Add --mobilecoin-address as alias to updateProfile

[signal-cli] / man / signal-cli.1.adoc

diff --git a/man/signal-cli.1.adoc b/man/signal-cli.1.adoc
index 690e33b7e103a2a30709db249f986655afecef4d..32321095775d53754b0421d9ef6a8c44668edec8 100644 (file)
--- a/man/signal-cli.1.adoc
+++ b/man/signal-cli.1.adoc
@@ -1,17 +1,19 @@
 /////
 vim:set ts=4 sw=4 tw=82 noet:
 /////
 /////
 vim:set ts=4 sw=4 tw=82 noet:
 /////

+

 :quotes.~:
 
 = signal-cli (1)
 :quotes.~:
 
 = signal-cli (1)

+:doctype: manpage

 
 == Name
 
 
 == Name
 

-signal-cli - A commandline and dbus interface for the Signal messenger
+signal-cli - A commandline interface for the Signal messenger

 
 == Synopsis
 
 
 == Synopsis
 

-*signal-cli* [--config CONFIG] [-h | -v | -u USERNAME | --dbus | --dbus-system] command [command-options]
+*signal-cli* [--config CONFIG] [-h | -v | -a ACCOUNT | --dbus | --dbus-system] command [command-options]

 
 == Description
 
 
 == Description
 


@@ -19,35 +21,60 @@ signal-cli is a commandline interface for libsignal-service-java.
 It supports registering, verifying, sending and receiving messages.
 For registering you need a phone number where you can receive SMS or incoming calls.
 signal-cli was primarily developed to be used on servers to notify admins of important events.
 It supports registering, verifying, sending and receiving messages.
 For registering you need a phone number where you can receive SMS or incoming calls.
 signal-cli was primarily developed to be used on servers to notify admins of important events.

-For this use-case, it has a dbus interface, that can be used to send messages from any programming language that has dbus bindings.
+For this use-case, it has a dbus and a JSON-RPC interface, that can be used to send messages from other programs.
+
+Originally the Signal protocol only allowed sending messages to other phone numbers.
+Now with the introduction of phone number privacy, the phone number of a recipient is not always known.
+Only the recipient's ServiceId, ACI/PNI (a special UUID) is known.
+
+In all places where a RECIPIENT argument is expected in signal-cli's interface, one of the following can be used:
+
+- The phone number
+- The ACI, just a UUID
+- The PNI, just a UUID, with "PNI:" prefix
+- The username, with "u:" prefix, e.g. "u:test.000"

 
 For some functionality the Signal protocol requires that all messages have been received from the server.
 
 For some functionality the Signal protocol requires that all messages have been received from the server.

-The `receive` command should be regularly executed. In daemon mode messages are continuously received.
+The `receive` command should be regularly executed.
+In daemon mode messages are by default continuously received.

 
 == Options
 
 *-h*, *--help*::
 Show help message and quit.
 
 
 == Options
 
 *-h*, *--help*::
 Show help message and quit.
 

-*-v*, *--version*::
+*--version*::

 Print the version and quit.
 
 Print the version and quit.
 

-*--verbose*::
+*-v*, *--verbose*::

 Raise log level and include lib signal logs.
 
 Raise log level and include lib signal logs.
 

+*--log-file* LOG_FILE::
+Write log output to the given file.
+If `--verbose` is also given, the detailed logs will only be written to the log file.
+
+*--scrub-log*::
+Scrub possibly sensitive information from the log, like phone numbers and UUIDs.
+Doesn't work reliably on dbus logs with very verbose logging (`-vvv`)
+

 *--config* CONFIG::
 Set the path, where to store the config.
 Make sure you have full read/write access to the given directory.
 (Default: `$XDG_DATA_HOME/signal-cli` (`$HOME/.local/share/signal-cli`))
 
 *--config* CONFIG::
 Set the path, where to store the config.
 Make sure you have full read/write access to the given directory.
 (Default: `$XDG_DATA_HOME/signal-cli` (`$HOME/.local/share/signal-cli`))
 

-*-u* USERNAME, *--username* USERNAME::
+*-a* ACCOUNT, *--account* ACCOUNT::

 Specify your phone number, that will be your identifier.
 The phone number must include the country calling code, i.e. the number must start with a "+" sign.
 
 This flag must not be given for the `link` command.
 It is optional for the `daemon` command.
 Specify your phone number, that will be your identifier.
 The phone number must include the country calling code, i.e. the number must start with a "+" sign.
 
 This flag must not be given for the `link` command.
 It is optional for the `daemon` command.

-For all other commands it is only optional if there is exactly one local user in the
-config directory.
+For all other commands it is only optional if there is exactly one local user in the config directory.
+
+*--service-environment* ENVIRONMENT::
+Choose the server environment to use:
+
+- `live` (default)
+- `staging`

 
 *--dbus*::
 Make request via user dbus.
 
 *--dbus*::
 Make request via user dbus.


@@ -55,8 +82,21 @@ Make request via user dbus.
 *--dbus-system*::
 Make request via system dbus.
 
 *--dbus-system*::
 Make request via system dbus.
 

