## [Unreleased]
+## [0.13.8] - 2024-10-26
+
+Requires libsignal-client version 0.58.2
+
+### Fixed
+
+- Fix sending large text messages
+- Fix setting message expiration timer with recent Signal apps
+
+### Improved
+
+- Add group name and timestamps on json message (Thanks @jailson-dias)
+
+## [0.13.7] - 2024-09-28
+
+Requires libsignal-client version 0.58.0
+
+### Fixed
+
+- Fix unnecessary log output
+- Fix issue with CDSI sync with invalid token
+
+## [0.13.6] - 2024-09-08
+
+Requires libsignal-client version 0.56.0
+
+### Improved
+
+- Send sync message to linked devices when sending read/viewed receipts
+
+### Fixed
+
+- Fix issue with sending to some groups
+- Fix CDSI sync if no token is stored
+- Fix possible db dead lock during storage sync
+
+## [0.13.5] - 2024-07-25
+
+Requires libsignal-client version 0.52.2
+
+### Fixed
+
+- Fixed device linking, due to new feature flag
+
+## [0.13.4] - 2024-06-06
+
+**Attention**: Now requires libsignal-client version 0.47.0
+
+### Improved
+
+- Improve username update error message
+- Update groups when using listGroups command
+
+### Fixed
+
+- Update libsignal to fix graalvm native startup
+- Fix issue with saving username link
+- Fix sendMessageRequestResponse type parameter parsing in JSON RPC mode
+- Fix getUserStatus command with only username parameter
+
+## [0.13.3] - 2024-04-19
+
+**Attention**: Now requires libsignal-client version 0.44.0
+
+### Added
+
+- Support for reading contact nickname and notes
+- Add `--internal` and `--detailed` parameters to `listContacts` command
+
+### Fixed
+
+- Fix issue with sending messages when a new session is created
+
+## [0.13.2] - 2024-03-23
+
+**Attention**: Now requires libsignal-client version 0.40.1
+
+### Added
+
+- Add `--username` parameter to `getUserStatus` command
+
+### Fixed
+
+- Fixed setting and retrieving PIN after server changes
+
+## [0.13.1] - 2024-02-27
+
+### Added
+
+- Add `--reregister` parameter to force registration of an already registered account
+
+### Fixed
+
+- Fixed rare issue with duplicate PNIs during migration
+
+### Improved
+
+- Show information when requesting voice verification without prior SMS verification
+- Username can now be set with an explicit discriminator (e.g. testname.000)
+- Improve behavior when PNI prekeys upload fails
+- Improve `submitRateLimitChallenge` error message if captcha is rejected by server
+- Only retry messages after an identity was trusted
+
+### Changed
+
+- Default number sharing to NOBODY, to match the official apps behavior.
+
+## [0.13.0] - 2024-02-18
+
+**Attention**: Now requires Java 21 and libsignal-client version 0.39.2
+
+### Breaking changes
+
+- Sending to the self number (+XXXX) now behaves the same as the `--note-to-self` parameter. To get the previous
+ behavior with notification, the `--notify-self` parameter can be added.
+
+### Added
+
+- New `--hidden` parameter for `removeContact` command
+- New `--notify-self` parameter for `send` command, for sending a non-sync message when self is part of the recipients
+ or groups.
+- New `--unrestricted-unidentified-sender`, `--discoverable-by-number`, `--number-sharing`, `--username`
+ and `--delete-username` parameter for `updateAccount` command
+- New `--bus-name` parameter for `daemon` command to use another D-Bus bus name
+- New `getAvatar` and `getSticker` commands to get avatar and sticker images
+- New `sendMessageRequestResponse` command to accept/delete message requests
+
+### Fixed
+
+- Improve issue with stale prekeys and receiving messages to PNI address
+
+### Improved
+
+- Better shutdown handling after Ctrl+C and SIGTERM
+- Implemented full remote storage sync.
+ Provides better contact and settings sync for linked devices.
