Implement sendPayment notification command

[signal-cli] / man / signal-cli-dbus.5.adoc

diff --git a/man/signal-cli-dbus.5.adoc b/man/signal-cli-dbus.5.adoc
old mode 100755 (executable)
new mode 100644 (file)
index 5d65c48..a475ead
--- a/man/signal-cli-dbus.5.adoc
+++ b/man/signal-cli-dbus.5.adoc
@@ -1,21 +1,22 @@
 /////
 vim:set ts=4 sw=4 tw=82 noet:
 /////
 /////
 vim:set ts=4 sw=4 tw=82 noet:
 /////

+

 :quotes.~:
 
 = signal-cli-dbus (5)
 
 == Name
 
 :quotes.~:
 
 = signal-cli-dbus (5)
 
 == Name
 

-DBus API for signal-cli - A commandline and dbus interface for the Signal messenger
+signal-cli-dbus - A commandline and dbus interface for the Signal messenger

 
 == Synopsis
 
 
 == Synopsis
 

-*signal-cli* [--verbose] [--config CONFIG] [-u USERNAME] [-o {plain-text,json}] daemon [--system]
+*signal-cli* [--verbose] [--config CONFIG] [-a ACCOUNT] [-o {plain-text,json}] daemon [--dbus] [--dbus-system]

 
 

-*dbus-send* [--system | --session] [--print-reply] --type=method_call --dest="org.asamk.Signal" /org/asamk/Signal[/_<phonenum>] org.asamk.Signal.<method> [string:<string argument>] [array:<type>:<array argument>]
+*dbus-send* [--system | --session] [--print-reply] --type=method_call --dest="org.asamk.Signal" /org/asamk/Signal[/_<phonenumber>] org.asamk.Signal.<method> [string:<string argument>] [array:<type>:<array argument>]

 
 

-Note: when daemon was started without explicit `-u USERNAME`, the `dbus-send` command requires adding the phone number in `/org/asamk/Signal/_<phonenum>`.
+Note: when daemon was started without explicit `-a ACCOUNT`, the `dbus-send` command requires adding the phone number in `/org/asamk/Signal/_<phonenumber>`.

 
 == Description
 
 
 == Description
 


@@ -29,38 +30,46 @@ method(arg1<type>, arg2<type>, ...) -> return<type>
 
 Where <type> is according to DBus specification:
 
 
 Where <type> is according to DBus specification:
 

-* <s>   : String
-* <ay>  : Byte Array
-* <aay> : Array of Byte Arrays
-* <as>  : String Array
-* <ax>  : Array of signed 64 bit integer
-* <b>   : Boolean (0|1)
-* <x>   : Signed 64 bit integer
-* <>    : no return value
+* <a> : Array of ... (comma-separated list) (array:)
+* (...) : Struct (cannot be sent via `dbus-send`)
+* <b> : Boolean (false|true) (boolean:)
+* <i> : Signed 32-bit (int) integer (int32:)
+* <o> : DBusPath object (objpath:)
+* <s> : String (string:)
+* <x> : Signed 64-bit (long) integer (int64:)
+* <y> : Unsigned 8-bit (byte) integer (byte:)
+* <> : no return value
+
+The final parenthetical value (such as "boolean:") is the type indicator used by `dbus-send`.

 
 

-Exceptions are the names of the Java Exceptions returned in the body field. They typically contain an additional message with details. All Exceptions begin with "org.asamk.Signal.Error." which is omitted here for better readability.
+Exceptions are the names of the Java Exceptions returned in the body field.
+They typically contain an additional message with details.
+All Exceptions begin with "org.asamk.Signal.Error." which is omitted here for better readability.

 
 Phone numbers always have the format +<countrycode><regional number>
 
 == Methods
 
 
 Phone numbers always have the format +<countrycode><regional number>
 
 == Methods
 

-=== Control methods
-These methods are available if the daemon is started anonymously (without an explicit `-u USERNAME`). 
-Requests are sent to `/org/asamk/Signal`; requests related to individual accounts are sent to 
-`/org/asamk/Signal/_441234567890` where the + dialing code is replaced by an underscore (_). 
-Only `version()` is activated in single-user mode; the rest are disabled.
+=== SignalControl interface
+
+These methods are available if the daemon is started in multi-account mode (without an explicit `-a ACCOUNT`).
+The exported `/org/asamk/Signal` object provides a SignalControl interface, with methods to manage accounts.
+Individual accounts are exported as separate objects and provide a Signal interface, that's described below.
+e.g. `/org/asamk/Signal/\_441234567890` where the + dialing code is replaced by an underscore (_).

 
 link() -> deviceLinkUri<s>::
 link(newDeviceName<s>) -> deviceLinkUri<s>::
 * newDeviceName : Name to give new device (defaults to "cli" if no name is given)
 * deviceLinkUri : URI of newly linked device
 
 
 link() -> deviceLinkUri<s>::
 link(newDeviceName<s>) -> deviceLinkUri<s>::
 * newDeviceName : Name to give new device (defaults to "cli" if no name is given)
 * deviceLinkUri : URI of newly linked device
 

-Returns a URI of the form "tsdevice:/?uuid=...". This can be piped to a QR encoder to create a display that
-can be captured by a Signal smartphone client. For example:
+Returns a URI of the form "sgnl://linkdevice?uuid=...".
+This can be piped to a QR encoder to create a display that can be captured by a Signal smartphone client.

