X-Git-Url: https://git.nmode.ca/signal-cli/blobdiff_plain/30e8e36635733b3e8c75a44e95785ba33cf55e61..9051f68ba64163690c6c0e7bc4214cb2a2f37002:/man/signal-cli.1.adoc?ds=inline

diff --git a/man/signal-cli.1.adoc b/man/signal-cli.1.adoc
index bd855ab4..a626ab61 100644
--- a/man/signal-cli.1.adoc
+++ b/man/signal-cli.1.adoc
@@ -25,7 +25,7 @@ For this use-case, it has a dbus and a JSON-RPC interface, that can be used to s
 
 For some functionality the Signal protocol requires that all messages have been received from the server.
 The `receive` command should be regularly executed.
-In daemon mode messages are continuously received.
+In daemon mode messages are by default continuously received.
 
 == Options
 
@@ -44,6 +44,7 @@ If `--verbose` is also given, the detailed logs will only be written to the log
 
 *--scrub-log*::
 Scrub possibly sensitive information from the log, like phone numbers and UUIDs.
+Doesn't work reliably on dbus logs with very verbose logging (`-vvv`)
 
 *--config* CONFIG::
 Set the path, where to store the config.
@@ -70,6 +71,9 @@ Make request via user dbus.
 *--dbus-system*::
 Make request via system dbus.
 
+*--bus-name*::
+Connect to another D-Bus bus name than the default.
+
 *-o* OUTPUT-MODE, *--output* OUTPUT-MODE::
 Specify if you want commands to output in either "plain-text" mode or in "json".
 Defaults to "plain-text"
@@ -147,9 +151,22 @@ Can fix problems with receiving messages.
 *-n* NAME, *--device-name* NAME::
 Set a new device name for the primary or linked device
 
+*--username* NAME::
+Specify a username that can then be used to contact this account.
+Returns the new username with discriminator and the username link.
+
+*--delete-username*::
+Delete the username associated with this account.
+
 *--unrestricted-unidentified-sender* {true,false}::
 Enable if anyone should be able to send you unidentified sender messages.
 
+*--discoverable-by-number* {true,false}::
+Enable/disable if the account should be discoverable by phone number
+
+*--number-sharing* {true,false}::
+Indicates if Signal should share its phone number when sending a message.
+
 === startChangeNumber
 
 Change an account to a new phone number with SMS or voice verification.
@@ -265,6 +282,9 @@ Send the message to self without notification.
 *-g* GROUP, *--group-id* GROUP::
 Specify the recipient group ID in base64 encoding.
 
+*-u* USERNAME, *--username* USERNAME::
+Specify the recipient username or username link.
+
 *-m* MESSAGE, *--message* MESSAGE::
 Specify the message.
 
@@ -336,6 +356,22 @@ Clear session state and send end session message.
 *--edit-timestamp*::
 Specify the timestamp of a previous message with the recipient or group to send an edited message.
 
+=== sendMessageRequestResponse
+
+Send response to a message request to linked devices.
+
+RECIPIENT::
+Specify the recipientsâ phone number.
+
+*-g* GROUP, *--group-id* GROUP::
+Specify the recipient group ID in base64 encoding.
+
+*-u* USERNAME, *--username* USERNAME::
+Specify the recipient username or username link.
+
+*--type* TYPE::
+Type of message request response (accept, delete)
+
 === sendPaymentNotification
 
 Send a payment notification.
@@ -359,6 +395,9 @@ Specify the recipientsâ phone number.
 *-g* GROUP, *--group-id* GROUP::
 Specify the recipient group ID in base64 encoding.
 
+*-u* USERNAME, *--username* USERNAME::
+Specify the recipient username or username link.
+
 *-e* EMOJI, *--emoji* EMOJI::
 Specify the emoji, should be a single unicode grapheme cluster.
 
@@ -411,6 +450,9 @@ Specify the recipientsâ phone number.
 *-g* GROUP, *--group-id* GROUP::
 Specify the recipient group ID in base64 encoding.
 
+*-u* USERNAME, *--username* USERNAME::
+Specify the recipient username or username link.
+
 *-t* TIMESTAMP, *--target-timestamp* TIMESTAMP::
 Specify the timestamp of the message to delete.
 
@@ -700,7 +742,7 @@ Install a sticker pack for this account.
 
 *--uri* [URI]::
 Specify the uri of the sticker pack.
-e.g. https://signal.art/addstickers/#pack_id=XXX&pack_key=XXX)"
+e.g. https://signal.art/addstickers/#pack_id=XXX&pack_key=XXX
 
 === getAttachment
 
@@ -718,18 +760,36 @@ Referred to generally as recipient.
 *-g* [GROUP], *--group-id* [GROUP]::
 Alternatively, specify the group IDs for which to get the attachment.
 
-=== daemon
+=== getAvatar
 
-signal-cli can run in daemon mode and provides an experimental dbus or JSON-RPC interface.
-If no `-a` account is given, all local accounts will be exported as separate dbus objects under the same bus name.
+Gets the raw data for a specified contact, contact's profile or group avatar.
+The attachment data is returned as a Base64 String.
 
-*--dbus*::
-Export DBus interface on user bus. +
-See **signal-cli-dbus**(5) for info on the dbus interface.
+*--contact* [RECIPIENT]::
+Specify the number of a recipient.
 
-*--dbus-system*::
-Export DBus interface on system bus. +
-See **signal-cli-dbus**(5) for info on the dbus interface.
+*--profile* [RECIPIENT]::
+Specify the number of a recipient.
+
+*-g* [GROUP], *--group-id* [GROUP]::
+Alternatively, specify the group ID for which to get the avatar.
+
+=== getSticker
+
+Gets the raw data for a specified sticker.
+The attachment data is returned as a Base64 String.
+
+*--pack-id* [PACK_ID]::
+Specify the id of a sticker pack (hex encoded).
+
+*--sticker-id* [STICKER_ID]::
+Specify the index of a sticker in the sticker pack.
+
+=== daemon
+
+signal-cli can run in daemon mode and provides JSON-RPC or an experimental dbus interface.
+If no `-a` account is given, all local accounts will be loaded.
+Multiple interfaces can be used at the same time, e.g. `daemon --socket --dbus`
 
 *--socket [SOCKET]*::
 Export a JSON-RPC interface on a UNIX socket (default $XDG_RUNTIME_DIR/signal-cli/socket). +
@@ -744,6 +804,17 @@ Expose a JSON-RPC interface as http endpoint (default localhost:8080).
 The JSON-RPC endpoint is `/api/v1/rpc`. +
 See **signal-cli-jsonrpc**(5) for info on the JSON-RPC interface.
 
+*--dbus*::
+Export DBus interface on user bus. +
+See **signal-cli-dbus**(5) for info on the dbus interface.
+
+*--dbus-system*::
+Export DBus interface on system bus. +
+See **signal-cli-dbus**(5) for info on the dbus interface.
+
+*--bus-name*::
+Claim another D-Bus bus name than the default.
+
 *--ignore-attachments*::
 Donât download attachments of received messages.
 
