/////
vim:set ts=4 sw=4 tw=82 noet:
/////
+
:quotes.~:
= signal-cli (1)
== Name
-signal-cli - A commandline and dbus interface for the Signal messenger
+signal-cli - A commandline interface for the Signal messenger
== Synopsis
-*signal-cli* [--config CONFIG] [-h | -v | -u USERNAME | --dbus | --dbus-system] command [command-options]
+*signal-cli* [--config CONFIG] [-h | -v | -a ACCOUNT | --dbus | --dbus-system] command [command-options]
== Description
It supports registering, verifying, sending and receiving messages.
For registering you need a phone number where you can receive SMS or incoming calls.
signal-cli was primarily developed to be used on servers to notify admins of important events.
-For this use-case, it has a dbus interface, that can be used to send messages from any programming language that has dbus bindings.
+For this use-case, it has a dbus and a JSON-RPC interface, that can be used to send messages from other programs.
For some functionality the Signal protocol requires that all messages have been received from the server.
-The `receive` command should be regularly executed. In daemon mode messages are continuously received.
+The `receive` command should be regularly executed.
+In daemon mode messages are continuously received.
== Options
*-h*, *--help*::
Show help message and quit.
-*-v*, *--version*::
+*--version*::
Print the version and quit.
-*--verbose*::
+*-v*, *--verbose*::
Raise log level and include lib signal logs.
+*--log-file* LOG_FILE::
+Write log output to the given file.
+If `--verbose` is also given, the detailed logs will only be written to the log file.
+
+*--scrub-log*::
+Scrub possibly sensitive information from the log, like phone numbers and UUIDs.
+
*--config* CONFIG::
Set the path, where to store the config.
Make sure you have full read/write access to the given directory.
(Default: `$XDG_DATA_HOME/signal-cli` (`$HOME/.local/share/signal-cli`))
-*-u* USERNAME, *--username* USERNAME::
+*-a* ACCOUNT, *--account* ACCOUNT::
Specify your phone number, that will be your identifier.
The phone number must include the country calling code, i.e. the number must start with a "+" sign.
This flag must not be given for the `link` command.
It is optional for the `daemon` command.
-For all other commands it is only optional if there is exactly one local user in the
-config directory.
+For all other commands it is only optional if there is exactly one local user in the config directory.
+
+*--service-environment* ENVIRONMENT::
+Choose the server environment to use:
+
+- `live` (default)
+- `staging`
*--dbus*::
Make request via user dbus.
Make request via system dbus.
*-o* OUTPUT-MODE, *--output* OUTPUT-MODE::
-Specify if you want commands to output in either "plain-text" mode or in "json". Defaults to "plain-text"
+Specify if you want commands to output in either "plain-text" mode or in "json".
+Defaults to "plain-text"
*--trust-new-identities* TRUST-MODE::
Choose when to trust new identities:
-- `on-first-use` (default): Trust the first seen identity key from new users,
- changed keys must be verified manually
+- `on-first-use` (default): Trust the first seen identity key from new users, changed keys must be verified manually
- `always`: Trust any new identity key without verification
- `never`: Don't trust any unknown identity key, every key must be verified manually
+*--disable-send-log*::
+Disable message send log (for resending messages that recipient couldn't decrypt).
+
== Commands
=== register
Register a phone number with SMS or voice verification.
Use the verify command to complete the verification.
+If the account is just deactivated, the register command will just reactivate account, without requiring an SMS verification.
+By default the unregister command just deactivates the account, in which case it can be reactivated without sms verification if the local data is still available.
+If the account was deleted (with --delete-account) it cannot be reactivated.
+
*-v*, *--voice*::
The verification should be done over voice, not SMS.
*--captcha*::
The captcha token, required if registration failed with a captcha required error.
To get the token, go to https://signalcaptchas.org/registration/generate.html
-Check the developer tools for a redirect starting with signalcaptcha://
-Everything after signalcaptcha:// is the captcha token.
+For the staging environment, use: https://signalcaptchas.org/staging/registration/generate.html
+Check the developer tools for a redirect starting with signalcaptcha:// Everything after signalcaptcha:// is the captcha token.
=== verify
=== unregister
Disable push support for this device, i.e. this device won't receive any more messages.
-If this is the master device, other users can't send messages to this number anymore.
+If this is the primary device, other users can't send messages to this number anymore.