 
 

-`dbus-send --session --dest=org.asamk.Signal --type=method_call --print-reply /org/asamk/Signal org.asamk.Signal.link string:"My secondary client"|tr '\n' '\0'|sed 's/.*string //g'|sed 's/\"//g'|qrencode -s10 -tANSI256`
+For example:

 
 

-Exception: Failure
+```
+dbus-send --session --dest=org.asamk.Signal --type=method_call --print-reply /org/asamk/Signal org.asamk.Signal.link string:"My secondary client" | tr '\n' '\0' | sed 's/.*string //g' | sed 's/\"//g' | qrencode -s10 -tANSI256
+```

 
 listAccounts() -> accountList<as>::
 * accountList : Array of all attached accounts in DBus object path form
 
 listAccounts() -> accountList<as>::
 * accountList : Array of all attached accounts in DBus object path form


@@ -68,308 +77,494 @@ listAccounts() -> accountList<as>::
 Exceptions: None
 
 register(number<s>, voiceVerification<b>) -> <>::
 Exceptions: None
 
 register(number<s>, voiceVerification<b>) -> <>::

-* number            : Phone number
+* number : Phone number

 * voiceVerification : true = use voice verification; false = use SMS verification
 
 Exceptions: Failure, InvalidNumber, RequiresCaptcha
 
 registerWithCaptcha(number<s>, voiceVerification<b>, captcha<s>) -> <>::
 * voiceVerification : true = use voice verification; false = use SMS verification
 
 Exceptions: Failure, InvalidNumber, RequiresCaptcha
 
 registerWithCaptcha(number<s>, voiceVerification<b>, captcha<s>) -> <>::

-* number            : Phone number
+* number : Phone number

 * voiceVerification : true = use voice verification; false = use SMS verification
 * voiceVerification : true = use voice verification; false = use SMS verification

-* captcha           : Captcha string
+* captcha : Captcha string

 
 Exceptions: Failure, InvalidNumber, RequiresCaptcha
 
 verify(number<s>, verificationCode<s>) -> <>::
 
 Exceptions: Failure, InvalidNumber, RequiresCaptcha
 
 verify(number<s>, verificationCode<s>) -> <>::

-* number            : Phone number
-* verificationCode  : Code received from Signal after successful registration request
+* number : Phone number
+* verificationCode : Code received from Signal after successful registration request

 
 Command fails if PIN was set after previous registration; use verifyWithPin instead.
 
 
 Command fails if PIN was set after previous registration; use verifyWithPin instead.
 

-Exception: Failure, InvalidNumber
+Exceptions: Failure, InvalidNumber

 
 verifyWithPin(number<s>, verificationCode<s>, pin<s>) -> <>::
 
 verifyWithPin(number<s>, verificationCode<s>, pin<s>) -> <>::

-* number            : Phone number
-* verificationCode  : Code received from Signal after successful registration request
-* pin               : PIN you set with setPin command after verifying previous registration
+* number : Phone number
+* verificationCode : Code received from Signal after successful registration request
+* pin : PIN you set with setPin command after verifying previous registration

 
 

-Exception: Failure, InvalidNumber
+Exceptions: Failure, InvalidNumber

 
 version() -> version<s>::
 * version : Version string of signal-cli
 
 Exceptions: None
 
 
 version() -> version<s>::
 * version : Version string of signal-cli
 
 Exceptions: None
 

-=== Other methods
+=== Signal interface

 
 

-updateGroup(groupId<ay>, newName<s>, members<as>, avatar<s>) -> groupId<ay>::
-* groupId  : Byte array representing the internal group identifier
-* newName  : New name of group (empty if unchanged)
-* members  : String array of new members to be invited to group
-* avatar   : Filename of avatar picture to be set for group (empty if none)
+The following methods listen to the account's object path, which is constructed as follows:

 
 

-Exceptions: AttachmentInvalid, Failure, InvalidNumber, GroupNotFound
+- for single-account mode: "/org/asamk/Signal/"
+- for multi-account mode: "/org/asamk/Signal/" + DBusNumber
+* DBusNumber: account's phone number, with underscore (_) replacing plus (+)

 
 

-updateProfile(newName<s>, about <s>, aboutEmoji <s>, avatar<s>, remove<b>) -> <>::
-* newName     : New name for your own profile (empty if unchanged)
-* about       : About message for profile (empty if unchanged)
-* aboutEmoji  : Emoji for profile (empty if unchanged)
-* avatar      : Filename of avatar picture for profile (empty if unchanged)
-* remove      : Set to 1 if the existing avatar picture should be removed
+getContactName(number<s>) -> name<s>::
+* number : Phone number
+* name : Contact's name in local storage (from the master device for a linked account, or the one set with setContactName); if not set, contact's profile name is used

 
 

-Exceptions: Failure
+Exceptions: None

 
 

+getContactNumber(name<s>) -> numbers<as>::
+* numbers : Array of phone number
+* name : Contact or profile name ("firstname lastname")

 
 

-setExpirationTimer(number<s>, expiration<i>) -> <>::
-* number     : Phone number of recipient
-* expiration : int32 for the number of seconds before messages to this recipient disappear. Set to 0 to disable expiration.
+Searches contacts and known profiles for a given name and returns the list of all known numbers.
+May result in e.g. two entries if a contact and profile name is set.

