:quotes.~:
= signal-cli (1)
+:doctype: manpage
== Name
For some functionality the Signal protocol requires that all messages have been received from the server.
The `receive` command should be regularly executed.
-In daemon mode messages are continuously received.
+In daemon mode messages are by default continuously received.
== Options
Write log output to the given file.
If `--verbose` is also given, the detailed logs will only be written to the log file.
+*--scrub-log*::
+Scrub possibly sensitive information from the log, like phone numbers and UUIDs.
+
*--config* CONFIG::
Set the path, where to store the config.
Make sure you have full read/write access to the given directory.
- `always`: Trust any new identity key without verification
- `never`: Don't trust any unknown identity key, every key must be verified manually
+*--disable-send-log*::
+Disable message send log (for resending messages that recipient couldn't decrypt).
+
== Commands
=== register
*-v*, *--voice*::
The verification should be done over voice, not SMS.
+Voice verification only works if an SMS verification has been attempted before.
*--captcha*::
The captcha token, required if registration failed with a captcha required error.
To get the token, go to https://signalcaptchas.org/registration/generate.html
For the staging environment, use: https://signalcaptchas.org/staging/registration/generate.html
-Check the developer tools for a redirect starting with signalcaptcha:// Everything after signalcaptcha:// is the captcha token.
+After solving the captcha, right-click on the "Open Signal" link and copy the link.
=== verify
*-n* NAME, *--device-name* NAME::
Set a new device name for the primary or linked device
+*--unrestricted-unidentified-sender* {true,false}::
+Enable if anyone should be able to send you unidentified sender messages.
+
+=== startChangeNumber
+
+Change an account to a new phone number with SMS or voice verification.
+Use the finishChangeNumber command to complete the verification.
+
+NUMBER::
+The new phone number.
+
+*-v*, *--voice*::
+The verification should be done over voice, not SMS.
+Voice verification only works if an SMS verification has been attempted before.
+
+*--captcha*::
+The captcha token, required if registration failed with a captcha required error.
+To get the token, go to https://signalcaptchas.org/registration/generate.html
+For the staging environment, use: https://signalcaptchas.org/staging/registration/generate.html
+After solving the captcha, right-click on the "Open Signal" link and copy the link.
+
+=== finishChangeNumber
+
+Verify the number using the code received via SMS or voice.
+
+NUMBER::
+The new phone number.
+
+*-v*, *--verification-code*::
+The verification code.
+
+*-p* PIN, *--pin* PIN::
+The registration lock PIN, that was set by the user.
+Only required if a PIN was set.
+
=== updateConfiguration
Update signal configs and sync them to linked devices.
*-a* [ATTACHMENT [ATTACHMENT ...]], *--attachment* [ATTACHMENT [ATTACHMENT ...]]::
Add one or more files as attachment.
-Can be either a file path or a data URI. Data URI encoded attachments must follow the RFC 2397.
+Can be either a file path or a data URI.
+Data URI encoded attachments must follow the RFC 2397.
Additionally a file name can be added:
e.g.: `data:<MIME-TYPE>;filename=<FILENAME>;base64,<BASE64 ENCODED DATA>`
Mention another group member (syntax: start:length:recipientNumber) In the apps the mention replaces part of the message text, which is specified by the start and length values.
e.g.: `-m "Hi X!" --mention "3:1:+123456789"`
+*--text-style*::
+Style parts of the message text (syntax: start:length:STYLE).
+Where STYLE is one of: BOLD, ITALIC, SPOILER, STRIKETHROUGH, MONOSPACE
+
+e.g.: `-m "Something BIG!" --text-style "10:3:BOLD"` or for a mixed text style `-m "Something BIG!" --text-style "0:9:ITALIC" "10:3:BOLD"`
+
*--quote-timestamp*::
Specify the timestamp of a previous message with the recipient or group to add a quote to the new message.
*--quote-mention*::
Specify the mentions of the original message (same format as `--mention`).
+*--quote-text-style*::
+Style parts of the original message text (same format as `--text-style`).
+
+*--quote-attachment*::
+Specify the attachments of the original message (syntax: contentType[:filename[:previewFile]]), e.g. 'audio/aac' or 'image/png:test.png:/tmp/preview.jpg'.
+
*--preview-url*::
Specify the url for the link preview.
-The same url must also appear in the message body, otherwise the preview won't be
-displayed by the apps.
+The same url must also appear in the message body, otherwise the preview won't be displayed by the apps.
*--preview-title*::
Specify the title for the link preview (mandatory).
*--preview-image*::
Specify the image file for the link preview (optional).
+*--story-timestamp*::
+Specify the timestamp of a story to reply to.
+
+*--story-author*::
+Specify the number of the author of the story.
+
*-e*, *--end-session*::
Clear session state and send end session message.
+*--edit-timestamp*::
+Specify the timestamp of a previous message with the recipient or group to send an edited message.
+
=== sendPaymentNotification
Send a payment notification.
*-r*, *--remove*::
Remove a reaction.
+*--story*::
+React to a story instead of a normal message
+
=== sendReceipt
Send a read or viewed receipt to a previously received message.
*-t* TIMEOUT, *--timeout* TIMEOUT::
Number of seconds to wait for new messages (negative values disable timeout).
Default is 5 seconds.
+
+*--max-messages*::
+Maximum number of messages to receive, before returning.