Use "updateAccount" to undo this.
-To remove a linked device, use "removeDevice" from the master device.
+To remove a linked device, use "removeDevice" from the primary device.
*--delete-account*::
-Delete account completely from server. Cannot be undone without loss. You will
-have to be readded to each group.
+Delete account completely from server.
+Cannot be undone without loss.
+You will have to be readded to each group.
CAUTION: Only delete your account if you won't use this number again!
+=== deleteLocalAccountData
+
+Delete all local data for this account.
+Data should only be deleted if the account is unregistered.
+
+CAUTION: This cannot be undone.
+
+*--ignore-registered*::
+Delete the account data even though the account is still registered on the Signal servers.
+
=== updateAccount
Update the account attributes on the signal server.
Can fix problems with receiving messages.
*-n* NAME, *--device-name* NAME::
-Set a new device name for the main or linked device
+Set a new device name for the primary or linked device
=== updateConfiguration
Update signal configs and sync them to linked devices.
-This command only works on the main devices.
+This command only works on the primary devices.
*--read-receipts* {true,false}::
Indicates if Signal should send read receipts.
=== link
Link to an existing device, instead of registering a new number.
-This shows a "sgnl://linkdevice/?uuid=..." URI. If you want to connect to another signal-cli instance, you can just use this URI.
+This shows a "sgnl://linkdevice?uuid=..." URI.
+If you want to connect to another signal-cli instance, you can just use this URI.
If you want to link to an Android/iOS device, create a QR code with the URI (e.g. with qrencode) and scan that in the Signal app.
*-n* NAME, *--name* NAME::
=== addDevice
Link another device to this device.
-Only works, if this is the master device.
+Only works, if this is the primary device.
*--uri* URI::
Specify the uri contained in the QR code shown by the new device.
-You will need the full URI such as "sgnl://linkdevice/?uuid=..." (formerly "tsdevice:/?uuid=...")
-Make sure to enclose it in quotation marks for shells.
+You will need the full URI such as "sgnl://linkdevice?uuid=..." (formerly "tsdevice:/?uuid=...") Make sure to enclose it in quotation marks for shells.
=== listDevices
=== removeDevice
Remove a linked device.
-Only works, if this is the master device.
+Only works, if this is the primary device.
*-d* DEVICE_ID, *--device-id* DEVICE_ID::
Specify the device you want to remove.
RECIPIENT::
Specify the recipients’ phone number.
+*--note-to-self*::
+Send the message to self without notification.
+
*-g* GROUP, *--group-id* GROUP::
Specify the recipient group ID in base64 encoding.
*-m* MESSAGE, *--message* MESSAGE::
-Specify the message, if missing, standard input is used.
+Specify the message.
+
+*--message-from-stdin*::
+Read the message from standard input.
*-a* [ATTACHMENT [ATTACHMENT ...]], *--attachment* [ATTACHMENT [ATTACHMENT ...]]::
Add one or more files as attachment.
+Can be either a file path or a data URI.
+Data URI encoded attachments must follow the RFC 2397.
+Additionally a file name can be added:
+e.g.: `data:<MIME-TYPE>;filename=<FILENAME>;base64,<BASE64 ENCODED DATA>`
-*--note-to-self*::
-Send the message to self without notification.
+*--sticker* STICKER::
+Send a sticker of a locally known sticker pack (syntax: stickerPackId:stickerId).
+Shouldn't be used together with `-m` as the official clients don't support this.
+e.g.: `--sticker 00abac3bc18d7f599bff2325dc306d43:2`
+
+*--mention*::
+Mention another group member (syntax: start:length:recipientNumber) In the apps the mention replaces part of the message text, which is specified by the start and length values.
+e.g.: `-m "Hi X!" --mention "3:1:+123456789"`
+
+*--quote-timestamp*::
+Specify the timestamp of a previous message with the recipient or group to add a quote to the new message.
+
+*--quote-author*::
+Specify the number of the author of the original message.
+
+*--quote-message*::
+Specify the message of the original message.
+
+*--quote-mention*::
+Specify the mentions of the original message (same format as `--mention`).
+
+*--preview-url*::
+Specify the url for the link preview.
+The same url must also appear in the message body, otherwise the preview won't be displayed by the apps.
+
+*--preview-title*::
+Specify the title for the link preview (mandatory).