 
 

-Exceptions: Failure
+Exceptions: None

 
 

-setContactBlocked(number<s>, block<b>) -> <>::
-* number  : Phone number affected by method
-* block   : 0=remove block , 1=blocked
+getSelfNumber() -> number<s>::
+* number : Your phone number

 
 

-Messages from blocked numbers will no longer be forwarded via DBus.
+Exceptions: None

 
 

-Exceptions: InvalidNumber
+isContactBlocked(number<s>) -> blocked<b>::
+* number : Phone number
+* blocked : true=blocked, false=not blocked

 
 

-setGroupBlocked(groupId<ay>, block<b>) -> <>::
-* groupId : Byte array representing the internal group identifier
-* block   : 0=remove block , 1=blocked
+For unknown numbers false is returned but no exception is raised.

 
 

-Messages from blocked groups will no longer be forwarded via DBus.
+Exceptions: InvalidPhoneNumber

 
 

-Exceptions: GroupNotFound
+isRegistered() -> result<b>::
+isRegistered(number<s>) -> result<b>::
+isRegistered(numbers<as>) -> results<ab>::
+* number : Phone number
+* numbers : String array of phone numbers
+* result : true=number is registered, false=number is not registered
+* results : Boolean array of results

 
 

-joinGroup(inviteURI<s>) -> <>::
-* inviteURI : String starting with https://signal.group which is generated when you share a group link via Signal App
+For unknown numbers, false is returned, but no exception is raised.
+If no number is given, returns true (indicating that you are registered).

 
 

-Exceptions: Failure
+Exceptions: InvalidNumber

 
 

-quitGroup(groupId<ay>) -> <>::
-* groupId : Byte array representing the internal group identifier
+listNumbers() -> numbers<as>::
+* numbers : String array of all known numbers
+
+This is a concatenated list of all defined contacts as well of profiles known (e.g. peer group members or sender of received messages)

 
 

-Note that quitting a group will not remove the group from the getGroupIds command, but set it inactive which can be tested with isMember()
+Exceptions: None

 
 

-Exceptions: GroupNotFound, Failure
+removePin() -> <>::

 
 

-isMember(groupId<ay>) -> active<b>::
-* groupId : Byte array representing the internal group identifier
+Removes registration PIN protection.

 
 

-Note that this method does not raise an Exception for a non-existing/unknown group but will simply return 0 (false)
+Exceptions: Failure

 
 sendEndSessionMessage(recipients<as>) -> <>::
 
 sendEndSessionMessage(recipients<as>) -> <>::

-* recipients : Array of phone numbers 
+* recipients : Array of phone numbers

 
 Exceptions: Failure, InvalidNumber, UntrustedIdentity
 
 
 Exceptions: Failure, InvalidNumber, UntrustedIdentity
 

-sendGroupMessage(message<s>, attachments<as>, groupId<ay>) -> timestamp<x>::
-* message     : Text to send (can be UTF8)
+sendMessage(message<s>, attachments<as>, recipient<s>) -> timestamp<x>::
+sendMessage(message<s>, attachments<as>, recipients<as>) -> timestamp<x>::
+* message : Text to send (can be UTF8)

 * attachments : String array of filenames to send as attachments (passed as filename, so need to be readable by the user signal-cli is running under)
 * attachments : String array of filenames to send as attachments (passed as filename, so need to be readable by the user signal-cli is running under)

-* groupId     : Byte array representing the internal group identifier
-* timestamp   : Can be used to identify the corresponding signal reply
-
-Exceptions: GroupNotFound, Failure, AttachmentInvalid
-
-sendContacts() -> <>::
+* recipient : Phone number of a single recipient
+* recipients : String array of phone numbers
+* timestamp : Long, can be used to identify the corresponding Signal reply

 
 

-Sends a synchronization message with the local contacts list to all linked devices. This command should only be used if this is the primary device.
+Depending on the type of the recipient field this sends a message to one or multiple recipients.

 
 

-Exceptions: Failure
+Exceptions: AttachmentInvalid, Failure, InvalidNumber, UntrustedIdentity

 
 

-sendSyncRequest() -> <>::
+sendMessageReaction(emoji<s>, remove<b>, targetAuthor<s>, targetSentTimestamp<x>, recipient<s>) -> timestamp<x>::
+sendMessageReaction(emoji<s>, remove<b>, targetAuthor<s>, targetSentTimestamp<x>, recipients<as>) -> timestamp<x>::
+* emoji : Unicode grapheme cluster of the emoji
+* remove : Boolean, whether a previously sent reaction (emoji) should be removed
+* targetAuthor : String with the phone number of the author of the message to which to react
+* targetSentTimestamp : Long representing timestamp of the message to which to react
+* recipient : String with the phone number of a single recipient
+* recipients : Array of strings with phone numbers, should there be more recipients
+* timestamp : Long, can be used to identify the corresponding Signal reply

 
 

-Sends a synchronization request to the primary device (for group, contacts, ...). Only works if sent from a secondary device.
+Depending on the type of the recipient(s) field this sends a reaction to one or multiple recipients.

