Add icon

[signal-cli] / CHANGELOG.md

diff --git a/CHANGELOG.md b/CHANGELOG.md
index df52b7ef94a691140626d42fcb96860557b544dd..994a048c94648f7231274036e4cc923c8e1a6db6 100644 (file)
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -1,74 +1,215 @@
 # Changelog
 
 ## [Unreleased]
 # Changelog
 
 ## [Unreleased]

-**Attention**: Now requires native libsignal-client version 0.24.0
+
+**Attention**: Now requires Java 21 and libsignal-client version 0.39.2
+
+### Added
+
+- New `--hidden` parameter for `removeContact` command
+- New `--notify-self` parameter for `send` command, for sending a non-sync message when self is part of the recipients
+  or groups.
+
+  Sending to the self number (+XXXX) now behaves the same as the `--note-to-self` parameter. To get the previous
+  behavior, the `--notify-self` parameter can be added
+- New `--unrestricted-unidentified-sender` parameter for `updateAccount command`
+
+### Improved
+
+- Better shutdown handling after Ctrl+C and SIGTERM
+- Implemented full remote storage sync.
+  Provides better contact and settings sync for linked devices.
+
+## [0.12.7] - 2023-12-15
+
+**Attention**: Now requires native libsignal-client version 0.36.1
+
+### Fixes
+
+- Fix linking to an existing account
+
+## [0.12.6] - 2023-12-11
+
+### Fixes
+
+- Fix linking to an existing account
+- Fix migration from old account data
+
+## [0.12.5] - 2023-11-21
+
+### Fixes
+
+- Fix issue with joining groups by group link for new accounts
+- Fix receiving address of shared contact
+- Fix receiving sync edit messages in groups
+
+### Changed
+
+- Create safety numbers based on ACI instead of phone number
+
+## [0.12.4] - 2023-10-22
+
+### Fixes
+
+- Prevent ConcurrentModificationException
+- Update captcha help text
+
+## [0.12.3] - 2023-10-17
+
+### Added
+
+- Added `startChangeNumber` and `finishChangeNumber` commands to switch to another phone number
+- Added `--quote-attachment` parameter to `send` command
+- Added support for scannable safety numbers based on serviceId
+- Added `EditMessageReceived` signal for D-Bus interface
+- Added new exit code `5` for rate limit failures
+- Added full CDSI refresh to get current ACI/PNIs for known numbers regularly
+
+### Fixed
+
+- Correctly respond with delivery receipts for edit messages
+
+### Changed
+
+- JSON-RPC requests are now executed in parallel.
+  Clients should make sure to use the `id` field to get the correct response for a request.
+
+## [0.12.2] - 2023-09-30
+
+**Attention**: Now requires native libsignal-client version 0.32.1

 
 ### Added
 
 ### Added

+
+- Added `--receive-mode` parameter for `jsonRpc` command
+- Add `libsignal_client_path` build property to override libsignal-client jar file
+
+### Changed
+
+- `jsonRpc` command now supports multi-account mode including registering and linking
+
+## [0.12.1] - 2023-08-26
+
+### Added
+
+- New `addStickerPack` command
+
+### Fixed
+
+- Fixed some issues with upgrading from older accounts
+
+### Changed
+
+- Reverted receive notification in JSON-RPC to old format, only explicit subscriptions should use the new format
+
+## [0.12.0] - 2023-08-11
+
+**Attention**: Now requires native libsignal-client version 0.30.0
+
+### Breaking changes
+
+- Adapt receive subscription notification in JSON-RPC to have payload in result field
+    - Before: `{"jsonrpc":"2.0","method":"receive","params":{"envelope":{ ... },"account":"+XXX","subscription":0}}`
+    - After:
+      `{"jsonrpc":"2.0","method":"receive","params":{"subscription":0,"result":{"envelope":{ ... },"account":"+XXX"}}}`
+
+### Added
+
+- Manage identities via DBus (Thanks @bublath)
+- Added support for SVR2 PINs
+
+### Fixed
+
+- Fixed finishLink/receive/register/verify commands for JSON-RPC
+- Update to the latest libsignal to fix various issues
+
+## [0.11.11] - 2023-05-24
+
+**Attention**: Now requires native libsignal-client version 0.25.0
+
+### Added
+

 - New `--text-style` and `--quote-text-style` flags for `send` command
 
 ### Fixed
 - New `--text-style` and `--quote-text-style` flags for `send` command
 
 ### Fixed

+

 - Fixed migration of older account files
 - Fixed migration of older account files

+- Fix deleting old unregistered recipient

 
 ## [0.11.10] - 2023-05-11
 
 ## [0.11.10] - 2023-05-11

+

 **Attention**: Now requires native libsignal-client version 0.23.1
 
 ### Added
 **Attention**: Now requires native libsignal-client version 0.23.1
 
 ### Added

+

 - Support for receiving and sending edit messages with `--edit-timestamp`
 
 ## [0.11.9.1] - 2023-04-23
 
 ### Fixed
 - Support for receiving and sending edit messages with `--edit-timestamp`
 
 ## [0.11.9.1] - 2023-04-23
 
 ### Fixed

+

 - Fix build with Java 20
 
 ## [0.11.9] - 2023-04-22
 
 ### Fixed
 - Fix build with Java 20
 
 ## [0.11.9] - 2023-04-22
 
 ### Fixed

+

 - Workaround issue with linking to newer app versions
 
 ## [0.11.8] - 2023-04-05
 
 ### Added
 - Workaround issue with linking to newer app versions
 
 ## [0.11.8] - 2023-04-05
 
 ### Added

+

 - Added file attachment attributes to JSON output (Thanks @signals-from-outer-space)
 
 ### Fixed
 - Added file attachment attributes to JSON output (Thanks @signals-from-outer-space)
 
 ### Fixed

+

 - Scrub E164 number from dbus paths
 - Fix sending large text messages to multiple recipient
 - Fix deleting old group in dbus mode
 - Fix issue with unknown identity serviceId
 
 ### Improved
 - Scrub E164 number from dbus paths
 - Fix sending large text messages to multiple recipient
 - Fix deleting old group in dbus mode
 - Fix issue with unknown identity serviceId
 
 ### Improved

+

 - Relaxed Content-Type check in http daemon mode (Thanks @cedb)
 
 ## [0.11.7] - 2023-02-19
 - Relaxed Content-Type check in http daemon mode (Thanks @cedb)
 
 ## [0.11.7] - 2023-02-19

+

 **Attention**: Now requires native libsignal-client version 0.22.0
 
 ### Fixed
 **Attention**: Now requires native libsignal-client version 0.22.0
 
 ### Fixed

+

 - Fix issue with missing pni identity key
 - Fix graalvm sqlite issue (Thanks @Marvin A. Ruder)
 - Fix issue with forgetting recipient
 
 ### Changed
 - Fix issue with missing pni identity key
 - Fix graalvm sqlite issue (Thanks @Marvin A. Ruder)
 - Fix issue with forgetting recipient
 