+*--bus-name*::
+Connect to another D-Bus bus name than the default.
+

 *-o* OUTPUT-MODE, *--output* OUTPUT-MODE::
 *-o* OUTPUT-MODE, *--output* OUTPUT-MODE::

-Specify if you want commands to output in either "plain-text" mode or in "json". Defaults to "plain-text"
+Specify if you want commands to output in either "plain-text" mode or in "json".
+Defaults to "plain-text"
+
+*--trust-new-identities* TRUST-MODE::
+Choose when to trust new identities:
+- `on-first-use` (default): Trust the first seen identity key from new users, changed keys must be verified manually
+- `always`: Trust any new identity key without verification
+- `never`: Don't trust any unknown identity key, every key must be verified manually
+
+*--disable-send-log*::
+Disable message send log (for resending messages that recipient couldn't decrypt).

 
 == Commands
 
 
 == Commands
 


@@ -65,14 +105,22 @@ Specify if you want commands to output in either "plain-text" mode or in "json".
 Register a phone number with SMS or voice verification.
 Use the verify command to complete the verification.
 
 Register a phone number with SMS or voice verification.
 Use the verify command to complete the verification.
 

+If the account is just deactivated, the register command will just reactivate account, without requiring an SMS verification.
+By default the unregister command just deactivates the account, in which case it can be reactivated without sms verification if the local data is still available.
+If the account was deleted (with --delete-account) it cannot be reactivated.
+

 *-v*, *--voice*::
 The verification should be done over voice, not SMS.
 *-v*, *--voice*::
 The verification should be done over voice, not SMS.

+Voice verification only works if an SMS verification has been attempted before.

 
 

-*--captcha*::
+*--captcha* CAPTCHA::

 The captcha token, required if registration failed with a captcha required error.
 To get the token, go to https://signalcaptchas.org/registration/generate.html
 The captcha token, required if registration failed with a captcha required error.
 To get the token, go to https://signalcaptchas.org/registration/generate.html

-Check the developer tools for a redirect starting with signalcaptcha://
-Everything after signalcaptcha:// is the captcha token.
+For the staging environment, use: https://signalcaptchas.org/staging/registration/generate.html
+After solving the captcha, right-click on the "Open Signal" link and copy the link.
+
+*--reregister*::
+Register even if account is already registered.

 
 === verify
 
 
 === verify
 


@@ -88,24 +136,104 @@ Only required if a PIN was set.
 === unregister
 
 Disable push support for this device, i.e. this device won't receive any more messages.
 === unregister
 
 Disable push support for this device, i.e. this device won't receive any more messages.

-If this is the master device, other users can't send messages to this number anymore.
+If this is the primary device, other users can't send messages to this number anymore.

 Use "updateAccount" to undo this.
 Use "updateAccount" to undo this.

-To remove a linked device, use "removeDevice" from the master device.
+To remove a linked device, use "removeDevice" from the primary device.

 
 *--delete-account*::
 
 *--delete-account*::

-Delete account completely from server. Cannot be undone without loss. You will
-have to be readded to each group.
+Delete account completely from server.
+Cannot be undone without loss.
+You will have to be readded to each group.

 
 CAUTION: Only delete your account if you won't use this number again!
 
 
 CAUTION: Only delete your account if you won't use this number again!
 

+=== deleteLocalAccountData
+
+Delete all local data for this account.
+Data should only be deleted if the account is unregistered.
+
+CAUTION: This cannot be undone.
+
+*--ignore-registered*::
+Delete the account data even though the account is still registered on the Signal servers.
+

 === updateAccount
 
 Update the account attributes on the signal server.
 Can fix problems with receiving messages.
 
 === updateAccount
 
 Update the account attributes on the signal server.
 Can fix problems with receiving messages.
 

+*-n* NAME, *--device-name* NAME::
+Set a new device name for the primary or linked device
+
+*-u* NAME *--username* NAME::
+Specify a username that can then be used to contact this account.
+This can either be just the nickname (e.g. test) or the complete username with discriminator (e.g. test.000).
+Returns the new username with discriminator and the username link.
+
+*--delete-username*::
+Delete the username associated with this account.
+
+*--unrestricted-unidentified-sender* {true,false}::
+Enable if anyone should be able to send you unidentified sender messages.
+
+*--discoverable-by-number* {true,false}::
+Enable/disable if the account should be discoverable by phone number
+
+*--number-sharing* {true,false}::
+Indicates if Signal should share its phone number when sending a message.
+
+=== startChangeNumber
+
+Change an account to a new phone number with SMS or voice verification.
+Use the finishChangeNumber command to complete the verification.
+
+RECIPIENT::
+The new phone number.
+
+*-v*, *--voice*::
+The verification should be done over voice, not SMS.
+Voice verification only works if an SMS verification has been attempted before.
+
+*--captcha*::
+The captcha token, required if registration failed with a captcha required error.
+To get the token, go to https://signalcaptchas.org/registration/generate.html
+For the staging environment, use: https://signalcaptchas.org/staging/registration/generate.html
+After solving the captcha, right-click on the "Open Signal" link and copy the link.
+
+=== finishChangeNumber
+
+Verify the number using the code received via SMS or voice.
+
+RECIPIENT::
+The new phone number.
+
+*-v*, *--verification-code*::
+The verification code.
+
+*-p* PIN, *--pin* PIN::
+The registration lock PIN, that was set by the user.
+Only required if a PIN was set.
+
+=== updateConfiguration
+
+Update signal configs and sync them to linked devices.
+This command only works on the primary devices.
+
+*--read-receipts* {true,false}::
+Indicates if Signal should send read receipts.
+
+*--unidentified-delivery-indicators* {true,false}::
+Indicates if Signal should show unidentified delivery indicators.
+
+*--typing-indicators* {true,false}::
+Indicates if Signal should send/show typing indicators.
+
+*--link-previews* {true,false}::
+Indicates if Signal should generate link previews.
+

 === setPin
 
 === setPin
 

-Set a registration lock pin, to prevent others from registering this number.
+Set a registration lock pin, to prevent others from registering your account's phone number.