 
 

-Exception: Failure
+Exceptions: Failure, InvalidNumber

 
 sendNoteToSelfMessage(message<s>, attachments<as>) -> timestamp<x>::
 
 sendNoteToSelfMessage(message<s>, attachments<as>) -> timestamp<x>::

-* message     : Text to send (can be UTF8)
+* message : Text to send (can be UTF8)

 * attachments : String array of filenames to send as attachments (passed as filename, so need to be readable by the user signal-cli is running under)
 * attachments : String array of filenames to send as attachments (passed as filename, so need to be readable by the user signal-cli is running under)

-* timestamp   : Can be used to identify the corresponding signal reply
+* timestamp : Long, can be used to identify the corresponding Signal reply

 
 Exceptions: Failure, AttachmentInvalid
 
 
 Exceptions: Failure, AttachmentInvalid
 

-sendMessage(message<s>, attachments<as>, recipient<s>) -> timestamp<x>::
-sendMessage(message<s>, attachments<as>, recipients<as>) -> timestamp<x>::
-* message     : Text to send (can be UTF8)
-* attachments : String array of filenames to send as attachments (passed as filename, so need to be readable by the user signal-cli is running under)
-* recipient   : Phone number of a single recipient
-* recipients  : Array of phone numbers 
-* timestamp   : Can be used to identify the corresponding signal reply
+sendReadReceipt(recipient<s>, targetSentTimestamps<ax>) -> <>::
+* recipient : Phone number of a single recipient
+* targetSentTimestamps : Array of Longs to identify the corresponding Signal messages

 
 

-Depending on the type of the recipient field this sends a message to one or multiple recipients.
+Exceptions: Failure, UntrustedIdentity

 
 

-Exceptions: AttachmentInvalid, Failure, InvalidNumber, UntrustedIdentity
+sendViewedReceipt(recipient<s>, targetSentTimestamp<ax>) -> <>::
+* recipient : Phone number of a single recipient
+* targetSentTimestamp : Array of Longs to identify the corresponding signal messages

 
 

-sendTyping(recipient<s>, stop<b>) -> <>::
-* recipient             : Phone number of a single recipient
-* targetSentTimestamp   : True, if typing state should be stopped
+Exceptions: Failure, UntrustedIdentity

 
 

-Exceptions: Failure, GroupNotFound, UntrustedIdentity
+sendRemoteDeleteMessage(targetSentTimestamp<x>, recipient<s>) -> timestamp<x>::
+sendRemoteDeleteMessage(targetSentTimestamp<x>, recipients<as>) -> timestamp<x>::
+* targetSentTimestamp : Long representing timestamp of the message to delete
+* recipient : String with the phone number of a single recipient
+* recipients : Array of strings with phone numbers, should there be more recipients
+* timestamp : Long, can be used to identify the corresponding signal reply

 
 

+Depending on the type of the recipient(s) field this deletes a message with one or multiple recipients.
+
+Exceptions: Failure, InvalidNumber

 
 

-sendReadReceipt(recipient<s>, targetSentTimestamp<ax>) -> <>::
-* recipient             : Phone number of a single recipient
-* targetSentTimestamp   : Array of Longs to identify the corresponding signal messages
+sendTyping(recipient<s>, stop<b>) -> <>::
+* recipient : Phone number of a single recipient
+* stop : True, if typing state should be stopped

 
 Exceptions: Failure, UntrustedIdentity
 
 
 Exceptions: Failure, UntrustedIdentity
 

-sendGroupMessageReaction(emoji<s>, remove<b>, targetAuthor<s>, targetSentTimestamp<x>, groupId<ay>) -> timestamp<x>::
-* emoji               : Unicode grapheme cluster of the emoji
-* remove              : Boolean, whether a previously sent reaction (emoji) should be removed
-* targetAuthor        : String with the phone number of the author of the message to which to react
-* targetSentTimestamp : Long representing timestamp of the message to which to react
-* groupId             : Byte array with base64 encoded group identifier
-* timestamp           : Long, can be used to identify the corresponding signal reply
+setContactBlocked(number<s>, block<b>) -> <>::
+* number : Phone number affected by method
+* block : false=remove block, true=blocked

 
 

-Exceptions: Failure, InvalidNumber, GroupNotFound
+Messages from blocked numbers will no longer be forwarded via DBus.

 
 

-sendMessageReaction(emoji<s>, remove<b>, targetAuthor<s>, targetSentTimestamp<x>, recipient<s>) -> timestamp<x>::
-sendMessageReaction(emoji<s>, remove<b>, targetAuthor<s>, targetSentTimestamp<x>, recipients<as>) -> timestamp<x>::
-* emoji               : Unicode grapheme cluster of the emoji
-* remove              : Boolean, whether a previously sent reaction (emoji) should be removed
-* targetAuthor        : String with the phone number of the author of the message to which to react
-* targetSentTimestamp : Long representing timestamp of the message to which to react
-* recipient           : String with the phone number of a single recipient
-* recipients          : Array of strings with phone numbers, should there be more recipients
-* timestamp           : Long, can be used to identify the corresponding signal reply
+Exceptions: InvalidNumber

 
 

-Depending on the type of the recipient(s) field this sends a reaction to one or multiple recipients.
+setContactName(number<s>,name<>) -> <>::
+* number : Phone number
+* name : Name to be set in contacts (in local storage with signal-cli)

 
 

-Exceptions: Failure, InvalidNumber
+Exceptions: InvalidNumber, Failure

 
 