+- `listContacts` doesn't list unregistered users anymore
+
+## [0.12.8] - 2024-02-06
+
+### Fixes
+
+- Update user agent
+
+## [0.12.7] - 2023-12-15
+
+**Attention**: Now requires native libsignal-client version 0.36.1
+
+### Fixes
+
+- Fix linking to an existing account
+
+## [0.12.6] - 2023-12-11
+
+### Fixes
+
+- Fix linking to an existing account
+- Fix migration from old account data
+
+## [0.12.5] - 2023-11-21
+
+### Fixes
+
+- Fix issue with joining groups by group link for new accounts
+- Fix receiving address of shared contact
+- Fix receiving sync edit messages in groups
+
+### Changed
+
+- Create safety numbers based on ACI instead of phone number
+
+## [0.12.4] - 2023-10-22
+
+### Fixes
+
+- Prevent ConcurrentModificationException
+- Update captcha help text
+
+## [0.12.3] - 2023-10-17
+
+### Added
+
+- Added `startChangeNumber` and `finishChangeNumber` commands to switch to another phone number
+- Added `--quote-attachment` parameter to `send` command
+- Added support for scannable safety numbers based on serviceId
+- Added `EditMessageReceived` signal for D-Bus interface
+- Added new exit code `5` for rate limit failures
+- Added full CDSI refresh to get current ACI/PNIs for known numbers regularly
+
+### Fixed
+
+- Correctly respond with delivery receipts for edit messages
+
+### Changed
+
+- JSON-RPC requests are now executed in parallel.
+ Clients should make sure to use the `id` field to get the correct response for a request.
+
+## [0.12.2] - 2023-09-30
+
+**Attention**: Now requires native libsignal-client version 0.32.1
+
+### Added
+
+- Added `--receive-mode` parameter for `jsonRpc` command
+- Add `libsignal_client_path` build property to override libsignal-client jar file
+
+### Changed
+
+- `jsonRpc` command now supports multi-account mode including registering and linking
+
+## [0.12.1] - 2023-08-26
+
+### Added
+
+- New `addStickerPack` command
+
+### Fixed
+
+- Fixed some issues with upgrading from older accounts
+
+### Changed
+
+- Reverted receive notification in JSON-RPC to old format, only explicit subscriptions should use the new format
+
+## [0.12.0] - 2023-08-11
+
+**Attention**: Now requires native libsignal-client version 0.30.0
+
+### Breaking changes
+
+- Adapt receive subscription notification in JSON-RPC to have payload in result field
+ - Before: `{"jsonrpc":"2.0","method":"receive","params":{"envelope":{ ... },"account":"+XXX","subscription":0}}`
+ - After:
+ `{"jsonrpc":"2.0","method":"receive","params":{"subscription":0,"result":{"envelope":{ ... },"account":"+XXX"}}}`
+
+### Added
+
+- Manage identities via DBus (Thanks @bublath)
+- Added support for SVR2 PINs
+
+### Fixed
+
+- Fixed finishLink/receive/register/verify commands for JSON-RPC
+- Update to the latest libsignal to fix various issues
+
+## [0.11.11] - 2023-05-24
+
+**Attention**: Now requires native libsignal-client version 0.25.0
+
+### Added
+
+- New `--text-style` and `--quote-text-style` flags for `send` command
+
+### Fixed
+
+- Fixed migration of older account files
+- Fix deleting old unregistered recipient
+
+## [0.11.10] - 2023-05-11
+
+**Attention**: Now requires native libsignal-client version 0.23.1
+
+### Added
+
+- Support for receiving and sending edit messages with `--edit-timestamp`
+
+## [0.11.9.1] - 2023-04-23
+
+### Fixed
+
+- Fix build with Java 20
+
+## [0.11.9] - 2023-04-22
+
+### Fixed
+
+- Workaround issue with linking to newer app versions
+
+## [0.11.8] - 2023-04-05
+
+### Added
+
+- Added file attachment attributes to JSON output (Thanks @signals-from-outer-space)
+
+### Fixed
+
+- Scrub E164 number from dbus paths
+- Fix sending large text messages to multiple recipient
+- Fix deleting old group in dbus mode
+- Fix issue with unknown identity serviceId
+
+### Improved
+
+- Relaxed Content-Type check in http daemon mode (Thanks @cedb)
+
+## [0.11.7] - 2023-02-19
+
+**Attention**: Now requires native libsignal-client version 0.22.0
+
+### Fixed
+
+- Fix issue with missing pni identity key
+- Fix graalvm sqlite issue (Thanks @Marvin A. Ruder)
+- Fix issue with forgetting recipient
+
+### Changed
+
+- Allow JSON-RPC commands without account param if only one account exists
+
+## [0.11.6] - 2022-12-18
+
+### Added
+
+- Allow using data URIs for updateGroup/updateProfile
+- New alive check endpoint for http daemon (Thanks @ced-b)
+
+### Fixed
+
+- Registration with voice verification now works if no system locale is set
+- Fixed retrieving attachments in JSON RPC mode (Thanks @ced-b)
+
+## [0.11.5.1] - 2022-11-09
+
+### Fixed
+
+- Fix updating from older signal-cli version
+
+## [0.11.5] - 2022-11-07
+
+**Attention**: Now requires native libsignal-client version 0.21.1
+
+### Added
+
+- Add `--http` flag to `daemon` command to provide a JSON-RPC http endpoint (`/api/v1/rpc`). (Thanks @ced-b)
+- The `receive` method is now also available in JSON-RPC daemon mode, for polling new messages.