 
 REGISTRATION_LOCK_PIN::
 The registration lock PIN, that will be required for new registrations (resets after 7 days of inactivity)
 
 REGISTRATION_LOCK_PIN::
 The registration lock PIN, that will be required for new registrations (resets after 7 days of inactivity)


@@ -117,7 +245,8 @@ Remove the registration lock pin.
 === link
 
 Link to an existing device, instead of registering a new number.
 === link
 
 Link to an existing device, instead of registering a new number.

-This shows a "tsdevice:/…" URI. If you want to connect to another signal-cli instance, you can just use this URI.
+This shows a "sgnl://linkdevice?uuid=..." URI.
+If you want to connect to another signal-cli instance, you can just use this URI.

 If you want to link to an Android/iOS device, create a QR code with the URI (e.g. with qrencode) and scan that in the Signal app.
 
 *-n* NAME, *--name* NAME::
 If you want to link to an Android/iOS device, create a QR code with the URI (e.g. with qrencode) and scan that in the Signal app.
 
 *-n* NAME, *--name* NAME::


@@ -127,11 +256,11 @@ By default "cli" will be used.
 === addDevice
 
 Link another device to this device.
 === addDevice
 
 Link another device to this device.

-Only works, if this is the master device.
+Only works, if this is the primary device.

 
 *--uri* URI::
 Specify the uri contained in the QR code shown by the new device.
 
 *--uri* URI::
 Specify the uri contained in the QR code shown by the new device.

-You will need the full uri enclosed in quotation marks, such as "tsdevice:/?uuid=....."
+You will need the full URI such as "sgnl://linkdevice?uuid=...&pub_key=..." (formerly "tsdevice:/?uuid=...") Make sure to enclose it in quotation marks for shells.

 
 === listDevices
 
 
 === listDevices
 


@@ -140,7 +269,7 @@ Show a list of linked devices.
 === removeDevice
 
 Remove a linked device.
 === removeDevice
 
 Remove a linked device.

-Only works, if this is the master device.
+Only works, if this is the primary device.

 
 *-d* DEVICE_ID, *--device-id* DEVICE_ID::
 Specify the device you want to remove.
 
 *-d* DEVICE_ID, *--device-id* DEVICE_ID::
 Specify the device you want to remove.


@@ -148,50 +277,153 @@ Use listDevices to see the deviceIds.
 
 === getUserStatus
 
 
 === getUserStatus
 

-Uses a list of phone numbers to determine the statuses of those users.
+Uses a list of phone numbers or usernames to determine the statuses of those users.

 Shows if they are registered on the Signal Servers or not.
 In json mode this is outputted as a list of objects.
 
 Shows if they are registered on the Signal Servers or not.
 In json mode this is outputted as a list of objects.
 

-[NUMBER [NUMBER ...]]::
+[RECIPIENT [RECIPIENT ...]]::

 One or more numbers to check.
 
 One or more numbers to check.
 

+[--username [USERNAME ...]]::
+One or more usernames to check.
+

 === send
 
 Send a message to another user or group.
 
 RECIPIENT::
 === send
 
 Send a message to another user or group.
 
 RECIPIENT::

-Specify the recipients’ phone number.
+Specify the recipients.
+
+*--note-to-self*::
+Send the message to self without notification.

 
 

-*-g* GROUP, *--group* GROUP::
+*-g* GROUP, *--group-id* GROUP::

 Specify the recipient group ID in base64 encoding.
 
 Specify the recipient group ID in base64 encoding.
 

+*-u* USERNAME, *--username* USERNAME::
+Specify the recipient username or username link.
+

 *-m* MESSAGE, *--message* MESSAGE::
 *-m* MESSAGE, *--message* MESSAGE::

-Specify the message, if missing, standard input is used.
+Specify the message.
+
+*--message-from-stdin*::
+Read the message from standard input.

 
 *-a* [ATTACHMENT [ATTACHMENT ...]], *--attachment* [ATTACHMENT [ATTACHMENT ...]]::
 Add one or more files as attachment.
 
 *-a* [ATTACHMENT [ATTACHMENT ...]], *--attachment* [ATTACHMENT [ATTACHMENT ...]]::
 Add one or more files as attachment.