 ### Changed

+

 - Allow JSON-RPC commands without account param if only one account exists
 
 ## [0.11.6] - 2022-12-18
 
 ### Added
 - Allow JSON-RPC commands without account param if only one account exists
 
 ## [0.11.6] - 2022-12-18
 
 ### Added

+

 - Allow using data URIs for updateGroup/updateProfile
 - New alive check endpoint for http daemon (Thanks @ced-b)
 
 ### Fixed
 - Allow using data URIs for updateGroup/updateProfile
 - New alive check endpoint for http daemon (Thanks @ced-b)
 
 ### Fixed

+

 - Registration with voice verification now works if no system locale is set
 - Fixed retrieving attachments in JSON RPC mode (Thanks @ced-b)
 
 ## [0.11.5.1] - 2022-11-09
 
 ### Fixed
 - Registration with voice verification now works if no system locale is set
 - Fixed retrieving attachments in JSON RPC mode (Thanks @ced-b)
 
 ## [0.11.5.1] - 2022-11-09
 
 ### Fixed

+

 - Fix updating from older signal-cli version
 
 ## [0.11.5] - 2022-11-07
 - Fix updating from older signal-cli version
 
 ## [0.11.5] - 2022-11-07

+

 **Attention**: Now requires native libsignal-client version 0.21.1
 
 ### Added
 **Attention**: Now requires native libsignal-client version 0.21.1
 
 ### Added

+

 - Add `--http` flag to `daemon` command to provide a JSON-RPC http endpoint (`/api/v1/rpc`). (Thanks @ced-b)
 - The `receive` method is now also available in JSON-RPC daemon mode, for polling new messages.
 - Add `getAttachment` command to get attachment file base64 encoded. (Thanks @ced-b)
 - Add `--http` flag to `daemon` command to provide a JSON-RPC http endpoint (`/api/v1/rpc`). (Thanks @ced-b)
 - The `receive` method is now also available in JSON-RPC daemon mode, for polling new messages.
 - Add `getAttachment` command to get attachment file base64 encoded. (Thanks @ced-b)


@@ -78,25 +219,30 @@
 - Add `--max-messages` to `receive` command, to only receive a certain number of messages.
 
 ### Changed
 - Add `--max-messages` to `receive` command, to only receive a certain number of messages.
 
 ### Changed

+

 - Send long text messages as attachment instead. This matches the behavior of the official clients.
 - Store attachments with a file extension, for common file types.
 
 ## [0.11.4] - 2022-10-19
 
 ### Added
 - Send long text messages as attachment instead. This matches the behavior of the official clients.
 - Store attachments with a file extension, for common file types.
 
 ## [0.11.4] - 2022-10-19
 
 ### Added

+

 - Approve/Refuse group join requests, using same interface as adding/removing members
 - Add --ignore-stories flag to prevent receiving story messages
 
 ### Fixed
 - Approve/Refuse group join requests, using same interface as adding/removing members
 - Add --ignore-stories flag to prevent receiving story messages
 
 ### Fixed

+

 - Fixed issue with receiving messages that can't be decrypted
 - Do not discard incoming group join messages
 
 ### Improved
 - Fixed issue with receiving messages that can't be decrypted
 - Do not discard incoming group join messages
 
 ### Improved

+

 - Add code to receive new PNI after change number
 
 ## [0.11.3] - 2022-10-07
 
 ### Fixed
 - Add code to receive new PNI after change number
 
 ## [0.11.3] - 2022-10-07
 
 ### Fixed

+

 - Fix sending messages to groups (in non-daemon mode)
 - Fix updating from older signal-cli version
 - Fix issue with handling decryption error message
 - Fix sending messages to groups (in non-daemon mode)
 - Fix updating from older signal-cli version
 - Fix issue with handling decryption error message


@@ -105,162 +251,204 @@
 ## [0.11.2] - 2022-10-06
 
 ### Fixed
 ## [0.11.2] - 2022-10-06
 
 ### Fixed

+

 - Update user agent version to work with new Signal-Server check
 
 ## [0.11.1] - 2022-10-05
 
 ### Fixed
 - Update user agent version to work with new Signal-Server check
 
 ## [0.11.1] - 2022-10-05
 
 ### Fixed

+

 - Fix sending group messages
 - Fix store migration issue on Windows
 - Fix building fat jars
 
 ## [0.11.0] - 2022-10-02
 - Fix sending group messages
 - Fix store migration issue on Windows
 - Fix building fat jars
 
 ## [0.11.0] - 2022-10-02

+

 **Attention**: Now requires native libsignal-client version 0.20.0
 
 ### Breaking changes
 **Attention**: Now requires native libsignal-client version 0.20.0
 
 ### Breaking changes

+

 - Changed meaning of `-v` flag from `--version` to `--verbose`.
   So now extended logging can be achieved with `-vv`.
 - Remove deprecated fallback to reading from stdin if no message body is given.
   To read a message from stdin, use the `--message-from-stdin` flag.
 
 ### Added
 - Changed meaning of `-v` flag from `--version` to `--verbose`.
   So now extended logging can be achieved with `-vv`.
 - Remove deprecated fallback to reading from stdin if no message body is given.
   To read a message from stdin, use the `--message-from-stdin` flag.
 
 ### Added

+

 - Migrate PIN to new KBS enclave when Signal updates it
 - Add `--scrub-log` flag to remove possibly sensitive information from the log
 - Add `sendPaymentNotification` dbus method
 
 ### Fixed
 - Migrate PIN to new KBS enclave when Signal updates it
 - Add `--scrub-log` flag to remove possibly sensitive information from the log
 - Add `sendPaymentNotification` dbus method
 
 ### Fixed

+

 - Fix an issue where messages were sent without sender phone number
 
 ### Changed
 - Fix an issue where messages were sent without sender phone number
 
 ### Changed

+

 - Store data except base account data in sqlite database
 - Use new CDSI for contact discovery in compat mode
 
 ## [0.10.11] - 2022-08-17
 - Store data except base account data in sqlite database
 - Use new CDSI for contact discovery in compat mode
 
 ## [0.10.11] - 2022-08-17

+

 **Attention**: Now requires native libsignal-client version 0.19.3
 
 ### Added
 **Attention**: Now requires native libsignal-client version 0.19.3
 
 ### Added

+

 - Output content of received story messages
 
 ## [0.10.10] - 2022-07-30
 - Output content of received story messages
 
 ## [0.10.10] - 2022-07-30

+

 **Attention**: Now requires native libsignal-client version 0.18.1
 
 ### Fixed
 **Attention**: Now requires native libsignal-client version 0.18.1
 
 ### Fixed

+

 - Fix setPin/removePin commands which broke due to server side changes
 - Workaround GraalVM 22.2.0 issue with daemon connection
 
 ## [0.10.9] - 2022-07-16
 
 ### Changed
 - Fix setPin/removePin commands which broke due to server side changes
 - Workaround GraalVM 22.2.0 issue with daemon connection
 
 ## [0.10.9] - 2022-07-16
 
 ### Changed

+

 - updateAccount command checks self number and PNI after updating account attributes
 
 ### Fixed
 - updateAccount command checks self number and PNI after updating account attributes
 
 ### Fixed

+

 - Fixed small issue with syncing contacts from storage
 - Fixed issue with opening older account files
 
 ## [0.10.8] - 2022-06-13
 
 ### Added
 - Fixed small issue with syncing contacts from storage
 - Fixed issue with opening older account files
 
 ## [0.10.8] - 2022-06-13
 
 ### Added

+

 - Attachments can now be given as data: URIs with base64 data instead of just file paths (Thanks @KevinRoebert)
 - `version` command can now be used on the commandline, in addition to the `--version` flag.
   In the next version the current short form `-v` will change its meaning to `--verbose`!
 
