#' seqB method
#'
-#' This function implements a sequential Bayesian estimation method of R0 due to Bettencourt and Riberio (PloS One, 2008). See details for important implementation notes.
+#' This function implements a sequential Bayesian estimation method of R0 due to
+#' Bettencourt and Riberio (PloS One, 2008). See details for important
+#' implementation notes.
#'
-#'The method sets a uniform prior distribution on R0 with possible values between zero and \code{kappa}, discretized to a fine grid. The distribution of R0 is then updated sequentially, with one update for each new case count observation. The final estimate of R0 is \code{Rhat}, the mean of the (last) posterior distribution.
-#' The prior distribution is the initial belief of the distribution of R0; which in this implementation is the uninformative uniform distribution with values between zero and kappa. Users can change the value of kappa only (ie. the prior distribution cannot be changed from the uniform). As more case counts are observed, the influence of the prior distribution should lessen on the final estimate \code{Rhat}.
+#' The method sets a uniform prior distribution on R0 with possible values
+#' between zero and \code{kappa}, discretized to a fine grid. The distribution
+#' of R0 is then updated sequentially, with one update for each new case count
+#' observation. The final estimate of R0 is \code{Rhat}, the mean of the (last)
+#' posterior distribution. The prior distribution is the initial belief of the
+#' distribution of R0, which is the uninformative uniform distribution with
+#' values between zero and \code{kappa}. Users can change the value of
+#' \code{kappa} only (i.e., the prior distribution cannot be changed from the
+#' uniform). As more case counts are observed, the influence of the prior
+#' distribution should lessen on the final estimate \code{Rhat}.
#'
-#' This method is based on an approximation of the SIR model, which is most valid at the beginning of an epidemic. The method assumes that the mean of the serial distribution (sometimes called the serial interval) is known. The final estimate can be quite sensitive to this value, so sensitivity testing is strongly recommended. Users should be careful about units of time (e.g. are counts observed daily or weekly?) when implementing.
+#' This method is based on an approximation of the SIR model, which is most
+#' valid at the beginning of an epidemic. The method assumes that the mean of
+#' the serial distribution (sometimes called the serial interval) is known. The
+#' final estimate can be quite sensitive to this value, so sensitivity testing
+#' is strongly recommended. Users should be careful about units of time (e.g.,
+#' are counts observed daily or weekly?) when implementing.
#'
-#' Our code has been modified to provide an estimate even if case counts equal to zero are present in some time intervals. This is done by grouping the counts over such periods of time. Without grouping, and in the presence of zero counts, no estimate can be provided.
+#' Our code has been modified to provide an estimate even if case counts equal
+#' to zero are present in some time intervals. This is done by grouping the
+#' counts over such periods of time. Without grouping, and in the presence of
+#' zero counts, no estimate can be provided.
#'
-#' @param NT Vector of case counts
-#' @param mu Mean of the serial distribution (needs to match case counts in time units; for example, if case counts are weekly and the serial distribution has a mean of seven days, then mu should be set to 1=7/7, if case counts are dailty and the serial distribution has a mean of seven days, then mu should be set to seven).
-#' @param kappa Largest possible value of uniform prior, defaults to 20. This describes the prior belief on ranges of R0, so should be set to a higher value if R0 is believed to be larger.
+#' @param NT Vector of case counts.
+#' @param mu Mean of the serial distribution. This needs to match case counts in
+#' time units. For example, if case counts are weekly and the serial
+#' distribution has a mean of seven days, then \code{mu} should be set
+#' to one. If case counts are daily and the serial distribution has a
+#' mean of seven days, then \code{mu} should be set to seven.
+#' @param kappa Largest possible value of uniform prior (defaults to 20). This
+#' describes the prior belief on ranges of R0, and should be set to
+#' a higher value if R0 is believed to be larger.