+- Add `getAttachment` command to get attachment file base64 encoded. (Thanks @ced-b)
+- Add `--disable-send-log` to disable the message send log.
+- Add `--story` to `sendReaction` command, to react to stories.
+- Add `--story-timestamp` and `--story-author` to `send` command, to reply to stories.
+- Add `--max-messages` to `receive` command, to only receive a certain number of messages.
+
+### Changed
+
+- Send long text messages as attachment instead. This matches the behavior of the official clients.
+- Store attachments with a file extension, for common file types.
+
+## [0.11.4] - 2022-10-19
+
+### Added
+
+- Approve/Refuse group join requests, using same interface as adding/removing members
+- Add --ignore-stories flag to prevent receiving story messages
+
+### Fixed
+
+- Fixed issue with receiving messages that can't be decrypted
+- Do not discard incoming group join messages
+
+### Improved
+
+- Add code to receive new PNI after change number
+
+## [0.11.3] - 2022-10-07
+
+### Fixed
+
+- Fix sending messages to groups (in non-daemon mode)
+- Fix updating from older signal-cli version
+- Fix issue with handling decryption error message
+- Fix graalvm native build (Thanks @bentolor)
+
+## [0.11.2] - 2022-10-06
+
+### Fixed
+
+- Update user agent version to work with new Signal-Server check
+
+## [0.11.1] - 2022-10-05
+
+### Fixed
+
+- Fix sending group messages
+- Fix store migration issue on Windows
+- Fix building fat jars
+
+## [0.11.0] - 2022-10-02
+
+**Attention**: Now requires native libsignal-client version 0.20.0
+
+### Breaking changes
+
+- Changed meaning of `-v` flag from `--version` to `--verbose`.
+ So now extended logging can be achieved with `-vv`.
+- Remove deprecated fallback to reading from stdin if no message body is given.
+ To read a message from stdin, use the `--message-from-stdin` flag.
+
+### Added
+
+- Migrate PIN to new KBS enclave when Signal updates it
+- Add `--scrub-log` flag to remove possibly sensitive information from the log
+- Add `sendPaymentNotification` dbus method
+
+### Fixed
+
+- Fix an issue where messages were sent without sender phone number
+
+### Changed
+
+- Store data except base account data in sqlite database
+- Use new CDSI for contact discovery in compat mode
+
+## [0.10.11] - 2022-08-17
+
+**Attention**: Now requires native libsignal-client version 0.19.3
+
+### Added
+
+- Output content of received story messages
+
+## [0.10.10] - 2022-07-30
+
+**Attention**: Now requires native libsignal-client version 0.18.1
+
+### Fixed
+
+- Fix setPin/removePin commands which broke due to server side changes
+- Workaround GraalVM 22.2.0 issue with daemon connection
+
+## [0.10.9] - 2022-07-16
+
+### Changed
+
+- updateAccount command checks self number and PNI after updating account attributes
+
+### Fixed
+
+- Fixed small issue with syncing contacts from storage
+- Fixed issue with opening older account files
+
+## [0.10.8] - 2022-06-13
+
+### Added
+
+- Attachments can now be given as data: URIs with base64 data instead of just file paths (Thanks @KevinRoebert)
+- `version` command can now be used on the commandline, in addition to the `--version` flag.
+ In the next version the current short form `-v` will change its meaning to `--verbose`!
+
+### Improved
+
+- An account can now be registered on both LIVE and STAGING environment in the same config directory.