 ### Improved
 - Attachments can now be given as data: URIs with base64 data instead of just file paths (Thanks @KevinRoebert)
 - `version` command can now be used on the commandline, in addition to the `--version` flag.
   In the next version the current short form `-v` will change its meaning to `--verbose`!
 
 ### Improved

+

 - An account can now be registered on both LIVE and STAGING environment in the same config directory.
 - Logging output for registering has been extended.
 
 ## [0.10.7] - 2022-05-29
 
 ### Added
 - An account can now be registered on both LIVE and STAGING environment in the same config directory.
 - Logging output for registering has been extended.
 
 ## [0.10.7] - 2022-05-29
 
 ### Added

+

 - Added profile information to `listContacts` command output
 - Added filter flags for `listContacts` command
 - New `sendPaymentNotification` command to send payment receipt blobs
 - New `--given-name` and `--family-name` parameters for `updateContact` command
 - Implement sending link previews with `--preview-url`, `--preview-title` parameters for the `send` command
 - Added profile information to `listContacts` command output
 - Added filter flags for `listContacts` command
 - New `sendPaymentNotification` command to send payment receipt blobs
 - New `--given-name` and `--family-name` parameters for `updateContact` command
 - Implement sending link previews with `--preview-url`, `--preview-title` parameters for the `send` command

-- New `--send-read-receipts` parameter for `receive` and `daemon` commands for automatically marking received messages as read
+- New `--send-read-receipts` parameter for `receive` and `daemon` commands for automatically marking received messages
+  as read

 
 ### Fixed
 
 ### Fixed

+

 - Issue with endless growing `pre-keys-pni` data directory
 
 ## [0.10.6] - 2022-05-19
 - Issue with endless growing `pre-keys-pni` data directory
 
 ## [0.10.6] - 2022-05-19

+

 **Attention**: Now requires native libsignal-client version 0.17
 
 ### Added
 **Attention**: Now requires native libsignal-client version 0.17
 
 ### Added

+

 - Check if account is used on the environment it was registered (live or staging)
 - New command `deleteLocalAccountData` to delete all local data of an unregistered account
 - New parameter `-g` for `listGroups` command to filter for specific groups
 
 ### Fixed
 - Check if account is used on the environment it was registered (live or staging)
 - New command `deleteLocalAccountData` to delete all local data of an unregistered account
 - New parameter `-g` for `listGroups` command to filter for specific groups
 
 ### Fixed

+

 - Fix deleting a recipient which has no uuid
 
 ### Changed
 - Fix deleting a recipient which has no uuid
 
 ### Changed

+

 - Show warning when sending a message and no profile name has been set.
   (A profile name may become mandatory in the future)
 - After blocking a contact/group the profile key is now rotated
 - Only update profile keys from authoritative group changes
 
 ## [0.10.5] - 2022-04-11
 - Show warning when sending a message and no profile name has been set.
   (A profile name may become mandatory in the future)
 - After blocking a contact/group the profile key is now rotated
 - Only update profile keys from authoritative group changes
 
 ## [0.10.5] - 2022-04-11

+

 **Attention**: Now requires native libsignal-client version 0.15
 
 ### Added
 **Attention**: Now requires native libsignal-client version 0.15
 
 ### Added

+

 - New `--ban`, `--unban` flags for `updateGroup` command to ban users from joining by group link
 
 ### Fixed
 - New `--ban`, `--unban` flags for `updateGroup` command to ban users from joining by group link
 
 ### Fixed

+

 - Fix plain text output of blocked group ids
 - Fix error output in case of rate limiting
 - Fix error when creating a group with no members
 - Fix adding recent Signal-Desktop versions as linked devices
 
 ## [0.10.4.2] - 2022-03-17
 - Fix plain text output of blocked group ids
 - Fix error output in case of rate limiting
 - Fix error when creating a group with no members
 - Fix adding recent Signal-Desktop versions as linked devices
 
 ## [0.10.4.2] - 2022-03-17

+

 ### Fixed
 ### Fixed

+

 - Crash in json output when receiving message from untrusted identity
 - Fix multi account commands for newly created accounts
 
 ## [0.10.4.1] - 2022-03-02
 - Crash in json output when receiving message from untrusted identity
 - Fix multi account commands for newly created accounts
 
 ## [0.10.4.1] - 2022-03-02

+

 ### Fixed
 ### Fixed

+

 - Linking to current apps (which currently don't include a PNI identity yet)
 - Show better error message when --target-timestamp is missing for sendReceipt
 
 ## [0.10.4] - 2022-02-20
 - Linking to current apps (which currently don't include a PNI identity yet)
 - Show better error message when --target-timestamp is missing for sendReceipt
 
 ## [0.10.4] - 2022-02-20

+

 ### Added
 ### Added

+

 - Implement support for change number as linked device
 - Implement support for change number as linked device

-- Add `--message-from-stdin` flag for send command.  The current behavior of
+- Add `--message-from-stdin` flag for send command. The current behavior of

   reading from stdin if the `-m` flag is not given, will be removed in a future
   version.
 
 ### Changed
   reading from stdin if the `-m` flag is not given, will be removed in a future
   version.
 
 ### Changed

+

 - Align receive timeout behavior for dbus client with cli and JSON-RPC.
   Timeout is reset by every incoming message
 - Renamed `error` field in json receive response to `exception`
 
 ### Fixed
 - Align receive timeout behavior for dbus client with cli and JSON-RPC.
   Timeout is reset by every incoming message
 - Renamed `error` field in json receive response to `exception`
 
 ### Fixed

+

 - Prevent a stale jsonrpc connection from interfering with message receiving
 
 ## [0.10.3] - 2022-02-01
 - Prevent a stale jsonrpc connection from interfering with message receiving
 
 ## [0.10.3] - 2022-02-01

+

 ### Added
 ### Added

+

 - MessageSendLog to cache sent message for 24h.
   For resending messages in case the recipient fails to decrypt the message.
 - New global `--log-file` parameter to write logs to a separate file.
   (`--verbose` can be used to increase the log level)
 