+
+*--preview-description*::
+Specify the description for the link preview (optional).
+
+*--preview-image*::
+Specify the image file for the link preview (optional).
*-e*, *--end-session*::
Clear session state and send end session message.
+=== sendPaymentNotification
+
+Send a payment notification.
+
+RECIPIENT::
+Specify the recipient’s phone number.
+
+*--receipt* RECEIPT::
+The base64 encoded receipt blob.
+
+*--note* NOTE::
+Specify a note for the payment notification.
+
=== sendReaction
Send reaction to a previously received or sent message.
*-r*, *--remove*::
Remove a reaction.
+*--story*::
+React to a story instead of a normal message
+
=== sendReceipt
Send a read or viewed receipt to a previously received message.
*-t* TIMEOUT, *--timeout* TIMEOUT::
Number of seconds to wait for new messages (negative values disable timeout).
Default is 5 seconds.
+
*--ignore-attachments*::
Don’t download attachments of received messages.
+*--ignore-stories*::
+Don’t receive story messages from the server.
+
+
+*--send-read-receipts*::
+Send read receipts for all incoming data messages (in addition to the default delivery receipts)
+
=== joinGroup
Join a group via an invitation link.
*--remove-admin* [MEMBER [MEMBER ...]]::
Specify one or more members to remove group admin privileges
+*--ban* [MEMBER [MEMBER ...]]::
+Specify one or more members to ban from joining the group.
+Banned members cannot join or request to join via a group link.
+
+*--unban* [MEMBER [MEMBER ...]]::
+Specify one or more members to remove from the ban list
+
*--reset-link*::
Reset group link and create new link password
*-d*, *--detailed*::
Include the list of members of each group and the group invite link.
+*-g*, *--group-id*::
+Filter the group list by one or more group IDs.
+
=== listContacts
-Show a list of known contacts with names.
+Show a list of known contacts with names and profiles.
+When a specific recipient is given, its profile will be refreshed.
+
+RECIPIENT::
+Specify the recipients’ phone number.
+
+*-a*, *--all-recipients*::
+Include all known recipients, not only contacts.
+
+*--blocked*::
+Specify if only blocked or unblocked contacts should be shown (default: all contacts)
+
+*--name*::
+Find contacts with the given contact or profile name.
=== listIdentities
*-v* VERIFIED_SAFETY_NUMBER, *--verified-safety-number* VERIFIED_SAFETY_NUMBER::
Specify the safety number of the key, only use this option if you have verified the safety number.
-Can be either the plain text numbers shown in the app or the bytes from the QR-code,
-encoded as base64.
+Can be either the plain text numbers shown in the app or the bytes from the QR-code, encoded as base64.
=== updateProfile
Update the profile information shown to message recipients.
The profile is stored encrypted on the Signal servers.
-The decryption key is sent with every outgoing messages to contacts and included
-in every group.
+The decryption key is sent with every outgoing messages to contacts and included in every group.
*--given-name* NAME, *--name* NAME::
New (given) name.
*--remove-avatar*::
Remove the avatar
+*--mobile-coin-address*::
+New MobileCoin address (Base64 encoded public address)
+
=== updateContact
Update the info associated to a number on our contact list.
NUMBER::
Specify the contact phone number.
-*-n*, *--name*::
-Specify the new name for this contact.
+*--given-name* NAME, *--name* NAME::
+New (given) name.
+
+*--family-name* FAMILY_NAME::
+New family name.
*-e*, *--expiration* EXPIRATION_SECONDS::
Set expiration time of messages (seconds).
To disable expiration set expiration time to 0.
+=== removeContact
+
+Remove the info of a given contact
+
+NUMBER::
+Specify the contact phone number.
+
+*--forget*::
+Delete all data associated with this contact, including identity keys and sessions.
+
=== block
Block the given contacts or groups (no messages will be received).
=== sendContacts
Send a synchronization message with the local contacts list to all linked devices.
-This command should only be used if this is the master device.
+This command should only be used if this is the primary device.
=== sendSyncRequest
-Send a synchronization request message to the master device (for group, contacts, ...).
-The master device will respond with synchronization messages with full contact and
-group lists.
+Send a synchronization request message to the primary device (for group, contacts, ...).
+The primary device will respond with synchronization messages with full contact and group lists.
=== uploadStickerPack
Upload a new sticker pack, consisting of a manifest file and the sticker images.