#'
-#' @return secB returns a list containing the following components: \code{Rhat} is the estimate of R0 (the posterior mean), \code{posterior} is the posterior distribution of R0 from which alternate estimates can be obtained (see examples), \code{group} is an indicator variable (if \code{group=TRUE}, zero values of NT were input and grouping was done to obtain \code{Rhat}), and \code{inputs} is a list of the original input variables \code{NT, gamma, kappa}. The variable \code{posterior} is returned as a list made up of \code{supp} the support of the distribution and \code{pmf} the probability mass function.
+#' @return \code{seqB} returns a list containing the following components:
+#' \code{Rhat} is the estimate of R0 (the posterior mean),
+#' \code{posterior} is the posterior distribution of R0 from which
+#' alternate estimates can be obtained (see examples), and \code{group}
+#' is an indicator variable (if \code{group == TRUE}, zero values of NT
+#' were input and grouping was done to obtain \code{Rhat}). The variable
+#' \code{posterior} is returned as a list made up of \code{supp} (the
+#' support of the distribution) and \code{pmf} (the probability mass
+#' function).
#'
#' @examples
-#'
-#' ## ===================================================== ##
-#' ## Illustrate on weekly data ##
-#' ## ===================================================== ##
+#' # Weekly data.
+#' NT <- c(1, 4, 10, 5, 3, 4, 19, 3, 3, 14, 4)
#'
-#' NT <- c(1, 4, 10, 5, 3, 4, 19, 3, 3, 14, 4)
-#' ## obtain Rhat when serial distribution has mean of five days
-#' res1 <- seqB(NT=NT, mu=5/7)
+#' ## Obtain R0 when the serial distribution has a mean of five days.
+#' res1 <- seqB(NT, mu = 5 / 7)
#' res1$Rhat
-#' ## obtain Rhat when serial distribution has mean of three days
-#' res2 <- seqB(NT=NT, mu=3/7)
+#'
+#' ## Obtain R0 when the serial distribution has a mean of three days.
+#' res2 <- seqB(NT, mu = 3 / 7)
#' res2$Rhat
#'
-#' ## ============================================================= ##
-#' ## Compute posterior mode instead of posterior mean and plot ##
-#' ## ============================================================= ##
+#' # Compute posterior mode instead of posterior mean and plot.
#'
-#' Rpost <- res1$posterior
-#' loc <- which(Rpost$pmf==max(Rpost$pmf))
-#' Rpost$supp[loc] # posterior mode
-#' res1$Rhat # compare with posterior mean
+#' Rpost <- res1$posterior
+#' loc <- which(Rpost$pmf == max(Rpost$pmf))
+#' Rpost$supp[loc] # Posterior mode.
+#' res1$Rhat # Compare with the posterior mean.
#'
-#' par(mfrow=c(2,1), mar=c(2,2,1,1))
-#' plot(Rpost$supp, Rpost$pmf, col="black", type="l", xlab="", ylab="")
-#' abline(h=1/(20/0.01+1), col="red")
-#' abline(v=res1$Rhat, col="blue")
-#' abline(v=Rpost$supp[loc], col="purple")
-#' legend("topright", legend=c("prior", "posterior", "posterior mean (Rhat)", "posterior mode"), col=c("red", "black", "blue", "purple"), lty=1)
-#' plot(Rpost$supp, Rpost$pmf, col="black", type="l", xlim=c(0.5,1.5), xlab="", ylab="")
-#' abline(h=1/(20/0.01+1), col="red")
-#' abline(v=res1$Rhat, col="blue")
-#' abline(v=Rpost$supp[loc], col="purple")
-#' legend("topright", legend=c("prior", "posterior", "posterior mean (Rhat)", "posterior mode"), col=c("red", "black", "blue", "purple"), lty=1)
+#' par(mfrow = c(2, 1), mar = c(2, 2, 1, 1))
#'
-#' ## ========================================================= ##
-#' ## Compute Rhat using only the first five weeks of data ##
-#' ## ========================================================= ##
+#' plot(Rpost$supp, Rpost$pmf, col = "black", type = "l", xlab = "", ylab = "")
+#' abline(h = 1 / (20 / 0.01 + 1), col = "red")
+#' abline(v = res1$Rhat, col = "blue")
+#' abline(v = Rpost$supp[loc], col = "purple")
+#' legend("topright",
+#' legend = c("Prior", "Posterior", "Posterior mean", "Posterior mode"),
+#' col = c("red", "black", "blue", "purple"), lty = 1)
#'
-#'
-#' res3 <- seqB(NT=NT[1:5], mu=5/7) # serial distribution has mean of five days
-#' res3$Rhat
#' @export
+seqB <- function(NT, mu, kappa = 20) {
+ if (length(NT) < 2)
+ print("Warning: length of NT should be at least two.")