 ### Improved
 - MessageSendLog to cache sent message for 24h.
   For resending messages in case the recipient fails to decrypt the message.
 - New global `--log-file` parameter to write logs to a separate file.
   (`--verbose` can be used to increase the log level)
 
 ### Improved

+

 - Better subscription handling for JSON-RPC `subscribeReceive` command
 
 ### Fixed
 - Better subscription handling for JSON-RPC `subscribeReceive` command
 
 ### Fixed

+

 - Output receipt data for unsealed sender receipts again
 - Fix sending message resend requests to devices that happen to have the same deviceId
 
 ## [0.10.2] - 2022-01-22
 - Output receipt data for unsealed sender receipts again
 - Fix sending message resend requests to devices that happen to have the same deviceId
 
 ## [0.10.2] - 2022-01-22

+

 ### Fixed
 ### Fixed

+

 - Archive old sessions/sender keys when a recipient's identity key has changed
 - Fix profile fetch with an invalid LANG variable
 
 ## [0.10.1] - 2022-01-16
 - Archive old sessions/sender keys when a recipient's identity key has changed
 - Fix profile fetch with an invalid LANG variable
 
 ## [0.10.1] - 2022-01-16

+

 ### Added
 ### Added

+

 - Send group messages with sender keys (more efficient for larger groups)
 - New command `listStickerPacks` to display all known sticker packs
 - New flag `--sticker` for `send` command to send stickers
 
 ### Changed
 - Send group messages with sender keys (more efficient for larger groups)
 - New command `listStickerPacks` to display all known sticker packs
 - New flag `--sticker` for `send` command to send stickers
 
 ### Changed

+

 - Improve exit code for message sending.
   Exit with 0 status code if the message was sent successfully to at least
   one recipient, otherwise exit with status code 2 or 4 (for untrusted).
 - Improve exit code for message sending.
   Exit with 0 status code if the message was sent successfully to at least
   one recipient, otherwise exit with status code 2 or 4 (for untrusted).


@@ -270,109 +458,140 @@
 - Rename sandbox to staging environment, to match the upstream name.
 
 ### Fixed
 - Rename sandbox to staging environment, to match the upstream name.
 
 ### Fixed

+

 - The first incoming message after registration can now always be decrypted successfully
 - Ignore decryption failures from blocked contacts and don't send a resend request.
 
 ## [0.10.0] - 2021-12-11
 - The first incoming message after registration can now always be decrypted successfully
 - Ignore decryption failures from blocked contacts and don't send a resend request.
 
 ## [0.10.0] - 2021-12-11

+

 **Attention**: Now requires Java 17 and libsignal-client version 0.11
 
 ### Added
 **Attention**: Now requires Java 17 and libsignal-client version 0.11
 
 ### Added

+

 - The daemon command now provides a JSON-RPC based socket interface (`--socket` and `--tcp`)
 - New daemon command flag `--receive-mode` to configure when messages are received
 - New daemon command flag `--no-receive-stdout` to prevent outputting messages on stdout
 - New command `listAccounts` that lists all registered local accounts
 - New command `removeContact`
 - The daemon command now provides a JSON-RPC based socket interface (`--socket` and `--tcp`)
 - New daemon command flag `--receive-mode` to configure when messages are received
 - New daemon command flag `--no-receive-stdout` to prevent outputting messages on stdout
 - New command `listAccounts` that lists all registered local accounts
 - New command `removeContact`

-- Extend `send` command to allow sending mentions (`--mention`) and quotes (`--quote-timestamp`, `--quote-author`, `--quote-message`, `--quote-mention`)
+- Extend `send` command to allow sending mentions (`--mention`) and
+  quotes (`--quote-timestamp`, `--quote-author`, `--quote-message`, `--quote-mention`)

 - New dbus methods sendGroupTying, unregister, deleteAccount
 - New dbus methods sendGroupTying, unregister, deleteAccount

-- New dbus events MessageReceivedV2, ReceiptReceivedV2, SyncMessageReceivedV2 that provide an extras parameter with additional message info as a key/value map
+- New dbus events MessageReceivedV2, ReceiptReceivedV2, SyncMessageReceivedV2 that provide an extras parameter with
+  additional message info as a key/value map

 - New dbus method sendViewedReceipt (Thanks @John Freed)
 - New dbus object Configuration to read and update configuration values (Thanks @John Freed)
 - Payment info in json receive output (Thanks @technillogue)
 - `-c` alias for `--config` (Thanks @technillogue)
 
 ### Changed
 - New dbus method sendViewedReceipt (Thanks @John Freed)
 - New dbus object Configuration to read and update configuration values (Thanks @John Freed)
 - Payment info in json receive output (Thanks @technillogue)
 - `-c` alias for `--config` (Thanks @technillogue)
 
 ### Changed

+

 - libzkgroup dependency is no longer required
 - libzkgroup dependency is no longer required

-- Renamed `-u` and `--username` flags to `-a` and `--account` to prevent confusion with upcoming Signal usernames. The old flags are also still supported for now.
+- Renamed `-u` and `--username` flags to `-a` and `--account` to prevent confusion with upcoming Signal usernames. The
+  old flags are also still supported for now.

 - Respect phone number sharing mode and unlisted state set by primary device
 - Adapt register command to reactivate account if possible.
 - dbus-java now uses Java 16 native unix sockets, which should provide better cross-platform compatibility
 - Respect phone number sharing mode and unlisted state set by primary device
 - Adapt register command to reactivate account if possible.
 - dbus-java now uses Java 16 native unix sockets, which should provide better cross-platform compatibility

-- If sending to a recipient fails (e.g. unregistered) signal-cli now exits with a success exit code and prints additional information about the failure.
+- If sending to a recipient fails (e.g. unregistered) signal-cli now exits with a success exit code and prints
+  additional information about the failure.

 
 ### Fixed
 
 ### Fixed

+

 - Registering an existing unregistered account now works reliably in daemon mode
 - Fixed an issue with loading some old config files without UUID
 - More reliable send behavior if some recipients are unregistered
 
 ## [0.9.2] - 2021-10-24
 - Registering an existing unregistered account now works reliably in daemon mode
 - Fixed an issue with loading some old config files without UUID
 - More reliable send behavior if some recipients are unregistered
 
 ## [0.9.2] - 2021-10-24

+

 ### Fixed
 ### Fixed

+

 - dbus `listNumbers` method works again
 
 ### Changed
 - dbus `listNumbers` method works again
 
 ### Changed

+

 - Improved provisioning error handling if the last steps fail
 - Adapt behavior of receive command as dbus client to match normal mode
 - Update captcha url for proof required handling
 
 ## [0.9.1] - 2021-10-16
 - Improved provisioning error handling if the last steps fail
 - Adapt behavior of receive command as dbus client to match normal mode
 - Update captcha url for proof required handling
 