+- Logging output for registering has been extended.
+
+## [0.10.7] - 2022-05-29
+
+### Added
+
+- Added profile information to `listContacts` command output
+- Added filter flags for `listContacts` command
+- New `sendPaymentNotification` command to send payment receipt blobs
+- New `--given-name` and `--family-name` parameters for `updateContact` command
+- Implement sending link previews with `--preview-url`, `--preview-title` parameters for the `send` command
+- New `--send-read-receipts` parameter for `receive` and `daemon` commands for automatically marking received messages
+ as read
+
+### Fixed
+
+- Issue with endless growing `pre-keys-pni` data directory
+
+## [0.10.6] - 2022-05-19
+
+**Attention**: Now requires native libsignal-client version 0.17
+
+### Added
+
+- Check if account is used on the environment it was registered (live or staging)
+- New command `deleteLocalAccountData` to delete all local data of an unregistered account
+- New parameter `-g` for `listGroups` command to filter for specific groups
+
+### Fixed
+
+- Fix deleting a recipient which has no uuid
+
+### Changed
+
+- Show warning when sending a message and no profile name has been set.
+ (A profile name may become mandatory in the future)
+- After blocking a contact/group the profile key is now rotated
+- Only update profile keys from authoritative group changes
+
+## [0.10.5] - 2022-04-11
+
+**Attention**: Now requires native libsignal-client version 0.15
+
+### Added
+
+- New `--ban`, `--unban` flags for `updateGroup` command to ban users from joining by group link
+
+### Fixed
+
+- Fix plain text output of blocked group ids
+- Fix error output in case of rate limiting
+- Fix error when creating a group with no members
+- Fix adding recent Signal-Desktop versions as linked devices
+
+## [0.10.4.2] - 2022-03-17
+
+### Fixed
+
+- Crash in json output when receiving message from untrusted identity
+- Fix multi account commands for newly created accounts
+
+## [0.10.4.1] - 2022-03-02
+
+### Fixed
+
+- Linking to current apps (which currently don't include a PNI identity yet)
+- Show better error message when --target-timestamp is missing for sendReceipt
+
+## [0.10.4] - 2022-02-20
+
+### Added
+
+- Implement support for change number as linked device
+- Add `--message-from-stdin` flag for send command. The current behavior of
+ reading from stdin if the `-m` flag is not given, will be removed in a future
+ version.
+
+### Changed
+
+- Align receive timeout behavior for dbus client with cli and JSON-RPC.
+ Timeout is reset by every incoming message
+- Renamed `error` field in json receive response to `exception`
+
+### Fixed
+
+- Prevent a stale jsonrpc connection from interfering with message receiving
+
+## [0.10.3] - 2022-02-01
+
+### Added
+
+- MessageSendLog to cache sent message for 24h.
+ For resending messages in case the recipient fails to decrypt the message.
+- New global `--log-file` parameter to write logs to a separate file.
+ (`--verbose` can be used to increase the log level)
+
+### Improved
+
+- Better subscription handling for JSON-RPC `subscribeReceive` command
+
+### Fixed
+
+- Output receipt data for unsealed sender receipts again
+- Fix sending message resend requests to devices that happen to have the same deviceId
+
## [0.10.2] - 2022-01-22
+
### Fixed
+
- Archive old sessions/sender keys when a recipient's identity key has changed
- Fix profile fetch with an invalid LANG variable
## [0.10.1] - 2022-01-16
+
### Added
+
- Send group messages with sender keys (more efficient for larger groups)
- New command `listStickerPacks` to display all known sticker packs
- New flag `--sticker` for `send` command to send stickers
### Changed
+
- Improve exit code for message sending.
Exit with 0 status code if the message was sent successfully to at least
one recipient, otherwise exit with status code 2 or 4 (for untrusted).
-- Download profiles in parallel for improved perfomance
+- Download profiles in parallel for improved performance
- `--verbose` flag can be specified multiple times for additional log output
- Enable more security options for systemd service file
- Rename sandbox to staging environment, to match the upstream name.
### Fixed
+
- The first incoming message after registration can now always be decrypted successfully
- Ignore decryption failures from blocked contacts and don't send a resend request.