+ else {
+ if (min(NT) > 0) {
+ times <- 1:length(NT)
+ tau <- diff(times)
+ }
+ group <- FALSE
+ if (min(NT) == 0) {
+ times <- which(NT > 0)
+ NT <- NT[times]
+ tau <- diff(times)
+ group <- TRUE
+ }
-seqB <- function(NT, mu, kappa=20){
-
- gamma <- 1/mu
-
- if(length(NT)<2) {
- print("Warning: length of NT should be at least two.")
- }
- else{
- if(min(NT)>0){
- times <- 1:length(NT)
- tau <- diff(times)
- }
-
- group <- FALSE
-
- if(min(NT)==0){
- times <- which(NT>0)
- NT <- NT[times]
- tau <- diff(times)
- group <- TRUE
- }
-
- R <- seq(0, kappa, 0.01)
- prior0 <- rep(1,kappa/0.01+1)
- prior0 <- prior0/sum(prior0)
-
- k <- length(NT)-1
- R0.post <- matrix(0, nrow=k, ncol=length(R))
-
- prior <- prior0
- posterior <- seq(0, length(prior0))
-
- for(i in 1:k){
-
- mm1 <- NT[i]
- mm2 <- NT[i+1]
- lambda <- tau[i]*gamma*(R-1)
- lambda <- log(mm1)+lambda
- loglik <- mm2*lambda-exp(lambda)
-
-# numerical issues solve???
+ R <- seq(0, kappa, 0.01)
+ prior0 <- rep(1, kappa / 0.01 + 1)
+ prior0 <- prior0 / sum(prior0)
+ k <- length(NT) - 1
+ R0.post <- matrix(0, nrow = k, ncol = length(R))
+ prior <- prior0
+ posterior <- seq(0, length(prior0))
+ gamma <- 1 / mu
-# if((mm1==0)*(mm2==0)==0){
- maxll <- max(loglik)
- const <- 0
- if(maxll>700){
- const <- maxll-700
- }
- loglik <- loglik-const
-# }
-
-# end numerical issues solve???
-
- posterior <- exp(loglik)*prior
- posterior <- posterior/sum(posterior)
+ for (i in 1:k) {
+ mm1 <- NT[i]
+ mm2 <- NT[i + 1]
+ lambda <- tau[i] * gamma * (R - 1)
+ lambda <- log(mm1) + lambda
+ loglik <- mm2 * lambda - exp(lambda)
+ maxll <- max(loglik)
+ const <- 0
-
- prior <- posterior
-
- }
-
- Rhat <- sum(R*posterior)
-
-return(list(Rhat=Rhat, posterior=list(supp=R, pmf=posterior), group=group, inputs=list(NT=NT, mu=mu, kappa=kappa)))
-}
-}
+ if (maxll > 700)
+ const <- maxll - 700
+ loglik <- loglik - const
+ posterior <- exp(loglik) * prior
+ posterior <- posterior / sum(posterior)
+ prior <- posterior
+ }
+ Rhat <- sum(R * posterior)
+
+ return(list(Rhat = Rhat,
+ posterior = list(supp = R, pmf = posterior),
+ group = group))
+ }
+}
git.nmode.ca / Rnaught / blobdiff