+Can be either a file path or a data URI.
+Data URI encoded attachments must follow the RFC 2397.
+Additionally a file name can be added:
+e.g.: `data:<MIME-TYPE>;filename=<FILENAME>;base64,<BASE64 ENCODED DATA>`

 
 

-*--note-to-self*::
-Send the message to self without notification.
+*--sticker* STICKER::
+Send a sticker of a locally known sticker pack (syntax: stickerPackId:stickerId).
+Shouldn't be used together with `-m` as the official clients don't support this.
+e.g.: `--sticker 00abac3bc18d7f599bff2325dc306d43:2`
+
+*--mention*::
+Mention another group member (syntax: start:length:recipientNumber) In the apps the mention replaces part of the message text, which is specified by the start and length values.
+The units of start and length should be UTF-16 code units, NOT Unicode code points.
+For more information, see https://github.com/AsamK/signal-cli/wiki/FAQ#string-indexing-units
+e.g.: `-m "Hi X!" --mention "3:1:+123456789"`
+
+*--text-style*::
+Style parts of the message text (syntax: start:length:STYLE).
+Like `--mention`, the units are UTF-16 code units.
+Where STYLE is one of: BOLD, ITALIC, SPOILER, STRIKETHROUGH, MONOSPACE
+
+e.g.: `-m "Something BIG!" --text-style "10:3:BOLD"` or for a mixed text style `-m "Something BIG!" --text-style "0:9:ITALIC" "10:3:BOLD"`
+
+*--quote-timestamp*::
+Specify the timestamp of a previous message with the recipient or group to add a quote to the new message.
+
+*--quote-author*::
+Specify the author of the original message.
+
+*--quote-message*::
+Specify the message of the original message.
+
+*--quote-mention*::
+Specify the mentions of the original message (same format as `--mention`).
+
+*--quote-text-style*::
+Style parts of the original message text (same format as `--text-style`).
+
+*--quote-attachment*::
+Specify the attachments of the original message (syntax: contentType[:filename[:previewFile]]), e.g. 'audio/aac' or 'image/png:test.png:/tmp/preview.jpg'.
+
+*--preview-url*::
+Specify the url for the link preview.
+The same url must also appear in the message body, otherwise the preview won't be displayed by the apps.
+
+*--preview-title*::
+Specify the title for the link preview (mandatory).
+
+*--preview-description*::
+Specify the description for the link preview (optional).
+
+*--preview-image*::
+Specify the image file for the link preview (optional).
+
+*--story-timestamp*::
+Specify the timestamp of a story to reply to.
+
+*--story-author*::
+Specify the author of the story.

 
 *-e*, *--end-session*::
 Clear session state and send end session message.
 
 
 *-e*, *--end-session*::
 Clear session state and send end session message.
 

+*--edit-timestamp*::
+Specify the timestamp of a previous message with the recipient or group to send an edited message.
+
+=== sendMessageRequestResponse
+
+Send response to a message request to linked devices.
+
+RECIPIENT::
+Specify the recipients.
+
+*-g* GROUP, *--group-id* GROUP::
+Specify the recipient group ID in base64 encoding.
+
+*-u* USERNAME, *--username* USERNAME::
+Specify the recipient username or username link.
+
+*--type* TYPE::
+Type of message request response (accept, delete)
+
+=== sendPaymentNotification
+
+Send a payment notification.
+
+RECIPIENT::
+Specify the recipient.
+
+*--receipt* RECEIPT::
+The base64 encoded receipt blob.
+
+*--note* NOTE::
+Specify a note for the payment notification.
+

 === sendReaction
 
 Send reaction to a previously received or sent message.
 
 RECIPIENT::
 === sendReaction
 
 Send reaction to a previously received or sent message.
 
 RECIPIENT::

-Specify the recipients’ phone number.
+Specify the recipients.

 
 

-*-g* GROUP, *--group* GROUP::
+*-g* GROUP, *--group-id* GROUP::

 Specify the recipient group ID in base64 encoding.
 
 Specify the recipient group ID in base64 encoding.
 

+*-u* USERNAME, *--username* USERNAME::
+Specify the recipient username or username link.
+

 *-e* EMOJI, *--emoji* EMOJI::
 Specify the emoji, should be a single unicode grapheme cluster.
 
 *-e* EMOJI, *--emoji* EMOJI::
 Specify the emoji, should be a single unicode grapheme cluster.
 

-*-a* NUMBER, *--target-author* NUMBER::
-Specify the number of the author of the message to which to react.
+*-a* RECIPIENT, *--target-author* RECIPIENT::
+Specify the author of the message to which to react.

 
 *-t* TIMESTAMP, *--target-timestamp* TIMESTAMP::
 Specify the timestamp of the message to which to react.
 
 *-t* TIMESTAMP, *--target-timestamp* TIMESTAMP::
 Specify the timestamp of the message to which to react.


@@ -199,15 +431,31 @@ Specify the timestamp of the message to which to react.
 *-r*, *--remove*::
 Remove a reaction.
 
 *-r*, *--remove*::
 Remove a reaction.
 

+*--story*::
+React to a story instead of a normal message
+
+=== sendReceipt
+
+Send a read or viewed receipt to a previously received message.
+
+RECIPIENT::
+Specify the sender.
+
+*-t* TIMESTAMP, *--target-timestamp* TIMESTAMP::
+Specify the timestamp of the message to which to react.
+
+*--type* TYPE::
+Specify the receipt type, either `read` (the default) or `viewed`.
+

 === sendTyping
 
 Send typing message to trigger a typing indicator for the recipient.
 Indicator will be shown for 15seconds unless a typing STOP message is sent first.
 
 RECIPIENT::
 === sendTyping
 
 Send typing message to trigger a typing indicator for the recipient.
 Indicator will be shown for 15seconds unless a typing STOP message is sent first.
 
 RECIPIENT::

-Specify the recipients’ phone number.
+Specify the recipients.

