of group messages
+
+## [0.6.1] - 2018-12-09
+- Added getGroupIds dbus command
+- Use "NativePRNG" pseudo random number generator, if available
+- Switch default data path:
+  `$XDG_DATA_HOME/signal-cli` (`$HOME/.local/share/signal-cli`)
+  Existing data paths will continue to work (used as fallback)
+
+## [0.6.0] - 2018-05-03
+- Simple json output
+- dbus signal for receiving messages
+- Registration lock PIN
+- Output quoted message
+
+## [0.5.6] - 2017-06-16
+* new listGroups command
+* Support for attachments with file names
+* Support for complete contacts sync
+* Support for contact verification sync 
+* DBus interface:
+ * Get/Set group info
+ * Get/Set contact info
+
+## [0.5.5] - 2017-02-18
+- fix receiving messages on linked devices
+- add unregister command
+
+## [0.5.4] - 2017-02-17
+- Fix linking of new devices
+
+## [0.5.3] - 2017-01-29
+* New commandline paramter for receive: --ignore-attachments
+* Updated dependencies
+
+## [0.5.2] - 2016-12-16
+- Add support for group info requests
+- Improve closing of file streams
+
+## [0.5.1] - 2016-11-18
+- Support new safety numbers (https://whispersystems.org/blog/safety-number-updates/)
+- Add a man page
+- Support sending disappearing messages, if the recipient has activated it
+
+## [0.5.0] - 2016-08-29
+- Check if a number is registered on Signal, before adding it to a group
+- Prevent sending to groups that the user has quit
+- Commands to trust new identity keys (see README)
+- Messages from untrusted identities are stored on disk and decrypted when the user trusts the identity
+- Timestamps shown in ISO 8601 format
+
+## [0.4.1] - 2016-07-18
+- Fix issue with creating groups
+- Lock config file to prevent parallel access by multiple instances of signal-cli
+- Improve return codes, always return non-zero code, when sending failed
+
+## [0.4.0] - 2016-06-19
+- Linking to Signal-Desktop and Signal-Android is now possible (Provisioning)
+- Added a contact store, mainly for syncing contacts with linked devices (editing not yet possible via cli)
+- Avatars for groups and contacts are now stored (new folder "avatars" in the config path)
+
+## [0.3.1] - 2016-04-03
+- Fix running with Oracle JRE 8
+- Fix registering
+- Fix unicode warning when compiling with non utf8 locale
+
+## [0.3.0] - 2016-04-02
+- Renamed textsecure-cli to signal-cli, following the rename of libtextsecure-java to libsignal-service-java
+- The experimental dbus interface was also renamed to org.asamk.Signal
+- Upload new prekeys to the server, when there are less than 20 left, prekeys are needed to create new sessions
+
+## [0.2.1] - 2016-02-10
+- Improve dbus service
+- New command line argument --config to specify config directory
+
+## [0.2.0] - 2015-12-30
+Added an experimental dbus interface, for sending and receiving messages (The interface is unstable and may change with future releases).
+
+This release works with Java 7 and 8.
+
+## [0.1.0] - 2015-11-28
+Add support for creating/updating groups and sending to them
+
+## [0.0.5] - 2015-11-21
+- Add receive timeout commandline parameter
+- Show message group info
+
+## [0.0.4] - 2015-09-22
+
+## [0.0.3] - 2015-08-07
+
+## [0.0.2] - 2015-07-08
+First release