 ## [0.9.1] - 2021-10-16

+

 **Attention**: Now requires native libzkgroup version 0.8
 
 ### Added
 **Attention**: Now requires native libzkgroup version 0.8
 
 ### Added

+

 - New command `updateConfiguration` which allows setting configurations for linked devices
 - Improved dbus daemon for group handling, groups are now exported as separate dbus objects
 - Linked devices can be managed via dbus
 - New dbus methods sendTyping and sendReadReceipt (Thanks @JtheSaw)
 - New command `updateConfiguration` which allows setting configurations for linked devices
 - Improved dbus daemon for group handling, groups are now exported as separate dbus objects
 - Linked devices can be managed via dbus
 - New dbus methods sendTyping and sendReadReceipt (Thanks @JtheSaw)

-- New dbus methods submitRateLimitChallenge, isRegistered, listDevices, setExpirationTimer, sendContacts, sendSyncRequest, uploadStickerPack, setPin and removePin (Thanks @John Freed)
+- New dbus methods submitRateLimitChallenge, isRegistered, listDevices, setExpirationTimer, sendContacts,
+  sendSyncRequest, uploadStickerPack, setPin and removePin (Thanks @John Freed)

 - New dbus method getSelfNumber
 
 ### Fixed
 - New dbus method getSelfNumber
 
 ### Fixed

+

 - Do not send message resend request to own device
 - Allow message from pending member to accept group invitations
 - Fix issue which could cause signal-cli to repeatedly send the same delivery receipts
 - Reconnect websocket after connection loss
 
 ### Changed
 - Do not send message resend request to own device
 - Allow message from pending member to accept group invitations
 - Fix issue which could cause signal-cli to repeatedly send the same delivery receipts
 - Reconnect websocket after connection loss
 
 ### Changed

+

 - Use new provisioning URL `sgnl://linkdevice` instead of `tsdevice:/`
 - The gradle command to build a graalvm native image is now `./gradlew nativeCompile`
 
 ## [0.9.0] - 2021-09-12
 - Use new provisioning URL `sgnl://linkdevice` instead of `tsdevice:/`
 - The gradle command to build a graalvm native image is now `./gradlew nativeCompile`
 
 ## [0.9.0] - 2021-09-12

+

 **Attention**: Now requires native libsignal-client version 0.9
 
 ### Breaking changes
 **Attention**: Now requires native libsignal-client version 0.9
 
 ### Breaking changes

+

 - Removed deprecated `--json` parameter, use global parameter `--output=json` instead
 - Json output format of `listGroups` command changed:
   Members are now arrays of `{"number":"...","uuid":"..."}` objects instead of arrays of strings.
 - Removed deprecated fallback data paths, only `$XDG_DATA_HOME/signal-cli` is used now
 - Removed deprecated `--json` parameter, use global parameter `--output=json` instead
 - Json output format of `listGroups` command changed:
   Members are now arrays of `{"number":"...","uuid":"..."}` objects instead of arrays of strings.
 - Removed deprecated fallback data paths, only `$XDG_DATA_HOME/signal-cli` is used now

-  For those still using the old paths (`$HOME/.config/signal`, `$HOME/.config/textsecure`) you need to move those to the new location.
+  For those still using the old paths (`$HOME/.config/signal`, `$HOME/.config/textsecure`) you need to move those to the
+  new location.

 
 ### Added
 
 ### Added

+

 - New global parameter `--trust-new-identities=always` to allow trusting any new identity key without verification
 - New global parameter `--trust-new-identities=always` to allow trusting any new identity key without verification

-- New parameter `--device-name` for `updateAccount` command to change the device name (also works for the primary device)
+- New parameter `--device-name` for `updateAccount` command to change the device name (also works for the primary
+  device)

 - New SignalControl DBus interface, to register/verify/link new accounts
 - New `jsonRpc` command that provides a JSON-RPC based API on stdout/stdin
 - Support for announcement groups
 - New parameter `--set-permission-send-messages` for `updateGroup` to create an announcement group
 - New `sendReceipt` command to send read and viewed receipts
 - New SignalControl DBus interface, to register/verify/link new accounts
 - New `jsonRpc` command that provides a JSON-RPC based API on stdout/stdin
 - Support for announcement groups
 - New parameter `--set-permission-send-messages` for `updateGroup` to create an announcement group
 - New `sendReceipt` command to send read and viewed receipts

-- Support for receiving sender key messages, mobile apps can now send messages more efficiently with server-side fan-out to groups with signal-cli members.
+- Support for receiving sender key messages, mobile apps can now send messages more efficiently with server-side fan-out
+  to groups with signal-cli members.

 - Support for reading data from remote Signal storage. Now v2 groups will be shown after linking a new device.
 - New `submitRateLimitChallenge` command that can be used to lift some rate-limits by solving a captcha
 
 ### Fixed
 - Support for reading data from remote Signal storage. Now v2 groups will be shown after linking a new device.
 - New `submitRateLimitChallenge` command that can be used to lift some rate-limits by solving a captcha
 
 ### Fixed

+

 - Store identity key correctly when sending a message after a recipient has changed keys
 
 ## [0.8.5] - 2021-08-07
 - Store identity key correctly when sending a message after a recipient has changed keys
 
 ## [0.8.5] - 2021-08-07

+

 ### Added
 ### Added

+

 - Source name is included in JSON receive output (Thanks @technillogue)
 
 ### Fixed
 - Source name is included in JSON receive output (Thanks @technillogue)
 
 ### Fixed

+

 - Allow updateContact command to only set expiration timer without requiring a name parameter
 
 ## [0.8.4.1] - 2021-06-20
 - Allow updateContact command to only set expiration timer without requiring a name parameter
 
 ## [0.8.4.1] - 2021-06-20

+

 ### Fixed
 ### Fixed

+

 - Incorrect error handling in register command
 
 ## [0.8.4] - 2021-06-13
 - Incorrect error handling in register command
 
 ## [0.8.4] - 2021-06-13

+

 **Attention**: Now requires native libsignal-client version 0.8.1
 
 ### Added
 **Attention**: Now requires native libsignal-client version 0.8.1
 
 ### Added

+

 - New parameters for `updateGroup` command for group v2 features:
   `--description`, `--remove-member`, `--admin`, `--remove-admin`, `--reset-link`, `--link`, `--set-permission-add-member`, `--set-permission-edit-details`, `--expiration`
 - New `--admin` parameter for `quitGroup` to set an admin before leaving the group
 - New parameters for `updateGroup` command for group v2 features:
   `--description`, `--remove-member`, `--admin`, `--remove-admin`, `--reset-link`, `--link`, `--set-permission-add-member`, `--set-permission-edit-details`, `--expiration`
 - New `--admin` parameter for `quitGroup` to set an admin before leaving the group


@@ -380,6 +599,7 @@
 - New 'sendTyping' command to send typing indicators
 
 ### Fixed
 - New 'sendTyping' command to send typing indicators
 
 ### Fixed

+

 - Fixed issue that prevented registration with invalid locales
 - Prevent last admin of a group from leaving the group
 - All commands now show a short description with `--help`
 - Fixed issue that prevented registration with invalid locales
 - Prevent last admin of a group from leaving the group
 - All commands now show a short description with `--help`