 
 

-*-g* GROUP, *--group* GROUP::
+*-g* GROUP, *--group-id* GROUP::

 Specify the recipient group ID in base64 encoding.
 
 *-s*, *--stop*::
 Specify the recipient group ID in base64 encoding.
 
 *-s*, *--stop*::


@@ -218,11 +466,14 @@ Send a typing STOP message.
 Remotely delete a previously sent message.
 
 RECIPIENT::
 Remotely delete a previously sent message.
 
 RECIPIENT::

-Specify the recipients’ phone number.
+Specify the recipients.

 
 

-*-g* GROUP, *--group* GROUP::
+*-g* GROUP, *--group-id* GROUP::

 Specify the recipient group ID in base64 encoding.
 
 Specify the recipient group ID in base64 encoding.
 

+*-u* USERNAME, *--username* USERNAME::
+Specify the recipient username or username link.
+

 *-t* TIMESTAMP, *--target-timestamp* TIMESTAMP::
 Specify the timestamp of the message to delete.
 
 *-t* TIMESTAMP, *--target-timestamp* TIMESTAMP::
 Specify the timestamp of the message to delete.
 


@@ -235,9 +486,20 @@ In json mode this is outputted as one json object per line.
 *-t* TIMEOUT, *--timeout* TIMEOUT::
 Number of seconds to wait for new messages (negative values disable timeout).
 Default is 5 seconds.
 *-t* TIMEOUT, *--timeout* TIMEOUT::
 Number of seconds to wait for new messages (negative values disable timeout).
 Default is 5 seconds.

+
+*--max-messages*::
+Maximum number of messages to receive, before returning.
+

 *--ignore-attachments*::
 Don’t download attachments of received messages.
 
 *--ignore-attachments*::
 Don’t download attachments of received messages.
 

+*--ignore-stories*::
+Don’t receive story messages from the server.
+
+
+*--send-read-receipts*::
+Send read receipts for all incoming data messages (in addition to the default delivery receipts)
+

 === joinGroup
 
 Join a group via an invitation link.
 === joinGroup
 
 Join a group via an invitation link.


@@ -250,7 +512,7 @@ The invitation link URI (starts with `https://signal.group/#`)
 Create or update a group.
 If the user is a pending member, this command will accept the group invitation.
 
 Create or update a group.
 If the user is a pending member, this command will accept the group invitation.
 

-*-g* GROUP, *--group* GROUP::
+*-g* GROUP, *--group-id* GROUP::

 Specify the recipient group ID in base64 encoding.
 If not specified, a new group with a new random ID is generated.
 
 Specify the recipient group ID in base64 encoding.
 If not specified, a new group with a new random ID is generated.
 


@@ -275,6 +537,13 @@ Specify one or more members to make a group admin
 *--remove-admin* [MEMBER [MEMBER ...]]::
 Specify one or more members to remove group admin privileges
 
 *--remove-admin* [MEMBER [MEMBER ...]]::
 Specify one or more members to remove group admin privileges
 

+*--ban* [MEMBER [MEMBER ...]]::
+Specify one or more members to ban from joining the group.
+Banned members cannot join or request to join via a group link.
+
+*--unban* [MEMBER [MEMBER ...]]::
+Specify one or more members to remove from the ban list
+

 *--reset-link*::
 Reset group link and create new link password
 
 *--reset-link*::
 Reset group link and create new link password
 


@@ -287,6 +556,10 @@ Set permission to add new group members: `every-member`, `only-admins`
 *--set-permission-edit-details* PERMISSION::
 Set permission to edit group details: `every-member`, `only-admins`
 
 *--set-permission-edit-details* PERMISSION::
 Set permission to edit group details: `every-member`, `only-admins`
 

+*--set-permission-send-messages* PERMISSION::
+Set permission to send messages in group: `every-member`, `only-admins`
+Groups where only admins can send messages are also called announcement groups
+

 *-e* EXPIRATION_SECONDS, *--expiration* EXPIRATION_SECONDS::
 Set expiration time of messages (seconds).
 To disable expiration set expiration time to 0.
 *-e* EXPIRATION_SECONDS, *--expiration* EXPIRATION_SECONDS::
 Set expiration time of messages (seconds).
 To disable expiration set expiration time to 0.


@@ -296,7 +569,7 @@ To disable expiration set expiration time to 0.
 Send a quit group message to all group members and remove self from member list.
 If the user is a pending member, this command will decline the group invitation.
 
 Send a quit group message to all group members and remove self from member list.
 If the user is a pending member, this command will decline the group invitation.
 

-*-g* GROUP, *--group* GROUP::
+*-g* GROUP, *--group-id* GROUP::

 Specify the recipient group ID in base64 encoding.
 
 *--delete*::
 Specify the recipient group ID in base64 encoding.
 
 *--delete*::


@@ -310,38 +583,61 @@ In json mode this is outputted as an list of objects and is always in detailed m
 *-d*, *--detailed*::
 Include the list of members of each group and the group invite link.
 
 *-d*, *--detailed*::
 Include the list of members of each group and the group invite link.
 