-sendGroupRemoteDeleteMessage(targetSentTimestamp<x>, groupId<ay>) -> timestamp<x>::
-* targetSentTimestamp : Long representing timestamp of the message to delete
-* groupId             : Byte array with base64 encoded group identifier
-* timestamp           : Long, can be used to identify the corresponding signal reply
+deleteContact(number<s>) -> <>::
+* number : Phone number

 
 

-Exceptions: Failure, GroupNotFound
+Exceptions: Failure

 
 

-sendRemoteDeleteMessage(targetSentTimestamp<x>, recipient<s>) -> timestamp<x>::
-sendRemoteDeleteMessage(targetSentTimestamp<x>, recipients<as>) -> timestamp<x>::
-* targetSentTimestamp : Long representing timestamp of the message to delete
-* recipient           : String with the phone number of a single recipient
-* recipients          : Array of strings with phone numbers, should there be more recipients
-* timestamp           : Long, can be used to identify the corresponding signal reply
+deleteRecipient(number<s>) -> <>::
+* number : Phone number

 
 

-Depending on the type of the recipient(s) field this deletes a message with one or multiple recipients.
+Exceptions: Failure
+
+setExpirationTimer(number<s>, expiration<i>) -> <>::
+* number : Phone number of recipient
+* expiration : int32 for the number of seconds before messages to this recipient disappear.
+Set to 0 to disable expiration.

 
 Exceptions: Failure, InvalidNumber
 
 
 Exceptions: Failure, InvalidNumber
 

-getContactName(number<s>) -> name<s>::
-* number  : Phone number
-* name    : Contact's name in local storage (from the master device for a linked account, or the one set with setContactName); if not set, contact's profile name is used
+setPin(pin<s>) -> <>::
+* pin : PIN you set after registration (resets after 7 days of inactivity)

 
 

-setContactName(number<s>,name<>) -> <>::
-* number  : Phone number
-* name    : Name to be set in contacts (in local storage with signal-cli)
+Sets a registration lock PIN, to prevent others from registering your number.
+
+Exceptions: Failure
+
+submitRateLimitChallenge(challenge<s>, captcha<s>) -> <>::
+* challenge : The challenge token taken from the proof required error.
+* captcha : The captcha token from the solved captcha on the Signal website.
+Can be used to lift some rate-limits by solving a captcha.
+
+Exception: IOErrorException

 
 

-getGroupIds() -> groupList<aay>::
-groupList : Array of Byte arrays representing the internal group identifiers
+updateProfile(name<s>, about<s>, aboutEmoji <s>, avatar<s>, remove<b>) -> <>::
+updateProfile(givenName<s>, familyName<s>, about<s>, aboutEmoji <s>, avatar<s>, remove<b>) -> <>::
+* name : Name for your own profile (empty if unchanged)
+* givenName : Given name for your own profile (empty if unchanged)
+* familyName : Family name for your own profile (empty if unchanged)
+* about : About message for profile (empty if unchanged)
+* aboutEmoji : Emoji for profile (empty if unchanged)
+* avatar : Filename of avatar picture for profile (empty if unchanged)
+* remove : Set to true if the existing avatar picture should be removed

 
 

-All groups known are returned, regardless of their active or blocked status. To query that use isMember() and isGroupBlocked()
+Exceptions: Failure

 
 

-getGroupName(groupId<ay>) -> groupName<s>::
-groupName : The display name of the group 
-groupId   : Byte array representing the internal group identifier
+uploadStickerPack(stickerPackPath<s>) -> url<s>::
+* stickerPackPath : Path to the manifest.json file or a zip file in the same directory
+* url : URL of sticker pack after successful upload

 
 

-Exceptions: None, if the group name is not found an empty string is returned
+Exceptions: Failure
+
+version() -> version<s>::
+* version : Version string of signal-cli
+
+Exceptions: None
+
+==== Group related methods
+
+createGroup(groupName<s>, members<as>, avatar<s>) -> groupId<ay>::
+* groupName : String representing the display name of the group
+* members : String array of new members to be invited to group
+* avatar : Filename of avatar picture to be set for group (empty if none)
+* groupId : Byte array representing the internal group identifier
+
+Exceptions: AttachmentInvalid, Failure, InvalidNumber;
+
+getGroup(groupId<ay>) -> objectPath<o>::
+* groupId : Byte array representing the internal group identifier
+* objectPath : DBusPath for the group

 
 getGroupMembers(groupId<ay>) -> members<as>::
 
 getGroupMembers(groupId<ay>) -> members<as>::

-members   : String array with the phone numbers of all active members of a group
-groupId   : Byte array representing the internal group identifier
+* groupId : Byte array representing the internal group identifier
+* members : String array with the phone numbers of all active members of a group

 
 Exceptions: None, if the group name is not found an empty array is returned
 
 
 Exceptions: None, if the group name is not found an empty array is returned
 

-listNumbers() -> numbers<as>::
-numbers : String array of all known numbers
+joinGroup(inviteURI<s>) -> <>::
+* inviteURI : String starting with https://signal.group/#

 
 

-This is a concatenated list of all defined contacts as well of profiles known (e.g. peer group members or sender of received messages)
+Behavior of this method depends on the `requirePermission` parameter of the `enableLink` method.
+If permission is required, `joinGroup` adds you to the requesting members list.
+Permission may be granted based on the group's `PermissionAddMember` property (`ONLY_ADMINS` or `EVERY_MEMBER`).
+If permission is not required, `joinGroup` admits you immediately to the group.