## [0.10.0] - 2021-12-11
+
**Attention**: Now requires Java 17 and libsignal-client version 0.11
### Added
+
- The daemon command now provides a JSON-RPC based socket interface (`--socket` and `--tcp`)
- New daemon command flag `--receive-mode` to configure when messages are received
- New daemon command flag `--no-receive-stdout` to prevent outputting messages on stdout
- New command `listAccounts` that lists all registered local accounts
- New command `removeContact`
-- Extend `send` command to allow sending mentions (`--mention`) and quotes (`--quote-timestamp`, `--quote-author`, `--quote-message`, `--quote-mention`)
+- Extend `send` command to allow sending mentions (`--mention`) and
+ quotes (`--quote-timestamp`, `--quote-author`, `--quote-message`, `--quote-mention`)
- New dbus methods sendGroupTying, unregister, deleteAccount
-- New dbus events MessageReceivedV2, ReceiptReceivedV2, SyncMessageReceivedV2 that provide an extras parameter with additional message info as a key/value map
+- New dbus events MessageReceivedV2, ReceiptReceivedV2, SyncMessageReceivedV2 that provide an extras parameter with
+ additional message info as a key/value map
- New dbus method sendViewedReceipt (Thanks @John Freed)
- New dbus object Configuration to read and update configuration values (Thanks @John Freed)
- Payment info in json receive output (Thanks @technillogue)
- `-c` alias for `--config` (Thanks @technillogue)
### Changed
+
- libzkgroup dependency is no longer required
-- Renamed `-u` and `--username` flags to `-a` and `--account` to prevent confusion with upcoming Signal usernames. The old flags are also still supported for now.
-- Respect phone number sharing mode and unlisted state set by main device
+- Renamed `-u` and `--username` flags to `-a` and `--account` to prevent confusion with upcoming Signal usernames. The
+ old flags are also still supported for now.
+- Respect phone number sharing mode and unlisted state set by primary device
- Adapt register command to reactivate account if possible.
- dbus-java now uses Java 16 native unix sockets, which should provide better cross-platform compatibility
-- If sending to a recipient fails (e.g. unregistered) signal-cli now exits with a success exit code and prints additional information about the failure.
+- If sending to a recipient fails (e.g. unregistered) signal-cli now exits with a success exit code and prints
+ additional information about the failure.
### Fixed
+
- Registering an existing unregistered account now works reliably in daemon mode
- Fixed an issue with loading some old config files without UUID
- More reliable send behavior if some recipients are unregistered
## [0.9.2] - 2021-10-24
+
### Fixed
+
- dbus `listNumbers` method works again
### Changed
+
- Improved provisioning error handling if the last steps fail
- Adapt behavior of receive command as dbus client to match normal mode
- Update captcha url for proof required handling
## [0.9.1] - 2021-10-16
+
**Attention**: Now requires native libzkgroup version 0.8
### Added
+
- New command `updateConfiguration` which allows setting configurations for linked devices
- Improved dbus daemon for group handling, groups are now exported as separate dbus objects
- Linked devices can be managed via dbus
- New dbus methods sendTyping and sendReadReceipt (Thanks @JtheSaw)
-- New dbus methods submitRateLimitChallenge, isRegistered, listDevices, setExpirationTimer, sendContacts, sendSyncRequest, uploadStickerPack, setPin and removePin (Thanks @John Freed)
+- New dbus methods submitRateLimitChallenge, isRegistered, listDevices, setExpirationTimer, sendContacts,
+ sendSyncRequest, uploadStickerPack, setPin and removePin (Thanks @John Freed)
- New dbus method getSelfNumber
### Fixed
+
- Do not send message resend request to own device
- Allow message from pending member to accept group invitations
- Fix issue which could cause signal-cli to repeatedly send the same delivery receipts
- Reconnect websocket after connection loss
### Changed
+
- Use new provisioning URL `sgnl://linkdevice` instead of `tsdevice:/`
- The gradle command to build a graalvm native image is now `./gradlew nativeCompile`
## [0.9.0] - 2021-09-12
+
**Attention**: Now requires native libsignal-client version 0.9
### Breaking changes
+
- Removed deprecated `--json` parameter, use global parameter `--output=json` instead
- Json output format of `listGroups` command changed:
Members are now arrays of `{"number":"...","uuid":"..."}` objects instead of arrays of strings.
