# Changelog
## [Unreleased]
+
+## [0.9.2] - 2021-10-24
+### Fixed
+- dbus `listNumbers` method works again
+
+### Changed
+- Improved provisioning error handling if the last steps fail
+- Adapt behavior of receive command as dbus client to match normal mode
+- Update captcha url for proof required handling
+
+## [0.9.1] - 2021-10-16
+**Attention**: Now requires native libzkgroup version 0.8
+
+### Added
+- New command `updateConfiguration` which allows setting configurations for linked devices
+- Improved dbus daemon for group handling, groups are now exported as separate dbus objects
+- Linked devices can be managed via dbus
+- New dbus methods sendTyping and sendReadReceipt (Thanks @JtheSaw)
+- New dbus methods submitRateLimitChallenge, isRegistered, listDevices, setExpirationTimer, sendContacts, sendSyncRequest, uploadStickerPack, setPin and removePin (Thanks @John Freed)
+- New dbus method getSelfNumber
+
+### Fixed
+- Do not send message resend request to own device
+- Allow message from pending member to accept group invitations
+- Fix issue which could cause signal-cli to repeatedly send the same delivery receipts
+- Reconnect websocket after connection loss
+
+### Changed
+- Use new provisioning URL `sgnl://linkdevice` instead of `tsdevice:/`
+- The gradle command to build a graalvm native image is now `./gradlew nativeCompile`
+
+## [0.9.0] - 2021-09-12
+**Attention**: Now requires native libsignal-client version 0.9
+
+### Breaking changes
+- Removed deprecated `--json` parameter, use global parameter `--output=json` instead
+- Json output format of `listGroups` command changed:
+ Members are now arrays of `{"number":"...","uuid":"..."}` objects instead of arrays of strings.
+- Removed deprecated fallback data paths, only `$XDG_DATA_HOME/signal-cli` is used now
+ For those still using the old paths (`$HOME/.config/signal`, `$HOME/.config/textsecure`) you need to move those to the new location.
+
+### Added
+- New global parameter `--trust-new-identities=always` to allow trusting any new identity key without verification
+- New parameter `--device-name` for `updateAccount` command to change the device name (also works for the main device)
+- New SignalControl DBus interface, to register/verify/link new accounts
+- New `jsonRpc` command that provides a JSON-RPC based API on stdout/stdin
+- Support for announcement groups
+- New parameter `--set-permission-send-messages` for `updateGroup` to create an announcement group
+- New `sendReceipt` command to send read and viewed receipts
+- Support for receiving sender key messages, mobile apps can now send messages more efficiently with server-side fan-out to groups with signal-cli members.
+- Support for reading data from remote Signal storage. Now v2 groups will be shown after linking a new device.
+- New `submitRateLimitChallenge` command that can be used to lift some rate-limits by solving a captcha
+
+### Fixed
+- Store identity key correctly when sending a message after a recipient has changed keys
+
+## [0.8.5] - 2021-08-07
+### Added
+- Source name is included in JSON receive output (Thanks @technillogue)
+
+### Fixed
+- Allow updateContact command to only set expiration timer without requiring a name parameter
+
+## [0.8.4.1] - 2021-06-20
+### Fixed
+- Incorrect error handling in register command
+
+## [0.8.4] - 2021-06-13
+**Attention**: Now requires native libsignal-client version 0.8.1
+
+### Added
+- New parameters for `updateGroup` command for group v2 features:
+ `--description`, `--remove-member`, `--admin`, `--remove-admin`, `--reset-link`, `--link`, `--set-permission-add-member`, `--set-permission-edit-details`, `--expiration`
+- New `--admin` parameter for `quitGroup` to set an admin before leaving the group
+- New `--delete` parameter for `quitGroup`, to delete the local group data
+- New 'sendTyping' command to send typing indicators
+
+### Fixed
+- Fixed issue that prevented registration with invalid locales
+- Prevent last admin of a group from leaving the group
+- All commands now show a short description with `--help`
+- Now a hint is shown if messages aren't received regularly