+*-g*, *--group-id*::
+Filter the group list by one or more group IDs.
+

 === listContacts
 
 === listContacts
 

-Show a list of known contacts with names.
+Show a list of known contacts with names and profiles.
+When a specific recipient is given, its profile will be refreshed.
+
+RECIPIENT::
+Specify the recipients.
+
+*-a*, *--all-recipients*::
+Include all known recipients, not only contacts.
+
+*--blocked*::
+Specify if only blocked or unblocked contacts should be shown (default: all contacts)
+
+*--name*::
+Find contacts with the given contact or profile name.
+
+*--detailed*::
+List the contacts with more details.
+If output=json, then this is always set
+
+*--internal*::
+Include internal information that's normally not user visible

 
 === listIdentities
 
 List all known identity keys and their trust status, fingerprint and safety number.
 
 
 === listIdentities
 
 List all known identity keys and their trust status, fingerprint and safety number.
 

-*-n* NUMBER, *--number* NUMBER::
-Only show identity keys for the given phone number.
+*-n* RECIPIENT, *--number* RECIPIENT::
+Only show identity keys for the given recipient.

 
 === trust
 
 
 === trust
 

-Set the trust level of a given number.
-The first time a key for a number is seen, it is trusted by default (TOFU).
+Set the trust level of a given recipient.
+The first time a key for a recipient is seen, it is trusted by default (TOFU).

 If the key changes, the new key must be trusted manually.
 
 If the key changes, the new key must be trusted manually.
 

-number::
-Specify the phone number, for which to set the trust.
+RECIPIENT::
+Specify the recipient, for which to set the trust.

 
 *-a*, *--trust-all-known-keys*::
 Trust all known keys of this user, only use this for testing.
 
 *-v* VERIFIED_SAFETY_NUMBER, *--verified-safety-number* VERIFIED_SAFETY_NUMBER::
 Specify the safety number of the key, only use this option if you have verified the safety number.
 
 *-a*, *--trust-all-known-keys*::
 Trust all known keys of this user, only use this for testing.
 
 *-v* VERIFIED_SAFETY_NUMBER, *--verified-safety-number* VERIFIED_SAFETY_NUMBER::
 Specify the safety number of the key, only use this option if you have verified the safety number.

+Can be either the plain text numbers shown in the app or the bytes from the QR-code, encoded as base64.

 
 === updateProfile
 
 Update the profile information shown to message recipients.
 The profile is stored encrypted on the Signal servers.
 
 === updateProfile
 
 Update the profile information shown to message recipients.
 The profile is stored encrypted on the Signal servers.

-The decryption key is sent with every outgoing messages to contacts and included
-in every group.
+The decryption key is sent with every outgoing messages to contacts and included in every group.

 
 *--given-name* NAME, *--name* NAME::
 New (given) name.
 
 *--given-name* NAME, *--name* NAME::
 New (given) name.


@@ -361,31 +657,59 @@ Path to the new avatar image file.
 *--remove-avatar*::
 Remove the avatar
 
 *--remove-avatar*::
 Remove the avatar
 

+*--mobile-coin-address*, **--mobilecoin-address**::
+New MobileCoin address (Base64 encoded public address)
+

 === updateContact
 
 === updateContact
 

-Update the info associated to a number on our contact list.
+Update the info associated to a recipient on our contact list.

 This change is only local but can be synchronized to other devices by using `sendContacts` (see below).
 If the contact doesn't exist yet, it will be added.
 
 This change is only local but can be synchronized to other devices by using `sendContacts` (see below).
 If the contact doesn't exist yet, it will be added.
 

-NUMBER::
-Specify the contact phone number.
+RECIPIENT::
+Specify the recipient.
+
+*--given-name* GIVEN_NAME, *--name* NAME::
+New system given name.
+
+*--family-name* FAMILY_NAME::
+New system family name.
+
+*--nick-given-name* NICK_GIVEN_NAME::
+New nick given name.
+
+*--nick-family-name* NICK_FAMILY_NAME::
+New nick family name.

 
 

-*-n*, *--name*::
-Specify the new name for this contact.
+*--note* NOTE::
+New note.

 
 *-e*, *--expiration* EXPIRATION_SECONDS::
 Set expiration time of messages (seconds).
 To disable expiration set expiration time to 0.
 
 
 *-e*, *--expiration* EXPIRATION_SECONDS::
 Set expiration time of messages (seconds).
 To disable expiration set expiration time to 0.
 

+=== removeContact
+
+Remove the info of a given contact
+
+RECIPIENT::
+Specify the recipient.
+
+*--hide*::
+Hide the contact in the contact list, but keep the data.
+
+*--forget*::
+Delete all data associated with this contact, including identity keys and sessions.
+

 === block
 
 Block the given contacts or groups (no messages will be received).
 This change is only local but can be synchronized to other devices by using `sendContacts` (see below).
 
 === block
 
 Block the given contacts or groups (no messages will be received).
 This change is only local but can be synchronized to other devices by using `sendContacts` (see below).
 

-[CONTACT [CONTACT ...]]::
-Specify the phone numbers of contacts that should be blocked.
+[RECIPIENT [RECIPIENT ...]]::
+Specify the contacts that should be blocked.

 
 

-*-g* [GROUP [GROUP ...]], *--group* [GROUP [GROUP ...]]::
+*-g* [GROUP [GROUP ...]], *--group-id* [GROUP [GROUP ...]]::

 Specify the group IDs that should be blocked in base64 encoding.
 
 === unblock
 Specify the group IDs that should be blocked in base64 encoding.
 