Images must conform to the following specification: (see https://support.signal.org/hc/en-us/articles/360031836512-Stickers#sticker_reqs )
+
- Static stickers in PNG or WebP format
- Animated stickers in APNG format,
- Maximum file size for a sticker file is 300KiB
=== daemon
-signal-cli can run in daemon mode and provides an experimental dbus interface.
-If no `-u` username is given, all local users will be exported as separate dbus
-objects under the same bus name.
+signal-cli can run in daemon mode and provides an experimental dbus or JSON-RPC interface.
+If no `-a` account is given, all local accounts will be exported as separate dbus objects under the same bus name.
+
+*--dbus*::
+Export DBus interface on user bus.
+See signal-cli-dbus (5) for info on the dbus interface.
+
+*--dbus-system*::
+Export DBus interface on system bus.
+See signal-cli-dbus (5) for info on the dbus interface.
+
+*--socket [SOCKET]*::
+Export a JSON-RPC interface on a UNIX socket (default $XDG_RUNTIME_DIR/signal-cli/socket).
+See signal-cli-jsonrpc (5) for info on the JSON-RPC interface.
+
+*--tcp [HOST:PORT]*::
+Export a JSON-RPC interface on a TCP socket (default localhost:7583).
+See signal-cli-jsonrpc (5) for info on the JSON-RPC interface.
-*--system*::
-Use DBus system bus instead of user bus.
*--ignore-attachments*::
Don’t download attachments of received messages.
+*--ignore-stories*::
+Don’t receive story messages from the server.
+
+*--send-read-receipts*::
+Send read receipts for all incoming data messages (in addition to the default delivery receipts)
+
+*--no-receive-stdout*::
+Don’t print received messages to stdout.
+
+*--receive-mode*::
+Specify when to start receiving messages (on-start, on-connection, manual)
+
== Examples
Register a number (with SMS verification)::
-signal-cli -u USERNAME register
+signal-cli -a ACCOUNT register
Verify the number using the code received via SMS or voice::
-signal-cli -u USERNAME verify CODE
+signal-cli -a ACCOUNT verify CODE
Send a message to one or more recipients::
-signal-cli -u USERNAME send -m "This is a message" [RECIPIENT [RECIPIENT ...]] [-a [ATTACHMENT [ATTACHMENT ...]]]
+signal-cli -a ACCOUNT send -m "This is a message" [RECIPIENT [RECIPIENT ...]] [-a [ATTACHMENT [ATTACHMENT ...]]]
Pipe the message content from another process::
-uname -a | signal-cli -u USERNAME send [RECIPIENT [RECIPIENT ...]]
+uname -a | signal-cli -a ACCOUNT send --message-from-stdin [RECIPIENT [RECIPIENT ...]]
Create a group::
-signal-cli -u USERNAME updateGroup -n "Group name" -m [MEMBER [MEMBER ...]]
+signal-cli -a ACCOUNT updateGroup -n "Group name" -m [MEMBER [MEMBER ...]]
Add member to a group::
-signal-cli -u USERNAME updateGroup -g GROUP_ID -m "NEW_MEMBER"
+signal-cli -a ACCOUNT updateGroup -g GROUP_ID -m "NEW_MEMBER"
Accept a group invitation::
-signal-cli -u USERNAME updateGroup -g GROUP_ID
+signal-cli -a ACCOUNT updateGroup -g GROUP_ID
Leave a group::
-signal-cli -u USERNAME quitGroup -g GROUP_ID
+signal-cli -a ACCOUNT quitGroup -g GROUP_ID
Send a message to a group::
-signal-cli -u USERNAME send -m "This is a message" -g GROUP_ID
+signal-cli -a ACCOUNT send -m "This is a message" -g GROUP_ID
Trust new key, after having verified it::
-signal-cli -u USERNAME trust -v SAFETY_NUMBER NUMBER
+signal-cli -a ACCOUNT trust -v SAFETY_NUMBER NUMBER
Trust new key, without having verified it. Only use this if you don't care about security::
-signal-cli -u USERNAME trust -a NUMBER
+signal-cli -a ACCOUNT trust -a NUMBER
== Exit codes
+
* *1*: Error is probably caused and fixable by the user
* *2*: Some unexpected error
* *3*: Server or IO error
git.nmode.ca / signal-cli / blobdiff