+
*--ignore-attachments*::
Don’t download attachments of received messages.
+*--ignore-stories*::
+Don’t receive story messages from the server.
+
+
*--send-read-receipts*::
Send read receipts for all incoming data messages (in addition to the default delivery receipts)
NUMBER::
Specify the contact phone number.
+*--hide*::
+Hide the contact in the contact list, but keep the data.
+
*--forget*::
Delete all data associated with this contact, including identity keys and sessions.
=== uploadStickerPack
-Upload a new sticker pack, consisting of a manifest file and the sticker images.
+Upload a new sticker pack, consisting of a manifest file and the sticker images. +
Images must conform to the following specification: (see https://support.signal.org/hc/en-us/articles/360031836512-Stickers#sticker_reqs )
- Static stickers in PNG or WebP format
PATH::
The path of the manifest.json or a zip file containing the sticker pack you wish to upload.
-=== daemon
+=== listStickerPacks
-signal-cli can run in daemon mode and provides an experimental dbus or JSON-RPC interface.
-If no `-a` account is given, all local accounts will be exported as separate dbus objects under the same bus name.
+Show a list of known sticker packs.
-*--dbus*::
-Export DBus interface on user bus.
-See signal-cli-dbus (5) for info on the dbus interface.
+=== addStickerPack
-*--dbus-system*::
-Export DBus interface on system bus.
-See signal-cli-dbus (5) for info on the dbus interface.
+Install a sticker pack for this account.
+
+*--uri* [URI]::
+Specify the uri of the sticker pack.
+e.g. https://signal.art/addstickers/#pack_id=XXX&pack_key=XXX
+
+=== getAttachment
+
+Gets the raw data for a specified attachment.
+This is done using the ID of the attachment the recipient or group ID.
+The attachment data is returned as a Base64 String.
+
+*--id* [ID]::
+The ID of the attachment as given in the attachment list of the message.
+
+*--recipient* [RECIPIENT]::
+Specify the number which sent the attachment.
+Referred to generally as recipient.
+
+*-g* [GROUP], *--group-id* [GROUP]::
+Alternatively, specify the group IDs for which to get the attachment.
+
+=== daemon
+
+signal-cli can run in daemon mode and provides JSON-RPC or an experimental dbus interface.
+If no `-a` account is given, all local accounts will be loaded.
+Multiple interfaces can be used at the same time, e.g. `daemon --socket --dbus`
*--socket [SOCKET]*::
-Export a JSON-RPC interface on a UNIX socket (default $XDG_RUNTIME_DIR/signal-cli/socket).
-See signal-cli-jsonrpc (5) for info on the JSON-RPC interface.
+Export a JSON-RPC interface on a UNIX socket (default $XDG_RUNTIME_DIR/signal-cli/socket). +
+See **signal-cli-jsonrpc**(5) for info on the JSON-RPC interface.
*--tcp [HOST:PORT]*::
-Export a JSON-RPC interface on a TCP socket (default localhost:7583).
-See signal-cli-jsonrpc (5) for info on the JSON-RPC interface.
+Export a JSON-RPC interface on a TCP socket (default localhost:7583). +
+See **signal-cli-jsonrpc**(5) for info on the JSON-RPC interface.
+
+*--http [HOST:PORT]*::
+Expose a JSON-RPC interface as http endpoint (default localhost:8080).
+The JSON-RPC endpoint is `/api/v1/rpc`. +
+See **signal-cli-jsonrpc**(5) for info on the JSON-RPC interface.
+
+*--dbus*::
+Export DBus interface on user bus. +
+See **signal-cli-dbus**(5) for info on the dbus interface.
+
+*--dbus-system*::
+Export DBus interface on system bus. +
+See **signal-cli-dbus**(5) for info on the dbus interface.
*--ignore-attachments*::
Don’t download attachments of received messages.
+*--ignore-stories*::
+Don’t receive story messages from the server.
+
*--send-read-receipts*::
Send read receipts for all incoming data messages (in addition to the default delivery receipts)
*--receive-mode*::
Specify when to start receiving messages (on-start, on-connection, manual)
+=== jsonRpc
+
+Run in signal-cli in JSON-RPC mode.
+Reads JSON-RPC requests on stdin and responds on stdout.
+See **signal-cli-jsonrpc**(5) for info on the JSON-RPC interface.
+
+*--ignore-attachments*::
+Don’t download attachments of received messages.
+
+*--ignore-stories*::
+Don’t receive story messages from the server.
+
+*--send-read-receipts*::
+Send read receipts for all incoming data messages (in addition to the default delivery receipts)
+
+*--receive-mode*::
+Specify when to start receiving messages (on-start, manual)
+
+=== submitRateLimitChallenge
+
+When running into rate limits, sometimes the limit can be lifted, by solving a CAPTCHA.
+To get the captcha token, go to https://signalcaptchas.org/challenge/generate.html
+For the staging environment, use: https://signalcaptchas.org/staging/registration/generate.html
+
+*--challenge* CHALLENGE_TOKEN::
+The challenge token from the failed send attempt.
+
+*--captcha* CAPTCHA::
+The captcha result, starting with signalcaptcha://
+
== Examples
Register a number (with SMS verification)::
* *2*: Some unexpected error
* *3*: Server or IO error
* *4*: Sending failed due to untrusted key
+* *5*: Server rate limiting error
== Files
git.nmode.ca / signal-cli / blobdiff