 === unblock


@@ -393,27 +717,27 @@ Specify the group IDs that should be blocked in base64 encoding.
 Unblock the given contacts or groups (messages will be received again).
 This change is only local but can be synchronized to other devices by using `sendContacts` (see below).
 
 Unblock the given contacts or groups (messages will be received again).
 This change is only local but can be synchronized to other devices by using `sendContacts` (see below).
 

-[CONTACT [CONTACT ...]]::
-Specify the phone numbers of contacts that should be unblocked.
+[RECIPIENT [RECIPIENT ...]]::
+Specify the contacts that should be unblocked.

 
 

-*-g* [GROUP [GROUP ...]], *--group* [GROUP [GROUP ...]]::
+*-g* [GROUP [GROUP ...]], *--group-id* [GROUP [GROUP ...]]::

 Specify the group IDs that should be unblocked in base64 encoding.
 
 === sendContacts
 
 Send a synchronization message with the local contacts list to all linked devices.
 Specify the group IDs that should be unblocked in base64 encoding.
 
 === sendContacts
 
 Send a synchronization message with the local contacts list to all linked devices.

-This command should only be used if this is the master device.
+This command should only be used if this is the primary device.

 
 === sendSyncRequest
 
 
 === sendSyncRequest
 

-Send a synchronization request message to the master device (for group, contacts, ...).
-The master device will respond with synchronization messages with full contact and
-group lists.
+Send a synchronization request message to the primary device (for group, contacts, ...).
+The primary device will respond with synchronization messages with full contact and group lists.

 
 === uploadStickerPack
 
 
 === uploadStickerPack
 

-Upload a new sticker pack, consisting of a manifest file and the sticker images.
+Upload a new sticker pack, consisting of a manifest file and the sticker images. +

 Images must conform to the following specification: (see https://support.signal.org/hc/en-us/articles/360031836512-Stickers#sticker_reqs )
 Images must conform to the following specification: (see https://support.signal.org/hc/en-us/articles/360031836512-Stickers#sticker_reqs )

+

 - Static stickers in PNG or WebP format
 - Animated stickers in APNG format,
 - Maximum file size for a sticker file is 300KiB
 - Static stickers in PNG or WebP format
 - Animated stickers in APNG format,
 - Maximum file size for a sticker file is 300KiB


@@ -445,57 +769,176 @@ The required manifest.json has the following format:
 PATH::
 The path of the manifest.json or a zip file containing the sticker pack you wish to upload.
 
 PATH::
 The path of the manifest.json or a zip file containing the sticker pack you wish to upload.
 

+=== listStickerPacks
+
+Show a list of known sticker packs.
+
+=== addStickerPack
+
+Install a sticker pack for this account.
+
+*--uri* [URI]::
+Specify the uri of the sticker pack.
+e.g. https://signal.art/addstickers/#pack_id=XXX&pack_key=XXX
+
+=== getAttachment
+
+Gets the raw data for a specified attachment.
+This is done using the ID of the attachment the recipient or group ID.
+The attachment data is returned as a Base64 String.
+
+*--id* [ID]::
+The ID of the attachment as given in the attachment list of the message.
+
+*--recipient* [RECIPIENT]::
+Specify the recipient which sent the attachment.
+Referred to generally as recipient.
+
+*-g* [GROUP], *--group-id* [GROUP]::
+Alternatively, specify the group IDs for which to get the attachment.
+
+=== getAvatar
+
+Gets the raw data for a specified contact, contact's profile or group avatar.
+The attachment data is returned as a Base64 String.
+
+*--contact* [RECIPIENT]::
+Specify the recipient.
+
+*--profile* [RECIPIENT]::
+Specify the recipient.
+
+*-g* [GROUP], *--group-id* [GROUP]::
+Alternatively, specify the group ID for which to get the avatar.
+
+=== getSticker
+
+Gets the raw data for a specified sticker.
+The attachment data is returned as a Base64 String.
+
+*--pack-id* [PACK_ID]::
+Specify the id of a sticker pack (hex encoded).
+
+*--sticker-id* [STICKER_ID]::
+Specify the index of a sticker in the sticker pack.
+

 === daemon
 
 === daemon
 

-signal-cli can run in daemon mode and provides an experimental dbus interface.
-If no `-u` username is given, all local users will be exported as separate dbus
-objects under the same bus name.
+signal-cli can run in daemon mode and provides JSON-RPC or an experimental dbus interface.
+If no `-a` account is given, all local accounts will be loaded.
+Multiple interfaces can be used at the same time, e.g. `daemon --socket --dbus`
+
+*--socket [SOCKET]*::
+Export a JSON-RPC interface on a UNIX socket (default $XDG_RUNTIME_DIR/signal-cli/socket). +
+See **signal-cli-jsonrpc**(5) for info on the JSON-RPC interface.
+
+*--tcp [HOST:PORT]*::
+Export a JSON-RPC interface on a TCP socket (default localhost:7583). +
+See **signal-cli-jsonrpc**(5) for info on the JSON-RPC interface.
+
+*--http [HOST:PORT]*::
+Expose a JSON-RPC interface as http endpoint (default localhost:8080).
+The JSON-RPC endpoint is `/api/v1/rpc`. +
+See **signal-cli-jsonrpc**(5) for info on the JSON-RPC interface.
+
+*--dbus*::
+Export DBus interface on user bus. +
+See **signal-cli-dbus**(5) for info on the dbus interface.
+
+*--dbus-system*::
+Export DBus interface on system bus. +
+See **signal-cli-dbus**(5) for info on the dbus interface.
+
+*--bus-name*::
+Claim another D-Bus bus name than the default.
+
+*--ignore-attachments*::
+Don’t download attachments of received messages.
+
+*--ignore-stories*::
+Don’t receive story messages from the server.
+
+*--send-read-receipts*::
+Send read receipts for all incoming data messages (in addition to the default delivery receipts)
+
+*--no-receive-stdout*::
+Don’t print received messages to stdout.
+
+*--receive-mode*::
+Specify when to start receiving messages (on-start, on-connection, manual)
+
+=== jsonRpc
+
+Run in signal-cli in JSON-RPC mode.
+Reads JSON-RPC requests on stdin and responds on stdout.
+See **signal-cli-jsonrpc**(5) for info on the JSON-RPC interface.