 
 

-getContactNumber(name<s>) -> numbers<as>::
-* numbers : Array of phone number
-* name    : Contact or profile name ("firstname lastname")
+Exceptions: Failure

 
 

-Searches contacts and known profiles for a given name and returns the list of all known numbers. May result in e.g. two entries if a contact and profile name is set.
+listGroups() -> groups<a(oays)>::
+* groups : Array of Structs(objectPath, groupId, groupName)
+** objectPath : DBusPath
+** groupId : Byte array representing the internal group identifier
+** groupName : String representing the display name of the group

 
 

-isContactBlocked(number<s>) -> state<b>::
-* number  : Phone number
-* state   : 1=blocked, 0=not blocked
+sendGroupMessage(message<s>, attachments<as>, groupId<ay>) -> timestamp<x>::
+* message : Text to send (can be UTF8)
+* attachments : String array of filenames to send as attachments (passed as filename, so need to be readable by the user signal-cli is running under)
+* groupId : Byte array representing the internal group identifier
+* timestamp : Long, can be used to identify the corresponding Signal reply

 
 

-Exceptions: None, for unknown numbers 0 (false) is returned
+Exceptions: GroupNotFound, Failure, AttachmentInvalid, InvalidGroupId

 
 

-isGroupBlocked(groupId<ay>) -> state<b>::
+sendGroupTyping(groupId<ay>, stop<b>) -> <>::

 * groupId : Byte array representing the internal group identifier
 * groupId : Byte array representing the internal group identifier

-* state   : 1=blocked, 0=not blocked
+* stop : True, if typing state should be stopped

 
 

-Exceptions: None, for unknown groups 0 (false) is returned
+Exceptions: Failure, GroupNotFound, UntrustedIdentity

 
 

-removePin() -> <>::
+sendGroupMessageReaction(emoji<s>, remove<b>, targetAuthor<s>, targetSentTimestamp<x>, groupId<ay>) -> timestamp<x>::
+* emoji : Unicode grapheme cluster of the emoji
+* remove : Boolean, whether a previously sent reaction (emoji) should be removed
+* targetAuthor : String with the phone number of the author of the message to which to react
+* targetSentTimestamp : Long representing timestamp of the message to which to react
+* groupId : Byte array representing the internal group identifier
+* timestamp : Long, can be used to identify the corresponding signal reply

 
 

-Removes registration PIN protection.
+Exceptions: Failure, InvalidNumber, GroupNotFound, InvalidGroupId
+
+sendGroupRemoteDeleteMessage(targetSentTimestamp<x>, groupId<ay>) -> timestamp<x>::
+* targetSentTimestamp : Long representing timestamp of the message to delete
+* groupId : Byte array with base64 encoded group identifier
+* timestamp : Long, can be used to identify the corresponding signal reply

 
 

-Exception: Failure
+Exceptions: Failure, GroupNotFound, InvalidGroupId

 
 

-setPin(pin<s>) -> <>::
-* pin               : PIN you set after registration (resets after 7 days of inactivity)
+==== Device related methods

 
 

-Sets a registration lock PIN, to prevent others from registering your number.
+addDevice(deviceUri<s>) -> <>::
+* deviceUri : URI in the form of "sgnl://linkdevice?uuid=..." (formerly "tsdevice:/?uuid=...") Normally displayed by a Signal desktop app, smartphone app, or another signal-cli instance using the `link` control method.

 
 

-Exception: Failure
+getDevice(deviceId<x>) -> devicePath<o>::
+* deviceId : Long representing a deviceId
+* devicePath : DBusPath object for the device

 
 

-version() -> version<s>::
-* version : Version string of signal-cli
+Exceptions: DeviceNotFound

 
 

-isRegistred -> result<b>::
-* result : Currently always returns 1=true
+listDevices() -> devices<a(oxs)>::
+* devices : Array of structs (objectPath, id, name)
+** objectPath : DBusPath representing the device's object path
+** id : Long representing the deviceId
+** name : String representing the device's name

 
 

-addDevice(deviceUri<s>) -> <>::
-* deviceUri : URI in the form of tsdevice:/?uuid=... Normally received from Signal desktop or smartphone app
+Exceptions: InvalidUri
+
+sendContacts() -> <>::

 
 

-Exception: InvalidUri
+Sends a synchronization message with the local contacts list to all linked devices.
+This command should only be used if this is the primary device.

 
 

-listDevices() -> devices<as>::
-* devices  : String array of linked devices
+Exceptions: Failure
+
+sendSyncRequest() -> <>::

 
 

-Exception: Failure
+Sends a synchronization request to the primary device (for group, contacts, ...).
+Only works if sent from a secondary device.