+- Group edit conflicts are now resolved automatically
+
+## [0.8.3] - 2021-05-13
+
+### Fixed
+- Upgrading from account files with older profiles
+- Building native image with graalvm
+
+## [0.8.2] - 2021-05-11
+### Added
+- A manual page for the DBus interface (Thanks @bublath, @exquo)
+- Remote message delete command (Thanks @adaptivegarage)
+- sendSyncRequest command to request complete contact/group list from master device
+- New `--delete-account` argument for unregister (Dangerous)
+- New `--family-name` argument for updateProfile
+
+### Fixed
+- Sending reaction to group (Thanks @adaptivegarage)
+- Displaying of address for messages from untrusted identities
+- Handling of recipient number or uuid changes (e.g. after account deletions)
+- Only respond to sync requests from master device
+- Display of quit group messages
+
+### Changed
+- Unlimited strength crypto is now enabled automatically for JREs that require it (Thanks @i-infra)
+- Only one identity key is stored per recipient and updated from profile (to match app behavior)
+- updateContact, block and unblock are now disabled for linked devices
+- After registering an empty profile is created so new groups can be joined immediately
+- If message decryption fails due to a broken session, the session is automatically renewed
+- Rework account storage for better reliability
+- Improved device linking flow
+ - Allow relinking existing account
+ - Encrypt/Decrypt device names
+
+## [0.8.1] - 2021-03-02
+### Added
+- New dbus commands: updateProfile, listNumbers, getContactNumber, quitGroup, isContactBlocked, isGroupBlocked, isMember, joinGroup (Thanks @bublath)
+- Additional output for json format: shared contacts (Thanks @Atomic-Bean)
+- Improved plain text output to be more consistent and synced messages are now indented
+
+### Fixed
+- Issue with broken sessions with linked devices
+
+### Changed
+- Behavior of `trust` command improved, when trusting a new identity key all other known keys for
+ the same number are removed.
+
+## [0.8.0] - 2021-02-14
+**Attention**: For all signal protocol functionality an additional native library is now required: [libsignal-client](https://github.com/signalapp/libsignal-client/).
+See https://github.com/AsamK/signal-cli/wiki/Provide-native-lib-for-libsignal for more information.
+
+### Added
+- Experimental support for building a GraalVM native image
+- Support for setting profile about text and emoji
+
+### Fixed
+- Incorrect error message when removing a non-existent profile avatar
+
+## [0.7.4] - 2021-01-19
+### Changed
+- Notify linked devices after profile has been updated
+
+### Fixed
+- After registering a new account, receiving messages didn't work
+ You may have to register and verify again to fix the issue.
+- Creating v1 groups works again
+
+## [0.7.3] - 2021-01-17
### Added
-- `--verbose` flag to increase log level
+- `getUserStatus` command to check if a user is registered on Signal (Thanks @Atomic-Bean)
+- Global `--verbose` flag to increase log level
+- Global `--output=json` flag, currently supported by `receive`, `daemon`, `getUserStatus`, `listGroups`
+- `--note-to-self` flag for `send` command to send a note to linked devices
+- More info for received messages in json output: stickers, viewOnce, typing, remoteDelete
+
+### Changed
+- signal-cli can now be used without the username `-u` flag
+ For daemon command all local users will be exposed as dbus objects.
+ If only one local user exists, all other commands will use that user,
+ otherwise a user has to be specified.
+- Messages sent to self number will be sent as normal Signal messages again, to
+ send a sync message, use the new `--note-to-self` flag
+- Ignore messages with group context sent by non group member
+- Profile key is sent along with all direct messages
+- In json output unnecessary fields that are null are now omitted
### Fixed
- Disable registration lock before removing the PIN
- Fix PIN hash version to match the official clients.
If you had previously set a PIN you need to set it again to be able to unlock the registration lock later.