 
 

-*--system*::
-Use DBus system bus instead of user bus.

 *--ignore-attachments*::
 Don’t download attachments of received messages.
 
 *--ignore-attachments*::
 Don’t download attachments of received messages.
 

+*--ignore-stories*::
+Don’t receive story messages from the server.
+
+*--send-read-receipts*::
+Send read receipts for all incoming data messages (in addition to the default delivery receipts)
+
+*--receive-mode*::
+Specify when to start receiving messages (on-start, manual)
+
+=== submitRateLimitChallenge
+
+When running into rate limits, sometimes the limit can be lifted, by solving a CAPTCHA.
+To get the captcha token, go to https://signalcaptchas.org/challenge/generate.html
+For the staging environment, use: https://signalcaptchas.org/staging/registration/generate.html
+
+*--challenge* CHALLENGE_TOKEN::
+The challenge token from the failed send attempt.
+
+*--captcha* CAPTCHA::
+The captcha result, starting with signalcaptcha://
+

 == Examples
 
 Register a number (with SMS verification)::
 == Examples
 
 Register a number (with SMS verification)::

-signal-cli -u USERNAME register
+signal-cli -a ACCOUNT register

 
 Verify the number using the code received via SMS or voice::
 
 Verify the number using the code received via SMS or voice::

-signal-cli -u USERNAME verify CODE
+signal-cli -a ACCOUNT verify CODE

 
 Send a message to one or more recipients::
 
 Send a message to one or more recipients::

-signal-cli -u USERNAME send -m "This is a message" [RECIPIENT [RECIPIENT ...]] [-a [ATTACHMENT [ATTACHMENT ...]]]
+signal-cli -a ACCOUNT send -m "This is a message" [RECIPIENT [RECIPIENT ...]] [-a [ATTACHMENT [ATTACHMENT ...]]]

 
 Pipe the message content from another process::
 
 Pipe the message content from another process::

-uname -a | signal-cli -u USERNAME send [RECIPIENT [RECIPIENT ...]]
+uname -a | signal-cli -a ACCOUNT send --message-from-stdin [RECIPIENT [RECIPIENT ...]]

 
 Create a group::
 
 Create a group::

-signal-cli -u USERNAME updateGroup -n "Group name" -m [MEMBER [MEMBER ...]]
+signal-cli -a ACCOUNT updateGroup -n "Group name" -m [MEMBER [MEMBER ...]]

 
 Add member to a group::
 
 Add member to a group::

-signal-cli -u USERNAME updateGroup -g GROUP_ID -m "NEW_MEMBER"
+signal-cli -a ACCOUNT updateGroup -g GROUP_ID -m "NEW_MEMBER"

 
 Accept a group invitation::
 
 Accept a group invitation::

-signal-cli -u USERNAME updateGroup -g GROUP_ID
+signal-cli -a ACCOUNT updateGroup -g GROUP_ID

 
 Leave a group::
 
 Leave a group::

-signal-cli -u USERNAME quitGroup -g GROUP_ID
+signal-cli -a ACCOUNT quitGroup -g GROUP_ID

 
 Send a message to a group::
 
 Send a message to a group::

-signal-cli -u USERNAME send -m "This is a message" -g GROUP_ID
+signal-cli -a ACCOUNT send -m "This is a message" -g GROUP_ID

 
 Trust new key, after having verified it::
 
 Trust new key, after having verified it::

-signal-cli -u USERNAME trust -v SAFETY_NUMBER NUMBER
+signal-cli -a ACCOUNT trust -v SAFETY_NUMBER RECIPIENT

 
 Trust new key, without having verified it. Only use this if you don't care about security::
 
 Trust new key, without having verified it. Only use this if you don't care about security::

-signal-cli -u USERNAME trust -a NUMBER
+signal-cli -a ACCOUNT trust -a RECIPIENT

 
 == Exit codes
 
 == Exit codes

+

 * *1*: Error is probably caused and fixable by the user
 * *2*: Some unexpected error
 * *3*: Server or IO error
 * *4*: Sending failed due to untrusted key
 * *1*: Error is probably caused and fixable by the user
 * *2*: Some unexpected error
 * *3*: Server or IO error
 * *4*: Sending failed due to untrusted key

+* *5*: Server rate limiting error

 
 == Files
 
 
 == Files