- Removed deprecated fallback data paths, only `$XDG_DATA_HOME/signal-cli` is used now
- For those still using the old paths (`$HOME/.config/signal`, `$HOME/.config/textsecure`) you need to move those to the new location.
+ For those still using the old paths (`$HOME/.config/signal`, `$HOME/.config/textsecure`) you need to move those to the
+ new location.
### Added
+
- New global parameter `--trust-new-identities=always` to allow trusting any new identity key without verification
-- New parameter `--device-name` for `updateAccount` command to change the device name (also works for the main device)
+- New parameter `--device-name` for `updateAccount` command to change the device name (also works for the primary
+ device)
- New SignalControl DBus interface, to register/verify/link new accounts
- New `jsonRpc` command that provides a JSON-RPC based API on stdout/stdin
- Support for announcement groups
- New parameter `--set-permission-send-messages` for `updateGroup` to create an announcement group
- New `sendReceipt` command to send read and viewed receipts
-- Support for receiving sender key messages, mobile apps can now send messages more efficiently with server-side fan-out to groups with signal-cli members.
+- Support for receiving sender key messages, mobile apps can now send messages more efficiently with server-side fan-out
+ to groups with signal-cli members.
- Support for reading data from remote Signal storage. Now v2 groups will be shown after linking a new device.
- New `submitRateLimitChallenge` command that can be used to lift some rate-limits by solving a captcha
### Fixed
+
- Store identity key correctly when sending a message after a recipient has changed keys
## [0.8.5] - 2021-08-07
+
### Added
+
- Source name is included in JSON receive output (Thanks @technillogue)
### Fixed
+
- Allow updateContact command to only set expiration timer without requiring a name parameter
## [0.8.4.1] - 2021-06-20
+
### Fixed
+
- Incorrect error handling in register command
## [0.8.4] - 2021-06-13
+
**Attention**: Now requires native libsignal-client version 0.8.1
### Added
+
- New parameters for `updateGroup` command for group v2 features:
- `--description`, `--remove-member`, `--admin`, `--remove-admin`, `--reset-link`, `--link`, `--set-permission-add-member`, `--set-permission-edit-details`, `--expiration`
+ `--description`, `--remove-member`, `--admin`, `--remove-admin`, `--reset-link`, `--link`,
+ `--set-permission-add-member`, `--set-permission-edit-details`, `--expiration`
- New `--admin` parameter for `quitGroup` to set an admin before leaving the group
- New `--delete` parameter for `quitGroup`, to delete the local group data
- New 'sendTyping' command to send typing indicators
### Fixed
+
- Fixed issue that prevented registration with invalid locales
- Prevent last admin of a group from leaving the group
- All commands now show a short description with `--help`
## [0.8.3] - 2021-05-13
### Fixed
+
- Upgrading from account files with older profiles
- Building native image with graalvm
## [0.8.2] - 2021-05-11
+
### Added
+
- A manual page for the DBus interface (Thanks @bublath, @exquo)
- Remote message delete command (Thanks @adaptivegarage)
-- sendSyncRequest command to request complete contact/group list from master device
+- sendSyncRequest command to request complete contact/group list from primary device
- New `--delete-account` argument for unregister (Dangerous)
- New `--family-name` argument for updateProfile
### Fixed
+
- Sending reaction to group (Thanks @adaptivegarage)
- Displaying of address for messages from untrusted identities
- Handling of recipient number or uuid changes (e.g. after account deletions)
-- Only respond to sync requests from master device
+- Only respond to sync requests from primary device
- Display of quit group messages
### Changed
+
- Unlimited strength crypto is now enabled automatically for JREs that require it (Thanks @i-infra)
- Only one identity key is stored per recipient and updated from profile (to match app behavior)
- updateContact, block and unblock are now disabled for linked devices
- If message decryption fails due to a broken session, the session is automatically renewed
- Rework account storage for better reliability
- Improved device linking flow
- - Allow relinking existing account
- - Encrypt/Decrypt device names
+ - Allow relinking existing account
+ - Encrypt/Decrypt device names
## [0.8.1] - 2021-03-02
+
### Added
-- New dbus commands: updateProfile, listNumbers, getContactNumber, quitGroup, isContactBlocked, isGroupBlocked, isMember, joinGroup (Thanks @bublath)
+
+- New dbus commands: updateProfile, listNumbers, getContactNumber, quitGroup, isContactBlocked, isGroupBlocked,
+ isMember, joinGroup (Thanks @bublath)
- Additional output for json format: shared contacts (Thanks @Atomic-Bean)
- Improved plain text output to be more consistent and synced messages are now indented
### Fixed
+
- Issue with broken sessions with linked devices
### Changed
+
- Behavior of `trust` command improved, when trusting a new identity key all other known keys for
the same number are removed.