 
 

-removeDevice(deviceId<i>) -> <>::
-* deviceId : Device ID to remove, obtained from listDevices() command
+Exceptions: Failure

 
 

-Exception: Failure
+=== Signal.Group interface

 
 

-updateDeviceName(deviceName<s>) -> <>::
-* deviceName : New name 
+The following methods listen to the group's object path, which can be obtained from the listGroups() method and is constructed as follows:

 
 

-Set a new name for this device (main or linked).
+<ACCOUNT_PATH> + "/Groups/" + DBusGroupId

 
 

-Exception: Failure
+DBusGroupId : groupId in base64 format, with underscore (_) replacing plus (+), equals (=), or slash (/)

 
 

-uploadStickerPack(stickerPackPath<s>) -> url<s>::
-* stickerPackPath : Path to the manifest.json file or a zip file in the same directory
-* url             : URL of sticker pack after successful upload
+Groups have the following (case-sensitive) properties:

 
 

-Exception: Failure
+* Id<ay> (read-only) : Byte array representing the internal group identifier
+* Name<s> : Display name of the group
+* Description<s> : Description of the group
+* Avatar<s> (write-only) : Filename of the avatar
+* IsBlocked<b> : true=member will not receive group messages; false=not blocked
+* IsMember<b> (read-only) : always true (object path exists only for group members)
+* IsAdmin<b> (read-only) : true=member has admin privileges; false=not admin
+* MessageExpirationTimer<i> : int32 representing message expiration time for group
+* Members<as> (read-only) : String array of group members' phone numbers
+* PendingMembers<as> (read-only) : String array of pending members' phone numbers
+* RequestingMembers<as> (read-only) : String array of requesting members' phone numbers
+* Admins<as> (read-only) : String array of admins' phone numbers
+* PermissionAddMember<s> : String representing who has permission to add members *ONLY_ADMINS, EVERY_MEMBER*
+* PermissionEditDetails<s> : String representing who may edit group details *ONLY_ADMINS, EVERY_MEMBER*
+* PermissionSendMessage<s> : String representing who post messages to group *ONLY_ADMINS, EVERY_MEMBER* (note that ONLY_ADMINS is equivalent to IsAnnouncementGroup)
+* GroupInviteLink<s> (read-only) : String of the invitation link (starts with https://signal.group/#)
+
+To get a property, use (replacing `--session` with `--system` if needed):
+`dbus-send --session --dest=org.asamk.Signal --print-reply $OBJECT_PATH org.freedesktop.DBus.Properties.Get string:org.asamk.Signal.Group string:$PROPERTY_NAME`
+
+To set a property, use:
+`dbus-send --session --dest=org.asamk.Signal --print-reply $OBJECT_PATH org.freedesktop.DBus.Properties.Set string:org.asamk.Signal.Group string:$PROPERTY_NAME variant:$PROPERTY_TYPE:$PROPERTY_VALUE`
+
+To get all properties, use:
+`dbus-send --session --dest=org.asamk.Signal --print-reply $OBJECT_PATH org.freedesktop.DBus.Properties.GetAll string:org.asamk.Signal.Group`
+
+addAdmins(recipients<as>) -> <>::
+* recipients : String array of phone numbers
+
+Grant admin privileges to recipients.
+
+Exceptions: Failure
+
+addMembers(recipients<as>) -> <>::
+* recipients : String array of phone numbers
+
+Add recipients to group if they are pending members; otherwise add recipients to list of requesting members.
+
+Exceptions: Failure
+
+disableLink() -> <>::
+
+Disables the group's invitation link.
+
+Exceptions: Failure
+
+enableLink(requiresApproval<b>) -> <>::
+* requiresApproval : true=add numbers using the link to the requesting members list
+
+Enables the group's invitation link.
+
+Exceptions: Failure
+
+quitGroup() -> <>::
+Exceptions: Failure, LastGroupAdmin
+
+removeAdmins(recipients<as>) -> <>::
+* recipients : String array of phone numbers
+
+Remove admin privileges from recipients.
+
+Exceptions: Failure
+
+removeMembers(recipients<as>) -> <>::
+* recipients : String array of phone numbers
+
+Remove recipients from group.
+
+Exceptions: Failure
+
+resetLink() -> <>::
+
+Resets the group's invitation link to a new random URL starting with https://signal.group/#
+
+Exceptions: Failure
+
+=== Signal.Device interface
+
+The following methods listen to the device's object path, which is constructed as follows:
+
+<ACCOUNT_PATH> + "/Devices/" + deviceId
+
+deviceId : Number representing the device identifier (obtained from listDevices() method)
+
+Devices have the following (case-sensitive) properties:
+
+* Id<x> (read-only) : Long representing the device identifier
+* Created<x> (read-only) : Long representing the number of milliseconds since the Unix epoch
+* LastSeen<x> (read-only) : Long representing the number of milliseconds since the Unix epoch
+* Name<s> : String representing the display name of the device
+
+To get a property, use (replacing `--session` with `--system` if needed):
+`dbus-send --session --dest=org.asamk.Signal --print-reply $OBJECT_PATH org.freedesktop.DBus.Properties.Get string:org.asamk.Signal.Device string:$PROPERTY_NAME`
+
+To set a property, use:
+`dbus-send --session --dest=org.asamk.Signal --print-reply $OBJECT_PATH org.freedesktop.DBus.Properties.Set string:org.asamk.Signal.Device string:$PROPERTY_NAME variant:$PROPERTY_TYPE:$PROPERTY_VALUE`
+
+To get all properties, use:
+`dbus-send --session --dest=org.asamk.Signal --print-reply $OBJECT_PATH org.freedesktop.DBus.Properties.GetAll string:org.asamk.Signal.Device`
+
+removeDevice() -> <>::
+
+Exceptions: Failure
+
+=== Signal.Configuration interface
+
+The configuration's object path, which exists only for primary devices, is constructed as follows:
+<ACCOUNT_PATH> + "/Configuration"
+
+Configurations have the following (case-sensitive) properties:
+
+* ReadReceipts<b> : should send read receipts (true/false)
+* UnidentifiedDeliveryIndicators<b> : should show unidentified delivery indicators (true/false)
+* TypingIndicators<b> : should send/show typing indicators (true/false)
+* LinkPreviews<b> : should generate link previews (true/false)
+
+To get a property, use (replacing `--session` with `--system` if needed):
+`dbus-send --session --dest=org.asamk.Signal --print-reply $OBJECT_PATH org.freedesktop.DBus.Properties.Get string:org.asamk.Signal.Configuration string:$PROPERTY_NAME`
+
+To set a property, use:
+`dbus-send --session --dest=org.asamk.Signal --print-reply $OBJECT_PATH org.freedesktop.DBus.Properties.Set string:org.asamk.Signal.Configuration string:$PROPERTY_NAME variant:$PROPERTY_TYPE:$PROPERTY_VALUE`
+
+To get all properties, use:
+`dbus-send --session --dest=org.asamk.Signal --print-reply $OBJECT_PATH org.freedesktop.DBus.Properties.GetAll string:org.asamk.Signal.Configuration`