@@ -389,11 +609,14 @@
 ## [0.8.3] - 2021-05-13
 
 ### Fixed
 ## [0.8.3] - 2021-05-13
 
 ### Fixed

+

 - Upgrading from account files with older profiles
 - Building native image with graalvm
 
 ## [0.8.2] - 2021-05-11
 - Upgrading from account files with older profiles
 - Building native image with graalvm
 
 ## [0.8.2] - 2021-05-11

+

 ### Added
 ### Added

+

 - A manual page for the DBus interface (Thanks @bublath, @exquo)
 - Remote message delete command (Thanks @adaptivegarage)
 - sendSyncRequest command to request complete contact/group list from primary device
 - A manual page for the DBus interface (Thanks @bublath, @exquo)
 - Remote message delete command (Thanks @adaptivegarage)
 - sendSyncRequest command to request complete contact/group list from primary device


@@ -401,6 +624,7 @@
 - New `--family-name` argument for updateProfile
 
 ### Fixed
 - New `--family-name` argument for updateProfile
 
 ### Fixed

+

 - Sending reaction to group (Thanks @adaptivegarage)
 - Displaying of address for messages from untrusted identities
 - Handling of recipient number or uuid changes (e.g. after account deletions)
 - Sending reaction to group (Thanks @adaptivegarage)
 - Displaying of address for messages from untrusted identities
 - Handling of recipient number or uuid changes (e.g. after account deletions)


@@ -408,6 +632,7 @@
 - Display of quit group messages
 
 ### Changed
 - Display of quit group messages
 
 ### Changed

+

 - Unlimited strength crypto is now enabled automatically for JREs that require it (Thanks @i-infra)
 - Only one identity key is stored per recipient and updated from profile (to match app behavior)
 - updateContact, block and unblock are now disabled for linked devices
 - Unlimited strength crypto is now enabled automatically for JREs that require it (Thanks @i-infra)
 - Only one identity key is stored per recipient and updated from profile (to match app behavior)
 - updateContact, block and unblock are now disabled for linked devices


@@ -415,44 +640,58 @@
 - If message decryption fails due to a broken session, the session is automatically renewed
 - Rework account storage for better reliability
 - Improved device linking flow
 - If message decryption fails due to a broken session, the session is automatically renewed
 - Rework account storage for better reliability
 - Improved device linking flow

-  - Allow relinking existing account
-  - Encrypt/Decrypt device names
+    - Allow relinking existing account
+    - Encrypt/Decrypt device names

 
 ## [0.8.1] - 2021-03-02
 
 ## [0.8.1] - 2021-03-02

+

 ### Added
 ### Added

-- New dbus commands: updateProfile, listNumbers, getContactNumber, quitGroup, isContactBlocked, isGroupBlocked, isMember, joinGroup (Thanks @bublath)
+
+- New dbus commands: updateProfile, listNumbers, getContactNumber, quitGroup, isContactBlocked, isGroupBlocked,
+  isMember, joinGroup (Thanks @bublath)

 - Additional output for json format: shared contacts (Thanks @Atomic-Bean)
 - Improved plain text output to be more consistent and synced messages are now indented
 
 ### Fixed
 - Additional output for json format: shared contacts (Thanks @Atomic-Bean)
 - Improved plain text output to be more consistent and synced messages are now indented
 
 ### Fixed

+

 - Issue with broken sessions with linked devices
 
 ### Changed
 - Issue with broken sessions with linked devices
 
 ### Changed

+

 - Behavior of `trust` command improved, when trusting a new identity key all other known keys for
   the same number are removed.
 
 ## [0.8.0] - 2021-02-14
 - Behavior of `trust` command improved, when trusting a new identity key all other known keys for
   the same number are removed.
 
 ## [0.8.0] - 2021-02-14

-**Attention**: For all signal protocol functionality an additional native library is now required: [libsignal-client](https://github.com/signalapp/libsignal-client/).
+
+**Attention**: For all signal protocol functionality an additional native library is now
+required: [libsignal-client](https://github.com/signalapp/libsignal-client/).

 See https://github.com/AsamK/signal-cli/wiki/Provide-native-lib-for-libsignal for more information.
 
 ### Added
 See https://github.com/AsamK/signal-cli/wiki/Provide-native-lib-for-libsignal for more information.
 
 ### Added

+

 - Experimental support for building a GraalVM native image
 - Support for setting profile about text and emoji
 
 ### Fixed
 - Experimental support for building a GraalVM native image
 - Support for setting profile about text and emoji
 
 ### Fixed

+

 - Incorrect error message when removing a non-existent profile avatar
 
 ## [0.7.4] - 2021-01-19
 - Incorrect error message when removing a non-existent profile avatar
 
 ## [0.7.4] - 2021-01-19

+

 ### Changed
 ### Changed

+

 - Notify linked devices after profile has been updated
 
 ### Fixed
 - Notify linked devices after profile has been updated
 
 ### Fixed

+

 - After registering a new account, receiving messages didn't work
   You may have to register and verify again to fix the issue.
 - Creating v1 groups works again
 
 ## [0.7.3] - 2021-01-17
 - After registering a new account, receiving messages didn't work
   You may have to register and verify again to fix the issue.
 - Creating v1 groups works again
 
 ## [0.7.3] - 2021-01-17

+

 ### Added
 ### Added

+

 - `getUserStatus` command to check if a user is registered on Signal (Thanks @Atomic-Bean)
 - Global `--verbose` flag to increase log level
 - Global `--output=json` flag, currently supported by `receive`, `daemon`, `getUserStatus`, `listGroups`
 - `getUserStatus` command to check if a user is registered on Signal (Thanks @Atomic-Bean)
 - Global `--verbose` flag to increase log level
 - Global `--output=json` flag, currently supported by `receive`, `daemon`, `getUserStatus`, `listGroups`


@@ -460,6 +699,7 @@ See https://github.com/AsamK/signal-cli/wiki/Provide-native-lib-for-libsignal fo
 - More info for received messages in json output: stickers, viewOnce, typing, remoteDelete
 
 ### Changed
 - More info for received messages in json output: stickers, viewOnce, typing, remoteDelete
 
 ### Changed

+

 - signal-cli can now be used without the username `-u` flag
   For daemon command all local users will be exposed as dbus objects.
   If only one local user exists, all other commands will use that user,
 - signal-cli can now be used without the username `-u` flag
   For daemon command all local users will be exposed as dbus objects.
   If only one local user exists, all other commands will use that user,


@@ -471,32 +711,42 @@ See https://github.com/AsamK/signal-cli/wiki/Provide-native-lib-for-libsignal fo
 - In json output unnecessary fields that are null are now omitted
 
 ### Fixed
 - In json output unnecessary fields that are null are now omitted
 
 ### Fixed

+

 - Disable registration lock before removing the PIN
 - Fix PIN hash version to match the official clients.
   If you had previously set a PIN you need to set it again to be able to unlock the registration lock later.
 - Issue with saving account file after linking
 