## [0.8.0] - 2021-02-14
-**Attention**: For all signal protocol functionality an additional native library is now required: [libsignal-client](https://github.com/signalapp/libsignal-client/).
+
+**Attention**: For all signal protocol functionality an additional native library is now
+required: [libsignal-client](https://github.com/signalapp/libsignal-client/).
See https://github.com/AsamK/signal-cli/wiki/Provide-native-lib-for-libsignal for more information.
### Added
+
- Experimental support for building a GraalVM native image
- Support for setting profile about text and emoji
### Fixed
+
- Incorrect error message when removing a non-existent profile avatar
## [0.7.4] - 2021-01-19
+
### Changed
+
- Notify linked devices after profile has been updated
### Fixed
+
- After registering a new account, receiving messages didn't work
You may have to register and verify again to fix the issue.
- Creating v1 groups works again
## [0.7.3] - 2021-01-17
+
### Added
+
- `getUserStatus` command to check if a user is registered on Signal (Thanks @Atomic-Bean)
- Global `--verbose` flag to increase log level
- Global `--output=json` flag, currently supported by `receive`, `daemon`, `getUserStatus`, `listGroups`
- More info for received messages in json output: stickers, viewOnce, typing, remoteDelete
### Changed
+
- signal-cli can now be used without the username `-u` flag
For daemon command all local users will be exposed as dbus objects.
If only one local user exists, all other commands will use that user,
- In json output unnecessary fields that are null are now omitted
### Fixed
+
- Disable registration lock before removing the PIN
- Fix PIN hash version to match the official clients.
If you had previously set a PIN you need to set it again to be able to unlock the registration lock later.
- Issue with saving account file after linking
## [0.7.2] - 2020-12-31
+
### Added
+
- Implement new registration lock PIN with `setPin` and `removePin` (with KBS)
- Include quotes, mentions and reactions in json output (Thanks @Atomic-Bean)
### Fixed
+
- Retrieve avatars for v2 groups
- Download attachment thumbnail for quoted attachments
## [0.7.1] - 2020-12-21
+
### Added
+
- Accept group invitation with `updateGroup -g GROUP_ID`
- Decline group invitation with `quitGroup -g GROUP_ID`
- Join group via invitation link `joinGroup --uri https://signal.group/#...`
### Fixed
+
- Include group ids for v2 groups in json output
## [0.7.0] - 2020-12-15
+
### Added
+
Support for groups of new type/v2
+
- Sending and receiving
- Updating name, avatar and adding members with `updateGroup`
- Quit group and decline invitation with `quitGroup`
See https://github.com/AsamK/signal-cli/wiki/Provide-native-lib-for-libsignal for more information.