 
 == Signals
 
 
 == Signals
 

-SyncMessageReceived (timestamp<x>, sender<s>, destination<s>, groupId<ay>,message<s>, attachments<as>)::
+SyncMessageReceived (timestamp<x>, sender<s>, destination<s>, groupId<ay>, message<s>, attachments<as>)::
+* timestamp : Integer value that can be used to associate this e.g. with a sendMessage()
+* sender : Phone number of the sender
+* destination : DBus code for destination
+* groupId : Byte array representing the internal group identifier (empty when private message)
+* message : Message text
+* attachments : String array of filenames in the signal-cli storage (~/.local/share/signal-cli/attachments/)
+

 The sync message is received when the user sends a message from a linked device.
 
 ReceiptReceived (timestamp<x>, sender<s>)::
 * timestamp : Integer value that can be used to associate this e.g. with a sendMessage()
 The sync message is received when the user sends a message from a linked device.
 
 ReceiptReceived (timestamp<x>, sender<s>)::
 * timestamp : Integer value that can be used to associate this e.g. with a sendMessage()

-* sender    : Phone number of the sender
+* sender : Phone number of the sender

 
 This signal is sent by each recipient (e.g. each group member) after the message was successfully delivered to the device
 
 MessageReceived(timestamp<x>, sender<s>, groupId<ay>, message<s>, attachments<as>)::
 
 This signal is sent by each recipient (e.g. each group member) after the message was successfully delivered to the device
 
 MessageReceived(timestamp<x>, sender<s>, groupId<ay>, message<s>, attachments<as>)::

-* timestamp   : Integer value that is used by the system to send a ReceiptReceived reply
-* sender      : Phone number of the sender
-* groupId     : Byte array representing the internal group identifier (empty when private message)
-* message     : Message text
-* attachments : String array of filenames for the attachments. These files are located in the signal-cli storage and the current user needs to have read access there
+* timestamp : Integer value that is used by the system to send a ReceiptReceived reply
+* sender : Phone number of the sender
+* groupId : Byte array representing the internal group identifier (empty when private message)
+* message : Message text
+* attachments : String array of filenames in the signal-cli storage (~/.local/share/signal-cli/attachments/)

 
 This signal is received whenever we get a private message or a message is posted in a group we are an active member
 
 
 This signal is received whenever we get a private message or a message is posted in a group we are an active member
 


@@ -379,9 +574,9 @@ Send a text message (without attachment) to a contact::
 dbus-send --print-reply --type=method_call --dest="org.asamk.Signal" /org/asamk/Signal org.asamk.Signal.sendMessage string:"Message text goes here" array:string: string:+123456789
 
 Send a group message::
 dbus-send --print-reply --type=method_call --dest="org.asamk.Signal" /org/asamk/Signal org.asamk.Signal.sendMessage string:"Message text goes here" array:string: string:+123456789
 
 Send a group message::

-dbus-send --session --print-reply --type=method_call --dest=org.asamk.Signal /org/asamk/Signal org.asamk.Signal.sendGroupMessage  string:'The message goes here'  array:string:'/path/to/attachmnt1','/path/to/attachmnt2'  array:byte:139,22,72,247,116,32,170,104,205,164,207,21,248,77,185
+dbus-send --session --print-reply --type=method_call --dest=org.asamk.Signal /org/asamk/Signal org.asamk.Signal.sendGroupMessage string:'The message goes here' array:string:'/path/to/attachment1','/path/to/attachment2' array:byte:139,22,72,247,116,32,170,104,205,164,207,21,248,77,185

 
 

-Print the group name corresponding to a groupId; the daemon runs on system bus, and was started without an explicit `-u USERNAME`::
+Print the group name corresponding to a groupId; the daemon runs on system bus, and was started without an explicit `-a ACCOUNT`::

 dbus-send --system --print-reply --type=method_call --dest='org.asamk.Signal' /org/asamk/Signal/_1234567890 org.asamk.Signal.getGroupName array:byte:139,22,72,247,116,32,170,104,205,164,207,21,248,77,185
 
 == Authors
 dbus-send --system --print-reply --type=method_call --dest='org.asamk.Signal' /org/asamk/Signal/_1234567890 org.asamk.Signal.getGroupName array:byte:139,22,72,247,116,32,170,104,205,164,207,21,248,77,185
 
 == Authors