 ## [0.7.2] - 2020-12-31
 - Disable registration lock before removing the PIN
 - Fix PIN hash version to match the official clients.
   If you had previously set a PIN you need to set it again to be able to unlock the registration lock later.
 - Issue with saving account file after linking
 
 ## [0.7.2] - 2020-12-31

+

 ### Added
 ### Added

+

 - Implement new registration lock PIN with `setPin` and `removePin` (with KBS)
 - Include quotes, mentions and reactions in json output (Thanks @Atomic-Bean)
 
 ### Fixed
 - Implement new registration lock PIN with `setPin` and `removePin` (with KBS)
 - Include quotes, mentions and reactions in json output (Thanks @Atomic-Bean)
 
 ### Fixed

+

 - Retrieve avatars for v2 groups
 - Download attachment thumbnail for quoted attachments
 
 ## [0.7.1] - 2020-12-21
 - Retrieve avatars for v2 groups
 - Download attachment thumbnail for quoted attachments
 
 ## [0.7.1] - 2020-12-21

+

 ### Added
 ### Added

+

 - Accept group invitation with `updateGroup -g GROUP_ID`
 - Decline group invitation with `quitGroup -g GROUP_ID`
 - Join group via invitation link `joinGroup --uri https://signal.group/#...`
 
 ### Fixed
 - Accept group invitation with `updateGroup -g GROUP_ID`
 - Decline group invitation with `quitGroup -g GROUP_ID`
 - Join group via invitation link `joinGroup --uri https://signal.group/#...`
 
 ### Fixed

+

 - Include group ids for v2 groups in json output
 
 ## [0.7.0] - 2020-12-15
 - Include group ids for v2 groups in json output
 
 ## [0.7.0] - 2020-12-15

+

 ### Added
 ### Added

+

 Support for groups of new type/v2
 Support for groups of new type/v2

+

 - Sending and receiving
 - Updating name, avatar and adding members with `updateGroup`
 - Quit group and decline invitation with `quitGroup`
 - Sending and receiving
 - Updating name, avatar and adding members with `updateGroup`
 - Quit group and decline invitation with `quitGroup`


@@ -506,28 +756,36 @@ Support for groups of new type/v2
 See https://github.com/AsamK/signal-cli/wiki/Provide-native-lib-for-libsignal for more information.
 
 ### Fixed
 See https://github.com/AsamK/signal-cli/wiki/Provide-native-lib-for-libsignal for more information.
 
 ### Fixed

+

 - Rare NullPointerException when receiving messages
 
 ## [0.6.12] - 2020-11-22
 - Rare NullPointerException when receiving messages
 
 ## [0.6.12] - 2020-11-22

+

 ### Added
 ### Added

+

 - Show additional message content (view once, remote delete, mention, …) for received messages
 - `--captcha` parameter for `register` command, required for some IP ranges
 
 ### Changed
 - Show additional message content (view once, remote delete, mention, …) for received messages
 - `--captcha` parameter for `register` command, required for some IP ranges
 
 ### Changed

+

 - Profile keys are now stored separately from contact list
 - Receipts from normal and unidentified messages now have the same format in json output
 
 ### Fixed
 - Profile keys are now stored separately from contact list
 - Receipts from normal and unidentified messages now have the same format in json output
 
 ### Fixed

+

 - Issue where some messages were sent with an old counter index
 
 ## [0.6.11] - 2020-10-14
 - Issue where some messages were sent with an old counter index
 
 ## [0.6.11] - 2020-10-14

+

 - Fix issue with receiving message reactions
 
 ## [0.6.10] - 2020-09-11
 - Fix issue with receiving message reactions
 
 ## [0.6.10] - 2020-09-11

+

 - Fix issue when retrieving profiles
 - Workaround issue with libzkgroup on platforms other than linux x86_64
 
 ## [0.6.9] - 2020-09-10
 - Fix issue when retrieving profiles
 - Workaround issue with libzkgroup on platforms other than linux x86_64
 
 ## [0.6.9] - 2020-09-10

+

 - Minor bug fixes and improvements
 - dbus functionality now works on FreeBSD
 - signal-cli now requires Java 11
 - Minor bug fixes and improvements
 - dbus functionality now works on FreeBSD
 - signal-cli now requires Java 11


@@ -535,17 +793,21 @@ See https://github.com/AsamK/signal-cli/wiki/Provide-native-lib-for-libsignal fo
 **Warning: this version only works on Linux x86_64, will be fixed in 0.6.10**
 
 ## [0.6.8] - 2020-05-22
 **Warning: this version only works on Linux x86_64, will be fixed in 0.6.10**
 
 ## [0.6.8] - 2020-05-22

-- Switch to hypfvieh dbus-java, which doesn't require a native library anymore (drops requirement of libmatthew-unix-java)
+
+- Switch to hypfvieh dbus-java, which doesn't require a native library anymore (drops requirement of
+  libmatthew-unix-java)

 - Bugfixes for messages with uuids
 - Add `--expiration` parameter to `updateContact` command to set expiration timer
 
 ## [0.6.7] - 2020-04-03
 - Bugfixes for messages with uuids
 - Add `--expiration` parameter to `updateContact` command to set expiration timer
 
 ## [0.6.7] - 2020-04-03

+

 - Send command now returns the timestamp of the sent message
 - DBus daemon: Publish received sync message to SyncMessageReceived signal
 - Fix issue with resolving e164/uuid addresses for sessions
 - Fix pack key length for sticker upload
 
 ## [0.6.6] - 2020-03-29
 - Send command now returns the timestamp of the sent message
 - DBus daemon: Publish received sync message to SyncMessageReceived signal
 - Fix issue with resolving e164/uuid addresses for sessions
 - Fix pack key length for sticker upload
 
 ## [0.6.6] - 2020-03-29

+

 - Added listContacts command
 - Added block/unblock commands to block contacts and groups
 - Added uploadStickerPack command to upload sticker packs (see man page for more details)
 - Added listContacts command
 - Added block/unblock commands to block contacts and groups
 - Added uploadStickerPack command to upload sticker packs (see man page for more details)


@@ -554,21 +816,26 @@ See https://github.com/AsamK/signal-cli/wiki/Provide-native-lib-for-libsignal fo
 - Internal: support recipients with uuids
 
 ## [0.6.5] - 2019-11-11
 - Internal: support recipients with uuids
 
 ## [0.6.5] - 2019-11-11

+

 Supports receiving messages sent with unidentified sender
 
 ## [0.6.4] - 2019-11-02
 Supports receiving messages sent with unidentified sender
 
 ## [0.6.4] - 2019-11-02

+

 - Fix rounding error for attachment ids in json output
 - Add additional info to json output
 - Add commands to update profile name and avatar
 - Add command to update contact names
 
 ## [0.6.3] - 2019-09-05
 - Fix rounding error for attachment ids in json output
 - Add additional info to json output
 - Add commands to update profile name and avatar
 - Add command to update contact names
 