+- Issue with saving account file after linking
## [0.7.2] - 2020-12-31
### Added
### Fixed
- Issue where some messages were sent with an old counter index
-## Older
+## [0.6.11] - 2020-10-14
+- Fix issue with receiving message reactions
+
+## [0.6.10] - 2020-09-11
+- Fix issue when retrieving profiles
+- Workaround issue with libzkgroup on platforms other than linux x86_64
+
+## [0.6.9] - 2020-09-10
+- Minor bug fixes and improvements
+- dbus functionality now works on FreeBSD
+- signal-cli now requires Java 11
+
+**Warning: this version only works on Linux x86_64, will be fixed in 0.6.10**
+
+## [0.6.8] - 2020-05-22
+- Switch to hypfvieh dbus-java, which doesn't require a native library anymore (drops requirement of libmatthew-unix-java)
+- Bugfixes for messages with uuids
+- Add `--expiration` parameter to `updateContact` command to set expiration timer
+
+## [0.6.7] - 2020-04-03
+- Send command now returns the timestamp of the sent message
+- DBus daemon: Publish received sync message to SyncMessageReceived signal
+- Fix issue with resolving e164/uuid addresses for sessions
+- Fix pack key length for sticker upload
+
+## [0.6.6] - 2020-03-29
+- Added listContacts command
+- Added block/unblock commands to block contacts and groups
+- Added uploadStickerPack command to upload sticker packs (see man page for more details)
+- Full support for sending and receiving unidentified sender messages
+- Support for message reactions with emojis
+- Internal: support recipients with uuids
+
+## [0.6.5] - 2019-11-11
+Supports receiving messages sent with unidentified sender
+
+## [0.6.4] - 2019-11-02
+- Fix rounding error for attachment ids in json output
+- Add additional info to json output
+- Add commands to update profile name and avatar
+- Add command to update contact names
+
+## [0.6.3] - 2019-09-05
+Bug fixes and small improvements
+
+## [0.6.2] - 2018-12-16
+- Fixes sending of group messages
+
+## [0.6.1] - 2018-12-09
+- Added getGroupIds dbus command
+- Use "NativePRNG" pseudo random number generator, if available
+- Switch default data path:
+ `$XDG_DATA_HOME/signal-cli` (`$HOME/.local/share/signal-cli`)
+ Existing data paths will continue to work (used as fallback)
+
+## [0.6.0] - 2018-05-03
+- Simple json output
+- dbus signal for receiving messages
+- Registration lock PIN
+- Output quoted message
+
+## [0.5.6] - 2017-06-16
+* new listGroups command
+* Support for attachments with file names
+* Support for complete contacts sync
+* Support for contact verification sync
+* DBus interface:
+ * Get/Set group info
+ * Get/Set contact info
+
+## [0.5.5] - 2017-02-18
+- fix receiving messages on linked devices
+- add unregister command
+
+## [0.5.4] - 2017-02-17
+- Fix linking of new devices
+
+## [0.5.3] - 2017-01-29
+* New commandline paramter for receive: --ignore-attachments
+* Updated dependencies
+
+## [0.5.2] - 2016-12-16
+- Add support for group info requests
+- Improve closing of file streams
+
+## [0.5.1] - 2016-11-18
+- Support new safety numbers (https://whispersystems.org/blog/safety-number-updates/)
+- Add a man page
+- Support sending disappearing messages, if the recipient has activated it
+
+## [0.5.0] - 2016-08-29
+- Check if a number is registered on Signal, before adding it to a group
+- Prevent sending to groups that the user has quit
+- Commands to trust new identity keys (see README)
+- Messages from untrusted identities are stored on disk and decrypted when the user trusts the identity
+- Timestamps shown in ISO 8601 format
+
+## [0.4.1] - 2016-07-18
+- Fix issue with creating groups
+- Lock config file to prevent parallel access by multiple instances of signal-cli
+- Improve return codes, always return non-zero code, when sending failed
+
+## [0.4.0] - 2016-06-19
+- Linking to Signal-Desktop and Signal-Android is now possible (Provisioning)
+- Added a contact store, mainly for syncing contacts with linked devices (editing not yet possible via cli)
+- Avatars for groups and contacts are now stored (new folder "avatars" in the config path)
+
+## [0.3.1] - 2016-04-03
+- Fix running with Oracle JRE 8
+- Fix registering
+- Fix unicode warning when compiling with non utf8 locale
+
+## [0.3.0] - 2016-04-02
+- Renamed textsecure-cli to signal-cli, following the rename of libtextsecure-java to libsignal-service-java
+- The experimental dbus interface was also renamed to org.asamk.Signal
+- Upload new prekeys to the server, when there are less than 20 left, prekeys are needed to create new sessions
+
+## [0.2.1] - 2016-02-10
+- Improve dbus service
+- New command line argument --config to specify config directory
+
+## [0.2.0] - 2015-12-30
+Added an experimental dbus interface, for sending and receiving messages (The interface is unstable and may change with future releases).
+
+This release works with Java 7 and 8.
+
+## [0.1.0] - 2015-11-28
+Add support for creating/updating groups and sending to them
+
+## [0.0.5] - 2015-11-21
+- Add receive timeout commandline parameter
+- Show message group info
+
+## [0.0.4] - 2015-09-22
+
+## [0.0.3] - 2015-08-07
-Look at the [release tags](https://github.com/AsamK/signal-cli/releases) for information about older releases.
+## [0.0.2] - 2015-07-08
+First release
git.nmode.ca / signal-cli / blobdiff