### Fixed
+
- Rare NullPointerException when receiving messages
## [0.6.12] - 2020-11-22
+
### Added
+
- Show additional message content (view once, remote delete, mention, …) for received messages
- `--captcha` parameter for `register` command, required for some IP ranges
### Changed
+
- Profile keys are now stored separately from contact list
- Receipts from normal and unidentified messages now have the same format in json output
### Fixed
+
- Issue where some messages were sent with an old counter index
## [0.6.11] - 2020-10-14
+
- Fix issue with receiving message reactions
## [0.6.10] - 2020-09-11
+
- Fix issue when retrieving profiles
- Workaround issue with libzkgroup on platforms other than linux x86_64
## [0.6.9] - 2020-09-10
+
- Minor bug fixes and improvements
- dbus functionality now works on FreeBSD
- signal-cli now requires Java 11
**Warning: this version only works on Linux x86_64, will be fixed in 0.6.10**
## [0.6.8] - 2020-05-22
-- Switch to hypfvieh dbus-java, which doesn't require a native library anymore (drops requirement of libmatthew-unix-java)
+
+- Switch to hypfvieh dbus-java, which doesn't require a native library anymore (drops requirement of
+ libmatthew-unix-java)
- Bugfixes for messages with uuids
- Add `--expiration` parameter to `updateContact` command to set expiration timer
## [0.6.7] - 2020-04-03
+
- Send command now returns the timestamp of the sent message
- DBus daemon: Publish received sync message to SyncMessageReceived signal
- Fix issue with resolving e164/uuid addresses for sessions
- Fix pack key length for sticker upload
## [0.6.6] - 2020-03-29
+
- Added listContacts command
- Added block/unblock commands to block contacts and groups
- Added uploadStickerPack command to upload sticker packs (see man page for more details)
- Internal: support recipients with uuids
## [0.6.5] - 2019-11-11
+
Supports receiving messages sent with unidentified sender
## [0.6.4] - 2019-11-02
+
- Fix rounding error for attachment ids in json output
- Add additional info to json output
- Add commands to update profile name and avatar
- Add command to update contact names
## [0.6.3] - 2019-09-05
+
Bug fixes and small improvements
## [0.6.2] - 2018-12-16
+
- Fixes sending of group messages
## [0.6.1] - 2018-12-09
+
- Added getGroupIds dbus command
- Use "NativePRNG" pseudo random number generator, if available
- Switch default data path:
Existing data paths will continue to work (used as fallback)
## [0.6.0] - 2018-05-03
+
- Simple json output
- dbus signal for receiving messages
- Registration lock PIN
- Output quoted message
## [0.5.6] - 2017-06-16
+
* new listGroups command
* Support for attachments with file names
* Support for complete contacts sync
-* Support for contact verification sync
+* Support for contact verification sync
* DBus interface:
- * Get/Set group info
- * Get/Set contact info
+* Get/Set group info
+* Get/Set contact info
## [0.5.5] - 2017-02-18
+
- fix receiving messages on linked devices
- add unregister command
## [0.5.4] - 2017-02-17
+
- Fix linking of new devices
## [0.5.3] - 2017-01-29
-* New commandline paramter for receive: --ignore-attachments
+
+* New commandline parameter for receive: --ignore-attachments
* Updated dependencies
## [0.5.2] - 2016-12-16
+
- Add support for group info requests
- Improve closing of file streams
## [0.5.1] - 2016-11-18
+
- Support new safety numbers (https://whispersystems.org/blog/safety-number-updates/)
- Add a man page
- Support sending disappearing messages, if the recipient has activated it
## [0.5.0] - 2016-08-29
+
- Check if a number is registered on Signal, before adding it to a group
- Prevent sending to groups that the user has quit
- Commands to trust new identity keys (see README)
- Timestamps shown in ISO 8601 format
## [0.4.1] - 2016-07-18
+
- Fix issue with creating groups
- Lock config file to prevent parallel access by multiple instances of signal-cli
- Improve return codes, always return non-zero code, when sending failed
## [0.4.0] - 2016-06-19
+
- Linking to Signal-Desktop and Signal-Android is now possible (Provisioning)
- Added a contact store, mainly for syncing contacts with linked devices (editing not yet possible via cli)
- Avatars for groups and contacts are now stored (new folder "avatars" in the config path)
## [0.3.1] - 2016-04-03
+
- Fix running with Oracle JRE 8
- Fix registering
- Fix unicode warning when compiling with non utf8 locale
## [0.3.0] - 2016-04-02
+
- Renamed textsecure-cli to signal-cli, following the rename of libtextsecure-java to libsignal-service-java
- The experimental dbus interface was also renamed to org.asamk.Signal
- Upload new prekeys to the server, when there are less than 20 left, prekeys are needed to create new sessions
## [0.2.1] - 2016-02-10
+
- Improve dbus service
- New command line argument --config to specify config directory
## [0.2.0] - 2015-12-30
-Added an experimental dbus interface, for sending and receiving messages (The interface is unstable and may change with future releases).
+
+Added an experimental dbus interface, for sending and receiving messages (The interface is unstable and may change with
+future releases).
This release works with Java 7 and 8.
## [0.1.0] - 2015-11-28
+
Add support for creating/updating groups and sending to them
## [0.0.5] - 2015-11-21
+
- Add receive timeout commandline parameter
- Show message group info
## [0.0.3] - 2015-08-07
## [0.0.2] - 2015-07-08
+
First release
git.nmode.ca / signal-cli / blobdiff