 ## [0.6.3] - 2019-09-05

+

 Bug fixes and small improvements
 
 ## [0.6.2] - 2018-12-16
 Bug fixes and small improvements
 
 ## [0.6.2] - 2018-12-16

+

 - Fixes sending of group messages
 
 ## [0.6.1] - 2018-12-09
 - Fixes sending of group messages
 
 ## [0.6.1] - 2018-12-09

+

 - Added getGroupIds dbus command
 - Use "NativePRNG" pseudo random number generator, if available
 - Switch default data path:
 - Added getGroupIds dbus command
 - Use "NativePRNG" pseudo random number generator, if available
 - Switch default data path:


@@ -576,41 +843,49 @@ Bug fixes and small improvements
   Existing data paths will continue to work (used as fallback)
 
 ## [0.6.0] - 2018-05-03
   Existing data paths will continue to work (used as fallback)
 
 ## [0.6.0] - 2018-05-03

+

 - Simple json output
 - dbus signal for receiving messages
 - Registration lock PIN
 - Output quoted message
 
 ## [0.5.6] - 2017-06-16
 - Simple json output
 - dbus signal for receiving messages
 - Registration lock PIN
 - Output quoted message
 
 ## [0.5.6] - 2017-06-16

+

 * new listGroups command
 * Support for attachments with file names
 * Support for complete contacts sync
 * new listGroups command
 * Support for attachments with file names
 * Support for complete contacts sync

-* Support for contact verification sync 
+* Support for contact verification sync

 * DBus interface:
 * DBus interface:

- * Get/Set group info
- * Get/Set contact info
+* Get/Set group info
+* Get/Set contact info

 
 ## [0.5.5] - 2017-02-18
 
 ## [0.5.5] - 2017-02-18

+

 - fix receiving messages on linked devices
 - add unregister command
 
 ## [0.5.4] - 2017-02-17
 - fix receiving messages on linked devices
 - add unregister command
 
 ## [0.5.4] - 2017-02-17

+

 - Fix linking of new devices
 
 ## [0.5.3] - 2017-01-29
 - Fix linking of new devices
 
 ## [0.5.3] - 2017-01-29

-* New commandline paramter for receive: --ignore-attachments
+
+* New commandline parameter for receive: --ignore-attachments

 * Updated dependencies
 
 ## [0.5.2] - 2016-12-16
 * Updated dependencies
 
 ## [0.5.2] - 2016-12-16

+

 - Add support for group info requests
 - Improve closing of file streams
 
 ## [0.5.1] - 2016-11-18
 - Add support for group info requests
 - Improve closing of file streams
 
 ## [0.5.1] - 2016-11-18

+

 - Support new safety numbers (https://whispersystems.org/blog/safety-number-updates/)
 - Add a man page
 - Support sending disappearing messages, if the recipient has activated it
 
 ## [0.5.0] - 2016-08-29
 - Support new safety numbers (https://whispersystems.org/blog/safety-number-updates/)
 - Add a man page
 - Support sending disappearing messages, if the recipient has activated it
 
 ## [0.5.0] - 2016-08-29

+

 - Check if a number is registered on Signal, before adding it to a group
 - Prevent sending to groups that the user has quit
 - Commands to trust new identity keys (see README)
 - Check if a number is registered on Signal, before adding it to a group
 - Prevent sending to groups that the user has quit
 - Commands to trust new identity keys (see README)


@@ -618,38 +893,47 @@ Bug fixes and small improvements
 - Timestamps shown in ISO 8601 format
 
 ## [0.4.1] - 2016-07-18
 - Timestamps shown in ISO 8601 format
 
 ## [0.4.1] - 2016-07-18

+

 - Fix issue with creating groups
 - Lock config file to prevent parallel access by multiple instances of signal-cli
 - Improve return codes, always return non-zero code, when sending failed
 
 ## [0.4.0] - 2016-06-19
 - Fix issue with creating groups
 - Lock config file to prevent parallel access by multiple instances of signal-cli
 - Improve return codes, always return non-zero code, when sending failed
 
 ## [0.4.0] - 2016-06-19

+

 - Linking to Signal-Desktop and Signal-Android is now possible (Provisioning)
 - Added a contact store, mainly for syncing contacts with linked devices (editing not yet possible via cli)
 - Avatars for groups and contacts are now stored (new folder "avatars" in the config path)
 
 ## [0.3.1] - 2016-04-03
 - Linking to Signal-Desktop and Signal-Android is now possible (Provisioning)
 - Added a contact store, mainly for syncing contacts with linked devices (editing not yet possible via cli)
 - Avatars for groups and contacts are now stored (new folder "avatars" in the config path)
 
 ## [0.3.1] - 2016-04-03

+

 - Fix running with Oracle JRE 8
 - Fix registering
 - Fix unicode warning when compiling with non utf8 locale
 
 ## [0.3.0] - 2016-04-02
 - Fix running with Oracle JRE 8
 - Fix registering
 - Fix unicode warning when compiling with non utf8 locale
 
 ## [0.3.0] - 2016-04-02

+

 - Renamed textsecure-cli to signal-cli, following the rename of libtextsecure-java to libsignal-service-java
 - The experimental dbus interface was also renamed to org.asamk.Signal
 - Upload new prekeys to the server, when there are less than 20 left, prekeys are needed to create new sessions
 
 ## [0.2.1] - 2016-02-10
 - Renamed textsecure-cli to signal-cli, following the rename of libtextsecure-java to libsignal-service-java
 - The experimental dbus interface was also renamed to org.asamk.Signal
 - Upload new prekeys to the server, when there are less than 20 left, prekeys are needed to create new sessions
 
 ## [0.2.1] - 2016-02-10

+

 - Improve dbus service
 - New command line argument --config to specify config directory
 
 ## [0.2.0] - 2015-12-30
 - Improve dbus service
 - New command line argument --config to specify config directory
 
 ## [0.2.0] - 2015-12-30

-Added an experimental dbus interface, for sending and receiving messages (The interface is unstable and may change with future releases).
+
+Added an experimental dbus interface, for sending and receiving messages (The interface is unstable and may change with
+future releases).

 
 This release works with Java 7 and 8.
 
 ## [0.1.0] - 2015-11-28
 
 This release works with Java 7 and 8.
 
 ## [0.1.0] - 2015-11-28

+

 Add support for creating/updating groups and sending to them
 
 ## [0.0.5] - 2015-11-21
 Add support for creating/updating groups and sending to them
 
 ## [0.0.5] - 2015-11-21

+

 - Add receive timeout commandline parameter
 - Show message group info
 
 - Add receive timeout commandline parameter
 - Show message group info
 


@@ -658,4 +942,5 @@ Add support for creating/updating groups and sending to them
 ## [0.0.3] - 2015-08-07
 
 ## [0.0.2] - 2015-07-08
 ## [0.0.3] - 2015-08-07
 
 ## [0.0.2] - 2015-07-08

+

 First release
 First release